Beiträge von Gotcha

    Bonjour,
    La solution vous la donnez vous même : faire en sorte d'avoir un grabber fonctionniel. Soit en faisant en sorte qu'il soit reconnu à l'aide de drivers (ne me demandez pas, Linux et moi sommes incompatible) soit en changeant directement de matériel. Votre grabber a peut-être un problème...

    Hi,


    Thank for your reply.
    Good idea to connect to another USB port but...
    All my USB ports are powered because all my devices are only in "sleep".
    I will try to find a solution ...


    Thanks

    I did not understand why, when my TV was off, I had a rainbow effect with my Ambilight. I thought it was normal.
    Today I decide to remove this static effect, not beautiful.


    By dint of searching I realize that it is not a problem of programming because Hyperion is not planned for that.
    By making a video capture via HyperCon I see that ... there is a signal "rainbow" sent to the Raspberry!



    Now, how to correct this problem because I do not know who produces this image.


    Hardware :

    • Splitter HDMI (Amazon - 16,99€)
    • Converter HDMI to RCA (Amazon - 13,99€)
    • Grabber USB chipset UTV007 (Amazon - 14,69€)
    • Raspberry 2B


    Connections :


    All my video sources are connected to my home theater amplifier.
    The signal comes out and goes directly to the HDMI splitter etc


    My TV (Philips) works with the CEC protocol. When I turn off my TV, I turn off all other devices at the same time and all are in standby.


    Question :


    The question is : where come from this signal and how i can desactivate Hyperion when i have this signal screen.


    Thank you.



    P.S
    Impossible to upload image with the forum's function.

    Bonjour,


    La calibration n'est pas facile car il faut trouver le bon compromis entre une couleur fidèle (à un modèle fixe par exemple) et arriver à reproduire toutes les nuances.
    Entre la couleur du mur, la distance des leds, l'inclinaison si le téléviseur est incliné, la qualité des leds, le traitement par le grabber, la fréquence d'images... Ca en fait des paramètres à gérer !!!


    Une chose à savoir : ce n'est pas en mettant la luminosité à fond que l'on obtient plus de saturation, bien au contraire !
    Aide toi de l'application Android, c'est plus pratique (pour ma part) que l'interface PC.

    Hello,


    I had installed Hyperion on RPI 2 without problems with OSMC. Everything is working.


    Today, for another project, I change my memory card and I use / install Raspbian (the latest version).
    The connection is a Wifi, it was not easy with my USB key ...


    When I ask HyperCon to install Hyperion, I immediately get an error message:


    Code
    SSH Traffic:
    ssh connected
    ssh out:     cd /tmp && wget -nv -N https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
    ssh out:     wget: unable to resolve host address ¬タリraw.github.com¬タル
    ssh out:     rm: cannot remove 'install_hyperion.sh': No such file or directory


    Yes there are very strange symbols.


    I decide to install manually by using the page: wiki.
    But the result is identical:



    Code
    pi@raspberrypi:~ $ curl -k -L --output install_hyperion.sh --get https://raw.githubusercontent.com/hyperion-project/hyperion/master/bin/install_hyperion.sh
      % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                     Dload  Upload   Total   Spent    Left  Speed
      0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (6) Could not resolve host: raw.githubusercontent.com
    pi@raspberrypi:~ $


    Do you have any ideas to help me?
    Thank you.



    *****************************************************
    Translation [FR]
    *****************************************************


    Bonjour,


    J'avais installé sans problème Hyperion sur RPI 2 avec OSMC. Tout fonctionne.


    Aujourd'hui, pour un autre projet, je change de carte mémoire et j'utilise/installe Raspbian (la dernière version en date).
    La connection se fait un Wifi, ce n'était pas facile avec ma clé USB...


    Lorsque je demande à HyperCon d'installer Hyperion, j'ai tout de suite un message d'erreur :


    Code
    SSH Traffic:
    ssh connected
    ssh out:     cd /tmp && wget -nv -N https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
    ssh out:     wget: unable to resolve host address ¬タリraw.github.com¬タル
    ssh out:     rm: cannot remove 'install_hyperion.sh': No such file or directory


    Oui il y a des symboles très étrange.


    Je décide d'installer manuellement en m'aidant de la page : wiki.
    Mais le résultat est identique :


    Code
    pi@raspberrypi:~ $ curl -k -L --output install_hyperion.sh --get https://raw.githubusercontent.com/hyperion-project/hyperion/master/bin/install_hyperion.sh
      % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                     Dload  Upload   Total   Spent    Left  Speed
      0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0curl: (6) Could not resolve host: raw.githubusercontent.com
    pi@raspberrypi:~ $


    Auriez-vous des idées pour m'aider ?
    Merci.