Beiträge von Cosmicbase

Cosmicbase · 1. November 2019

Ich steh auf dem Schlauch. Fehlt da etwa eine Datei?

Cosmicbase · 1. November 2019

Bekomme diese Ausgabe.

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 21:37:27 2019 from 192.168.2.30
osmc@osmc:~$ /etc/systemd/system/hyperion.service
-bash: /etc/systemd/system/hyperion.service: No such file or directory
osmc@osmc:~$ sudo systemctl enable hyperion.service
Failed to enable unit: File hyperion.service: No such file or directory
osmc@osmc:~$

Cosmicbase · 1. November 2019

Hmm kannst du mir nicht den fertigen Code posten?

Cosmicbase · 1. November 2019

Ich kann doch nicht rund um die Uhr putty aktivieren.

Cosmicbase · 1. November 2019

Der Hyperion Service muss doch im Hintergrund laufen oder mit Autostart.

Cosmicbase · 1. November 2019

Aber das Problem ist wenn ich mit der app Hyperion aktiviere und mit putty hyperiond kille... Dann kann ich ja das Licht nicht mehr ausmachen. Auch ein Neustart bringt da nix.

Cosmicbase · 1. November 2019

Zitat von Paulchen-Panther

Was meinst du mit komplett?

Sie werden zwar dunkel, aber ein paar wenige leuchten leicht.

Cosmicbase · 1. November 2019

Und wenn ich auf Smartphone putty beende... Kann ich mit Hyperion app nix mehr machen. Kein Farbwechsel nix. Als wie wenn der Dienst gekappt wäre.

Cosmicbase · 1. November 2019

Ok 1 Fehler behoben. Invert war aktiv.
Aber die LEDs lassen sich nicht komplett per App deaktivieren.

Cosmicbase · 1. November 2019

Jo mach ich. Ich kann das Hyperion über die App nicht mehr ausschalten. Ist das normal?

Cosmicbase · 1. November 2019

Ich kann die weitere Funktion nur über Webui testen. Frau schaut gerade TV :facepalm:

Cosmicbase · 1. November 2019

Jupp zumindest über die Hyperion App. Läuft aber Farben sind verkehrt rum. Muss ich invertieren?

Cosmicbase · 1. November 2019

Neue Ausgabe :

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 20:42:06 2019 from 192.168.2.30
osmc@osmc:~$ ls /dev/spidev*
/dev/spidev0.0 /dev/spidev0.1
osmc@osmc:~$ lsmod | grep spi
spi_bcm2835 20480 0
osmc@osmc:~$ hyperiond
[hyperiond EFFECTFILES] <INFO> 36 effects loaded from directory :/effects/
[hyperiond EFFECTFILES] <INFO> 19 effect schemas loaded from directory :/effects/schema/
[hyperiond EFFECTFILES] <INFO> 0 effects loaded from directory /home/osmc/.hyperion/custom-effects
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:101:SettingsManager()> Settings database initialized
[hyperiond BLACKBORDER] <DEBUG> <BlackBorderProcessor.cpp:65:handleSettingsUpdate()> Set mode to: default
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:67:componentStateChanged()> Blackborder detector: enabled
[hyperiond DAEMON] <INFO> set screen capture device to 'dispmanx'
[hyperiond DISPMANXGRABBER] <DEBUG> <Grabber.cpp:33:setVideoMode()> Set videomode to 0
[hyperiond DISPMANXGRABBER] <INFO> Display opened with resolution: 1280x720
[hyperiond DISPMANXGRABBER] <DEBUG> <Grabber.cpp:82:setWidthHeight()> Set new width: 80, height: 45 for capture
[hyperiond DAEMON] <INFO> DISPMANX frame grabber created
[hyperiond V4L2:auto] <DEBUG> <Grabber.cpp:33:setVideoMode()> Set videomode to 0
[hyperiond V4L2:auto] <INFO> Signal threshold set to: {12, 12, 12}
[hyperiond V4L2:auto] <INFO> Signal detection is now disabled
[hyperiond V4L2:auto] <INFO> Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
[hyperiond DAEMON] <DEBUG> <hyperiond.cpp:434:handleSettingsUpdate()> V4L2 grabber created
[hyperiond JSONSERVER] <DEBUG> <JsonServer.cpp:25:JsonServer()> Created instance
[hyperiond JSONSERVER] <INFO> Started on port 19444
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:67:componentStateChanged()> LED device: enabled
[hyperiond LEDDEVICE] <INFO> LedDevice 'ws2801' configured.
[hyperiond FLATBUFSERVER] <INFO> Started on port 19400
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:48:open()> _baudRate_Hz 1000000, _latchTime_ns 1
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:49:open()> _spiDataInvert 1, _spiMode 0
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:67:componentStateChanged()> Smoothing: enabled
[hyperiond FLATBUFCONNECTION] <INFO> Connecting to Hyperion: 127.0.0.1:19401
[hyperiond EFFECTENGINE] <INFO> run effect Rainbow swirl fast on channel 0
[hyperiond PROTOSERVER] <INFO> Started on port 19445
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:153:registerInput()> Register new input 'System/EFFECT' with priority 0 as inactive
[hyperiond HYPERION] <INFO> Initial foreground effect 'Rainbow swirl fast' started
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:153:registerInput()> Register new input 'System/GRABBER' with priority 250 as inactive
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:67:componentStateChanged()> Framegrabber: enabled
[hyperiond BOBLIGHT] <DEBUG> <BoblightServer.cpp:28:BoblightServer()> Instance created
[hyperiond HYPERION] <INFO> Hyperion instance 'First LED Hardware instance' has been started
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:105:handleSettingsUpdate()> Set document root to: :/webconfig
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:105:handleSettingsUpdate()> Set document root to: :/webconfig
[hyperiond WEBSERVER] <INFO> Started on port 8090 name 'Hyperion Webserver'
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:171:handleSettingsUpdate()> Setup SSL certificate
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:187:handleSettingsUpdate()> Setup private SSL key
[hyperiond WEBSERVER] <INFO> Started on port 8092 name 'Hyperion Webserver'
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:233:setInputImage()> Priority 250 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visible priority to 0
"No carrier"
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:233:setInputImage()> Priority 0 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:293:setCurrentTime()> Timeout clear for priority 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visible priority to 250
"No carrier"

