Please post the output of the following commands:
journalctl -u hyperion@pi
journalctl -u hyperion@root
ls /etc/systemd/system
awk -F: '{ print $1}' /etc/passwd
Thank you.
Please post the output of the following commands:
journalctl -u hyperion@pi
journalctl -u hyperion@root
ls /etc/systemd/system
awk -F: '{ print $1}' /etc/passwd
Thank you.
i also tried an ESP32 with WLED, but in hyperion i can only select 490 LEDs and not sure how to change that, i tried Prismatik where i could select UDP with 1500 Leds which kinda works but not on my libreelec.
Nein. Ist vollkommen richtig.
Nach der installation von Hyperion unter LibreELEC liegt Hyperion im Verzeichnis /storage/hyperion
Also findest du die hyperion-remote unter /storage/hyperion/bin
Ändere den Pfad in deinem Script zur hyperion-remote und die parameter die dir pclin gepostet hat.
Sollte dann ungefähr so aussehen:
Wie hast du den Hyperion auf LibreELEC installiert?
I have updated Hyperion. Tomorrow at the latest you can install the nightly version for testing or you can wait. As you like.
Sorry for the misstatement. Just see that 16 days ago the support for your RPi4 was added.I will update the library in Hyperion.You can then use the Nightly Version of Hyperion for testing tomorrow at the latest or wait for the next stable release (no date yet).
It would be nice if you could provide us with your system information from the Hyperion WebUI.
WebUI -> About Hyperion -> System info
Warum fragst du dann wie man es deuten soll? :confused:
Da steht du sollst innerhalb der Zeile 217 bis 219 die Rückgabe auskommentieren.
Also so:
if (DILE_VT_Start(vth) != 0) {
// return -12;
}
Bitte mehr technische Details von der Hardware die du jetzt schon besitzt. Vielen Dank.
Use Xbian with Kodi or LibreELEC 9.2
Also noch mal und nur noch einmal. Boblight ist ein Device spezifisches Protokoll. Die Bilddaten werden im Boblight Sever in LED Daten umgewandelt. Pro Port kann nur 1 DEVICE angesprochen werden. Wenn intern (terminal etc.) mehrere Port verwendet werden können, sind mehrere Devices möglich. Wenn nicht, dann NUR 1 Device.
Danke.
P.S.: Das lässt sich Protokollspezifisch nicht ändern.
und du siehst das ich da nix eingetragen habe. und es läuft trotzdem.
Ganz großes Kino
Na das ist quatsch.. weil Enigmalight keine Config von mir hat wieviele Leds angesprochen werden.. dr liefert Bildmaterial.. wie ein grabber..
Na das ist quatsch.. weil Enigmalight keine Config von mir hat wieviele Leds angesprochen werden.. dr liefert Bildmaterial.. wie ein grabber..
Ich bitte dich. Das Boblight Protokoll läuft per LED Color und nicht per Image.
Das Hauptproblem an Boblight (Enigmalight) Protokoll ist das es Geräte spezifisch ist. Da werden keine Bilder per Netzwerk an Hyperion gesendet sondern die einzelnen Farbinformationen per LED. Das bedeutet, 2 Geräte mit unterschiedlicher Anzahl an LED stimmen nicht überein.
Kann es sein das Boblight nur für ein Gerät funktioniert?
Versuch doch mal für die zweite Instanz einen anderen Port (19334 z.b) und die gleiche Prio 122 zu verwenden.
Natürlich in Enigmalight auch anpassen