Danke, funktioniert wieder einwandfrei
Beiträge von u20p17
-
-
Hi,
habe nun die neueste Version installiert und den raspbi neu gestartet --> funktioniert wieder nicht.pi@raspberrypi:~ $ sudo netstat -tanp
Aktive Internetverbindungen (Server und stehende Verbindungen)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:8088 0.0.0.0:* LISTEN 904/deCONZ
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 904/deCONZ
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 570/sshd
tcp 0 0 127.0.0.1:39078 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39036 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38960 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39118 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:37782 127.0.0.1:32809 VERBUNDEN 533/homebridge
tcp 0 0 127.0.0.1:39024 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39058 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:80 10.0.0.10:41070 VERBUNDEN 904/deCONZ
tcp 0 0 10.0.0.10:8088 10.0.0.15:53169 VERBUNDEN 904/deCONZ
tcp 0 0 127.0.0.1:39048 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39092 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39066 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39112 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39110 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39034 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38986 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39084 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39046 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39072 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39002 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39030 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39012 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39098 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39042 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38998 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38980 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38978 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38988 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39052 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39006 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39056 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39068 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39094 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39028 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:8088 10.0.0.10:47922 VERBUNDEN 904/deCONZ
tcp 0 0 127.0.0.1:39000 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39018 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39106 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38994 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38974 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39114 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39104 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:41070 10.0.0.10:80 VERBUNDEN 533/homebridge
tcp 0 0 127.0.0.1:39100 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39032 127.0.0.1:80 TIME_WAIT -
tcp 0 3104 10.0.0.10:22 10.0.0.15:53184 VERBUNDEN 1880/sshd: pi [priv
tcp 0 0 10.0.0.10:47922 10.0.0.10:8088 VERBUNDEN 533/homebridge
tcp 0 0 127.0.0.1:38958 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39070 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38970 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39050 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39026 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39020 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:51986 172.217.16.116:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39096 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38972 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39116 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38976 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38984 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38982 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39074 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39082 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:49554 35.158.19.84:443 VERBUNDEN 533/homebridge
tcp 0 0 127.0.0.1:38968 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39022 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39060 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39044 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39076 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39108 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39010 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39080 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38996 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:38962 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39004 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39102 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39008 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:80 10.0.0.15:53167 VERBUNDEN 904/deCONZ
tcp 0 0 127.0.0.1:39086 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:39054 127.0.0.1:80 TIME_WAIT -
tcp6 0 0 :::443 :::* LISTEN 614/domoticz
tcp6 0 0 :::6144 :::* LISTEN 614/domoticz
tcp6 0 0 :::8070 :::* LISTEN 614/domoticz
tcp6 0 0 :::32809 :::* LISTEN 533/homebridge
tcp6 0 0 :::8080 :::* LISTEN 1129/homebridge-con
tcp6 0 0 :::51826 :::* LISTEN 533/homebridge
tcp6 0 0 :::22 :::* LISTEN 570/sshd
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60134 TIME_WAIT -
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60206 TIME_WAIT -
tcp6 0 0 127.0.0.1:42411 127.0.0.1:43298 TIME_WAIT -
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60182 TIME_WAIT -
tcp6 0 0 127.0.0.1:44347 127.0.0.1:37406 TIME_WAIT -