Cosmicbase · 1. November 2019

Der webui ist immer noch erst nach putty hyperiond erreichbar.

Ich habe als Ausgabe spidev0.0 und WS2801 hinterlegt.

Cosmicbase · 1. November 2019

Das ist die andere Ausgabe:

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 20:42:06 2019 from 192.168.2.30
osmc@osmc:~$ ls /dev/spidev*
/dev/spidev0.0 /dev/spidev0.1
osmc@osmc:~$ lsmod | grep spi
spi_bcm2835 20480 0
osmc@osmc:~$

Cosmicbase · 1. November 2019

Zitat von Paulchen-Panther

https://prnt.sc/pr9vpg

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 20:42:06 2019 from 192.168.2.30
osmc@osmc:~$ ls /dev/spidev*
/dev/spidev0.0 /dev/spidev0.1
osmc@osmc:~$

Cosmicbase · 1. November 2019

Das ist die Ausgabe wenn ich hyperiond in putty starte.

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 18:54:04 2019 from 192.168.2.52
osmc@osmc:~$ ls /dev/spidev*
ls: cannot access '/dev/spidev*': No such file or directory
osmc@osmc:~$ lsmod | grep spi
osmc@osmc:~$ ls /dev/spidev*
ls: cannot access '/dev/spidev*': No such file or directory
osmc@osmc:~$ lsmod | grep spi
osmc@osmc:~$ hyperiond
[hyperiond EFFECTFILES] <INFO> 36 effects loaded from directory :/effects/
[hyperiond EFFECTFILES] <INFO> 19 effect schemas loaded from directory :/effects/schema/
[hyperiond EFFECTFILES] <INFO> 0 effects loaded from directory /home/osmc/.hyperion/custom-effects
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:101:SettingsManager()> Settings database initialized
[hyperiond BLACKBORDER] <DEBUG> <BlackBorderProcessor.cpp:65:handleSettingsUpdate()> Set mode to: default
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:67:componentStateChanged()> Blackborder detector: enabled
[hyperiond DAEMON] <INFO> set screen capture device to 'dispmanx'
[hyperiond DISPMANXGRABBER] <DEBUG> <Grabber.cpp:33:setVideoMode()> Set videomode to 0
[hyperiond DISPMANXGRABBER] <INFO> Display opened with resolution: 1920x1080
[hyperiond DISPMANXGRABBER] <DEBUG> <Grabber.cpp:82:setWidthHeight()> Set new width: 80, height: 45 for capture
[hyperiond DAEMON] <INFO> DISPMANX frame grabber created
[hyperiond V4L2:auto] <DEBUG> <Grabber.cpp:33:setVideoMode()> Set videomode to 0
[hyperiond V4L2:auto] <INFO> Signal threshold set to: {12, 12, 12}
[hyperiond V4L2:auto] <INFO> Signal detection is now disabled
[hyperiond V4L2:auto] <INFO> Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
[hyperiond DAEMON] <DEBUG> <hyperiond.cpp:434:handleSettingsUpdate()> V4L2 grabber created
[hyperiond JSONSERVER] <DEBUG> <JsonServer.cpp:25:JsonServer()> Created instance
[hyperiond JSONSERVER] <INFO> Started on port 19444
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:67:componentStateChanged()> LED device: enabled
[hyperiond LEDDEVICE] <INFO> LedDevice 'ws2801' configured.
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:48:open()> _baudRate_Hz 1000000, _latchTime_ns 1
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:49:open()> _spiDataInvert 1, _spiMode 0
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:67:componentStateChanged()> Smoothing: enabled
[hyperiond LEDDEVICE] <ERROR> Failed to open device (/dev/spidev0.0). Error message: No such file or directory
[hyperiond FLATBUFCONNECTION] <INFO> Connecting to Hyperion: 127.0.0.1:19401
[hyperiond EFFECTENGINE] <INFO> run effect Rainbow swirl fast on channel 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:153:registerInput()> Register new input 'System/EFFECT' with priority 0 as inactive
