Nope. It doesn't work without those added lines.
Beiträge von Remus
-
-
thank you!
This is strange, the log says nothing about the amlogic grabber that is working for you now. hm
You are 100% sure that the duplicated entry changed it?
I will double check! I will remove those lines and get back to you. -
The new boblightd
[MEDIA=pastebin]xcdY5qak[/MEDIA]The old(original) boblightd
[MEDIA=pastebin]0RF7ZAna[/MEDIA] -
ahaa it works now with the Brindosch modified hyperiond and those added config lines.
The only issue I have now is that with the modified hyperiond I lost the LEDs on the Kodi menu. But that is something I can live without.The reason I stressed you guys today is that I wanted the hyperion instead of Boblight becasue I noticed since I got the Wetek Core that whenever I fast forward or skip forward (or backwards for that matter…) the video is not playing smooth anymore - it's skipping.
-
so I got it to work by manually editing the .json file and adding these:
"framegrabber" :
{
"width" : 64,
"height" : 64,
"frequency_Hz" : 10.0
},
"amlgrabber": {
"width" : 64,
"height" : 64,
"frequency_Hz" : 10.0
}, -
Nope, not yet.
[MEDIA=pastebin]M1FUAUrs[/MEDIA]
-
Could you provide a hyperion log? just to check that.
Thank you.[MEDIA=pastebin]MULvL7zD[/MEDIA]
-
I have reprogrammed the Arduino.
I can now see the light while on Kodi's menu. But as soon as I start a movie, the LEDs go dark.
I use Adalight for Type. Output: /dev/ttyACM0 and Baudrate: 115,200If you guys need to see the entire hyperion.config.json let me know and I'll pastebin it.
-
The most popular Arduino sketch for it is the Adalight one attached in this guide:
https://hyperion-project.org/t…-ws2801-ws2812b-apa102.8/
Also has sample configurations for Hyperion and you might need to raise the baud rate depending on your setup which is also part of the guide.
Typically with RPi for instance you can connect WS2801 directly but not sure about METEK.
Hi Rick164!
I went thru my archives and found the sketch I uploaded to my Arduino. it's the one from here: https://github.com/adafruit/Ad…aster/Processing/Adalight.
Should I reprogram the Arduino with the one from your link? https://hyperion-project.org/t…-ws2801-ws2812b-apa102.8/ -
Which code do you used for your arduino?
I honestly don't know which sketch I used for Arduino - It was such a long time ago. I configured it for Boblight, which works fine - but I would very much like to switch to Hyperion.
Are there different Arduino sketches for Hyperion or Boblight? -
Thank you so much for your reply Brindosch!
I went back to OpenElec and installed hyperion thru the Hyperion configuration Tool. The installation went fine. I also pushed the config thru the configuration Tool but still no luck. I don't see the light
My hyperion.config.json
[MEDIA=pastebin]Djf1cEKM[/MEDIA]I you need more info from my end let me know.
Thank you so much for your help Brindosch.
-
Hello!
I try the whole day yesterday to make this work without success.
I have the WS2801 LEDs connected to the Arduino which in turn is connected to the Core.
I use LibreElec and their Hyperion add-on.
It works fine with Boblight.Thank you!