Beiträge von Lord-Grey

    @T4gg4rt If I got your general need right, you would like to capture one source, but would like to drive two type of LEDs, correct?
    With Hyperion classic you required two hyperions and forwarding. With Hyperion.NG you only need one installations (but two Instances with Hyperion configured) and no forwarding.


    If I got this right, then you should not ask for quicker forwarding, but how to better use Hyperion.NG capabilities to even reduce complexity in your setup.
    Suggest you look at the overall setup with a fresh pair of eyes :)

    @sand04 Just that we are on the same Page... With Hyperion App are you referred to a mobile App or Hyperion‘s Web UI?
    You need to use the UI.
    If this does not work, please provide details about your installation


    system->about


    Plus a log in debug mode


    system->log


    suggest you enable the debug log,
    Then disable the led-device and enable it again via the remote-control page
    Then share the log output.

    Sorry, if you using multiple instances, you can provide the instance via "--instance instancename" as an additional parameter:
    If you leave it out the default instance is used.


    Code
    ./hyperion-remote --instance 'Nanoleaf' --disable LEDDEVICE


    To see all capabilities of hyperion-remote, just do a


    Code
    ./hyperion-remote --help


    This might give you additional ideas, too ... :)

    Bringen es die Nanoleaf Dinger? 6eckig ist jetzt nicht so meins, aber ich meine es gibt die auch quadratisch .. finde die nur etwas sehr überteuert ..


    Es kommt darauf an, wofür Du die Panels einsetzt. Ich habe die viereckigen Canvas.
    Ich benutze sie vorrangig als Deko-Element (und nicht für ein Ambilight).
    Im Vergleich zu diversen chinesischen Produkten (die mir vorliegen), bin ich nicht traurig über die Investition.
    Auch aus Developersicht sind die Nanoleafs toll.
    Aber ja, sie sind teuer.

    hat es einen Grund, warum sich Settings unter "Remote Control" nicht abspeichern lassen?
    Ich fände es praktisch wenn man zB. Smoothing generell aus lassen könnte.


    Die Fernsteuerung/Remote Control ist immer nur temporär.
    Nichts desto trotz kannst Du jeden Wert auch abspeichern.
    Du musst nur in die jeweilige Konfiguration gehen...


    z.B. Smoothing generell abschalten:


    Konfiguration->Bildverarbeitung->Glättung


    so ist aus:

    Ich hatte mir ein neues Feature überlegt:
    Es wäre doch eigentlich ziemlich cool, wenn man die Led-Layouts zusätzlich zum Rand auch innerhalb des Frames konfigurieren könnte. So würde zb. bei einem schwarzen Bildschirm mit weißer Schrift (zB. im Vorspann) der 2. Led-Rahmen aufleuchten. Oder man definiert mehrere einzelne LED-"Zeilen".


    Du kannst jetzt schon wahlfrei Bereiche des Bildschirms zum Mappen auf LEDs definieren.
    Es gibt zwar keinen Drag & Drop Editor, aber die Möglichkeit der Konfiguration.


    Details siehe hier:
    https://docs.hyperion-project.…/Advanced.html#led-layout


    Hier ein Beispiel, wie ich meine Nanoleaf Panels frei definiert habe.
    Ich hoffe, das gibt Dir ein paar Ideen für Dein eigenes Projekt.



    Couple of points:


    1. Looks like you run HyperHDR and not Hyperion.NG
    Any issues you should address and discuss in the HyperHDR forum/Git etc. and not here.


    Nevertheless, as a bonus:


    2. 'philipshue' signals error: '(2) body contains invalid json, Resource:/lights/5/state'
    Are you running a real Philips Hue-Bridge or an emulation like DIY-Hue?


    3. I suggest you move to Entertainment API mode, as this gives you a better User experience.
    Light updates are far quicker....


    4. There are lots of errors, warnings in the log. I suggest you look at the log file first and resolve those, rather highlighting the a LEDs are off... You should not mix Hyperion.NG and HyperHDR config files.


    Just some key problem that I spotted easily:


    2020-12-21T03:33:18.529Z [hyperiond SETTINGSMGR] (WARNING) Config Fix: [root].instCapture.systemEnable: Removed property: systemEnable
    2020-12-21T03:33:31.260Z [hyperiond DB] (ERROR) Failed to get record: ' WHERE type=? AND hyperion_inst=?' in table: 'settings' Error:
    2020-12-21T03:33:32.822Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'philipshue' signals error: '(2) body contains invalid json, Resource:/lights/5/state'
    2020-12-21T03:36:29.357Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'ws281x' signals error: 'Failed to open. Error message: Selected GPIO not possible'
    2020-12-21T03:39:08.098Z [hyperiond V4L2:/DEV/VIDEO15] (ERROR) Frame index = 2034, inactive or critical VIDIOC_QBUF error in v4l2 driver. Buf index = 3, worker = 0, is_active = 0.