tcp6 0 0 10.0.0.10:8070 10.0.0.15:53109 VERBUNDEN 614/domoticz
tcp6 0 0 127.0.0.1:37507 127.0.0.1:55882 TIME_WAIT -
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60232 TIME_WAIT -
tcp6 0 0 127.0.0.1:45377 127.0.0.1:57556 TIME_WAIT -
tcp6 0 0 127.0.0.1:32809 127.0.0.1:37782 VERBUNDEN 533/homebridge
tcp6 0 0 10.0.0.10:51826 10.0.0.6:62680 VERBUNDEN 533/homebridge
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60158 TIME_WAIT -
tcp6 0 0 127.0.0.1:51826 127.0.0.1:60108 TIME_WAIT -
tcp6 0 0 10.0.0.10:8080 10.0.0.15:53140 VERBUNDEN 1129/homebridge-con
tcp6 0 0 127.0.0.1:43919 127.0.0.1:52562 TIME_WAIT -
tcp6 0 0 127.0.0.1:45833 127.0.0.1:38264 TIME_WAIT -pi@raspberrypi:~ $ hyperiond -d
[hyperiond MAIN] <INFO> Set user data path to '/home/pi/.hyperion'
[hyperiond DAEMON] <DEBUG> <PythonInit.cpp:45:PythonInit()> Initializing Python interpreter
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:108:SettingsManager()> Settings database initialized
[hyperiond EFFECTFILES] <INFO> 39 effects loaded from directory :/effects/
[hyperiond EFFECTFILES] <INFO> 22 effect schemas loaded from directory :/effects /schema/
[hyperiond EFFECTFILES] <INFO> 0 effects loaded from directory /home/pi/.hyperio n/custom-effects
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:108:SettingsManager()> Settings database initialized
[hyperiond BLACKBORDER] <DEBUG> <BlackBorderProcessor.cpp:65:handleSettingsUpdat e()> Set mode to: default
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentS tate()> Blackborder detector: enabled
[hyperiond DAEMON] <INFO> set screen capture device to 'dispmanx'
[hyperiond DAEMON] <ERROR> The dispmanx framegrabber can not be instantiated, be cause it has been left out from the build
[hyperiond V4L2:auto] <DEBUG> <Grabber.cpp:34:setVideoMode()> Set videomode to 0
[hyperiond V4L2:auto] <INFO> Signal threshold set to: {12, 12, 12}
[hyperiond V4L2:auto] <INFO> Signal detection is now disabled
[hyperiond V4L2:auto] <INFO> Signal detection area set to: 0.250000,0.250000 x 0 .750000,0.750000
[hyperiond DAEMON] <DEBUG> <hyperiond.cpp:484:handleSettingsUpdate()> V4L2 grabb er created
[hyperiond LEDDEVICE] <INFO> LedDevice 'apa102' found.
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:55:open()> _baudRate_Hz [1000000] , _latchTime_ms [0]
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:56:open()> _spiDataInvert [0], _s piMode [0]
[hyperiond JSONSERVER] <DEBUG> <JsonServer.cpp:27:JsonServer()> Created instance
[hyperiond FLATBUFCONNECTION] <INFO> Connecting to Hyperion: 127.0.0.1:19401
[hyperiond JSONSERVER] <INFO> Started on port 19444
[hyperiond EFFECTENGINE] <INFO> Run effect "Rainbow swirl fast" on channel 0
[hyperiond FLATBUFSERVER] <INFO> Started on port 19400
[hyperiond PROTOSERVER] <INFO> Started on port 19445
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:33:initServer()> Initialize Webserv er
[hyperiond WEBSERVER] <DEBUG> Previous line repeats 1 times
[hyperiond EFFECTENGINE] <DEBUG> <EffectEngine.cpp:183:runEffectScript()> Start the effect: name [Rainbow swirl fast], smoothCfg [2]
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register ne w input 'System/EFFECT' with priority 0 as inactive
[hyperiond HYPERION] <INFO> Initial foreground effect 'Rainbow swirl fast' start ed
[hyperiond EFFECTENGINE] <INFO> Run effect "Warm mood blobs" on channel 254
[hyperiond EFFECTENGINE] <DEBUG> <EffectEngine.cpp:183:runEffectScript()> Start the effect: name [Warm mood blobs], smoothCfg [2]
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register ne w input 'System/EFFECT' with priority 254 as inactive
[hyperiond HYPERION] <INFO> Inital background effect 'Warm mood blobs' started
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register ne w input 'System/GRABBER' with priority 250 as inactive
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentS tate()> Framegrabber: enabled
[hyperiond BOBLIGHT] <DEBUG> <BoblightServer.cpp:28:BoblightServer()> Instance c reated
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentS tate()> LED device: enabled
[hyperiond HYPERION] <INFO> Hyperion instance 'First LED Hardware instance' has been started
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:91:handleSettingsUpdate()> Apply We bserver settings
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:109:handleSettingsUpdate()> Set doc ument root to: :/webconfig
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:91:handleSettingsUpdate()> Apply We bserver settings
[hyperiond WEBSERVER] <INFO> Started on port 8090 name 'Hyperion Webserver'
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:109:handleSettingsUpdate()> Set doc ument root to: :/webconfig
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:175:handleSettingsUpdate()> Setup S SL certificate
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:191:handleSettingsUpdate()> Setup p rivate SSL key
[hyperiond WEBSERVER] <INFO> Started on port 8092 name 'Hyperion Webserver'
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:198:setInput()> Priority 254 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visibl e priority to 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:238:setInputImage()> Priority 0 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:298:setCurrentTime()> Timeout cl ear for priority 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visibl e priority to 254
[hyperiond WEBSOCKET] <DEBUG> <WebSocketClient.cpp:30:WebSocketClient()> New connection from ::ffff:10.0.0.15
[hyperiond WEBSOCKET] <DEBUG> <JsonAPI.cpp:102:handleInstanceSwitch()> Client '::ffff:10.0.0.15' switch to Hyperion instance 0
[hyperiond WEBSOCKET] <DEBUG> <WebSocketClient.cpp:204:sendClose()> send close: 1000Nach dem hyperiond -d komm ich wieder auf die weboberfläche.
