Beiträge von pclin
-
-
OK, then connect the USB output to a PC and test with VLC, for example.
Please also write exactly what you use. Hardware, software, etc.
regards pclin
-
-
For start LED you enter the first LED that should be blacklisted.
So you have to count your LEDs and enter them accordingly.
Trying it out helps.
regards pclin
-
-
The LED could be defective or no contact. I once had an LED that worked again when I pressed it.
Do you have 2 power injections: (at the beginning and at the end of the LED strip)?
regards pclin
-
LG 77 with HDMI Out which model and software?
Without PicCap you need a splitter and grabber. Contet from webos is then usually not possible. Something would probably be possible via HDMI Out, but probably no DRM protected content.
hyperion is available for some devices, RPI, PC, LG, Dreambox and others. Depending on the grabber you need USB 3.0
For switch, splitter, grabber and power supply look here
ThemaSplitter / Matrix / Grabber Übersicht/OverviewÜbersicht von Splitter und Matrix die mit externen Grabbern funktionieren.
Lest euch die Beschreibungen genau durch und prüft ob Sie für euren Anwendungsfall geeignet sind.
DolbyVision kann nicht Scalliert bzw. umgewandelt werden!
Ausnahme HDFury Diva aber nur mit DolbyVision LLDV, das müssen die Quellen dann aber auch unterstützen.
HDR liefert bis auf HDFury Diva ausgewaschene Farben und muss kompensiert werden.
------
Overview of splitter and matrix that work with external grabbers.
Read the…regards pclin
-
This won't be due to Hyperion, check the cabling, connection points (also on the stripe every 50 cm) and the power supply.
How long are the lines and how are they connected?
Levelshifter?
etc.
regards pclin
-
Du kannst einen Preset anlegen und den als Default einstellen.
gruß pclin
-
USB Aufnahme aus
hyperion-remote -a IP -D V4L
USB Aufnahme ein
hyperion-remote -a IP -E V4L
hyperion-remote --help zeigt dir alle Optionen.
gruß pclin
-
Ja hyperion läuft!
systemctl status hyperion@alibi
Mit welchem Browser auf welchem Gerät funktioniert es nicht?
gruß pclin
-
300 SK6812 RGBW
Results:
- LED power consumption: 73.00 W / 14.60 A
- Recommended minimal wire crosssection: 1.5 mm2 (AWG 15)
- Recommended fuse (automotive standard or mini): 20 A (fuse color: yellow)
- Total voltage drop (wire + fuse): 0.278 V
- Recommended number of injections: 3 (at the beginning, at the end of the LED strip and in the middle)
- Power off (standby) consumption: 1.440 W
gruß pclin
ps.
The information in Hyperion refers to the LED stripes with the highest maximum, most stripes require less.
-
Teste in der Konsole ob Hyperion überhaupt startet
/usr/bin/hyperiond
Evtl. die Ausgaben als .txt Datei anhängen.
Zwischen 2.15 und 2.16 gibt es schon deutliche Unterschiede.
Am einfachsten ist Hyperbian zu verwenden und auch die Dokumentation zu nutzen.
gruß pclin
-
Schau mal hier
Turn LEDs Off
curl "http://IP/win&T=0"
Im Plugin HyperionControl (Dreambox) mache ich das mit curl -X SET "http://IP/win&T=1&CY=0&RD=0&SN=0&RN=1"
&RN=0 oder 1
&SN=0 oder 1
musst du zu den jeweiligen WLED's senden.
Am besten kombiniert man Befehle, auch wenn es auf den ersten Blick nicht nötig ist dann ist man aber sicher das genau das passiert was man einstellen möchte.
Im Screenshot siehst z.B. Sync with WLED from TV.
Ist das aktiviert werden andere WLED bei den sync auf ja steht beim ausschalten mit den Effekten oder Farben vom TV synchronisiert.
gruß pclin
ps.
über die WLED app for Android and iOS lässt sich das auch recht schnell einstellen.
-
Cable connection is preferable.
regards pclin
-
root is only required for ws281x PWM.
This is also in the Hyperion log, you just have to read it.
300 SK6812 RGBW require max. 15A.
LED power calculator (wled-calculator.github.io)
regards pclin
-
-
PC operating system?
Have you tested with internal grabber?
regards pclin
-
Splitter = 1 IN 2 OUT
OUT 1 > TV
OUT 2 > Grabber
regards pclin
-
I don't know any of the 3 spitters so all you can do is try and report back.
In terms of features it could be suitable.
regards pclin