[hyperiond HYPERION] <INFO> Initial foreground effect 'Rainbow swirl fast' started
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:153:registerInput()> Register new input 'System/GRABBER' with priority 250 as inactive
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:67:componentStateChanged()> Framegrabber: enabled
[hyperiond FLATBUFSERVER] <INFO> Started on port 19400
[hyperiond BOBLIGHT] <DEBUG> <BoblightServer.cpp:28:BoblightServer()> Instance created
[hyperiond PROTOSERVER] <INFO> Started on port 19445
[hyperiond HYPERION] <INFO> Hyperion instance 'First LED Hardware instance' has been started
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:105:handleSettingsUpdate()> Set document root to: :/webconfig
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:105:handleSettingsUpdate()> Set document root to: :/webconfig
[hyperiond WEBSERVER] <INFO> Started on port 8090 name 'Hyperion Webserver'
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:171:handleSettingsUpdate()> Setup SSL certificate
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:187:handleSettingsUpdate()> Setup private SSL key
[hyperiond WEBSERVER] <INFO> Started on port 8092 name 'Hyperion Webserver'
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:233:setInputImage()> Priority 250 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visible priority to 0
"No carrier"
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:233:setInputImage()> Priority 0 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:293:setCurrentTime()> Timeout clear for priority 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visible priority to 250
"No carrier"
"No carrier"
"No carrier"
"No carrier"

Cosmicbase · 1. November 2019

Zum Thema Hyperion.NG :

Ich finde eure Arbeit Mega. Kein Vergleich zu Hypercon.
Vielleicht beseitigt das Hyperion.ng auch die Probleme mit Netflix und Amazon. Bei dem alten Hyperion waren da immer diese schwarzen Bildaussetzer.

Eine Installation Anleitung Hyperion.ng für OSMC wäre da auch hilfreich.
Im GIT ist die Anleitung so ein bisschen zusammen gewürfelt.
Da wäre auch für Anfänger mehr möglich.

Habe bisher immer das alte Hyperion gehabt und mich nun entschieden das System platt zu machen.

Ein Neustart war das Motto

Cosmicbase · 1. November 2019

Zitat von Paulchen-Panther
Was sagt die Ausgabe von:
Code
ls /dev/spidev*
Code
lsmod | grep spi

Zu 1.

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 18:54:04 2019 from 192.168.2.52
osmc@osmc:~$ ls /dev/spidev*
ls: cannot access '/dev/spidev*': No such file or directory
osmc@osmc:~$

Zu 2.

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 18:54:04 2019 from 192.168.2.52
osmc@osmc:~$ ls /dev/spidev*
ls: cannot access '/dev/spidev*': No such file or directory
osmc@osmc:~$ lsmod | grep spi
osmc@osmc:~$

Wie gesagt ich komme nur auf meine WebUi wenn ich per putty hyperiond ausführe. Sobald ich putty schließe komme ich auf den WebUi nicht mehr drauf.

Cosmicbase · 1. November 2019

Die LED Visualisierung mit Live Video vom internen Grabber funktioniert schon mal.
Auch wenn ich mit der Hyperion App spiele bekomme ich im WebUi eine Ausgabe.
Ports stehen soweit.
Nur die Ausgabe an die LEDs passt nicht.
Mir scheint auch der Autostart zu fehlen.
Ich muss für das erreichen des WebUi immer hyperiond per putty manuell starten.
Muss ich in Pi Config was ändern von wegen GPIO?