LG
-
Nach nem manuellen Start komme ich wieder aufs Web interface! Danke dir!
Wie mach ich es am besten, dass Hyperion.ng wieder automatisch gestartet wird?
LG
-
Hi,
gerade installiert und raspbi neu gestartet. Komme damit noch immer nicht aufs web interface.pi@raspberrypi:~ $ netstat -tanp
(Es konnten nicht alle Prozesse identifiziert werden; Informationen über
nicht-eigene Processe werden nicht angezeigt; Root kann sie anzeigen.)
Aktive Internetverbindungen (Server und stehende Verbindungen)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:8088 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN -
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN -
tcp 0 0 127.0.0.1:59498 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59512 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59434 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59460 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:49010 104.16.26.35:443 TIME_WAIT -
tcp 0 0 127.0.0.1:59520 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59428 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59240 127.0.0.1:42405 VERBUNDEN -
tcp 0 0 127.0.0.1:59406 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59402 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59416 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:8088 10.0.0.10:45426 VERBUNDEN -
tcp 0 0 127.0.0.1:59392 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59444 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59486 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59424 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59494 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59432 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:58422 35.158.19.84:443 VERBUNDEN -
tcp 0 0 127.0.0.1:59450 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59456 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59504 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59420 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:45426 10.0.0.10:8088 VERBUNDEN -
tcp 0 0 127.0.0.1:59462 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59400 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59436 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59522 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59472 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59466 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:49014 104.16.26.35:443 TIME_WAIT -
tcp 0 0 127.0.0.1:59376 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59476 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59478 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59496 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59430 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59518 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59508 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:80 10.0.0.10:59374 VERBUNDEN -
tcp 0 0 127.0.0.1:59490 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59488 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:59374 10.0.0.10:80 VERBUNDEN -
tcp 0 0 127.0.0.1:59412 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59422 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59470 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59394 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:34608 104.16.27.35:443 TIME_WAIT -
tcp 0 2672 10.0.0.10:22 10.0.0.15:50792 VERBUNDEN -
tcp 0 0 127.0.0.1:59482 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59484 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:54812 172.217.16.116:80 VERBUNDEN -
tcp 0 0 127.0.0.1:59446 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59474 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:34604 104.16.27.35:443 TIME_WAIT -
tcp 0 0 127.0.0.1:42332 127.0.0.1:45165 TIME_WAIT -
tcp 0 0 127.0.0.1:59390 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59506 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59414 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:49006 104.16.26.35:443 TIME_WAIT -
tcp 0 0 127.0.0.1:59426 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59396 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59448 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59524 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59404 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59442 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59502 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59464 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59398 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59410 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59492 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59452 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59418 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:34600 104.16.27.35:443 TIME_WAIT -
tcp 0 0 127.0.0.1:59516 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59440 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59438 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59480 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59468 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59500 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59510 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59408 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:59514 127.0.0.1:80 TIME_WAIT -
tcp6 0 0 :::443 :::* LISTEN -
tcp6 0 0 :::6144 :::* LISTEN -
tcp6 0 0 :::42405 :::* LISTEN -
tcp6 0 0 :::8070 :::* LISTEN -
tcp6 0 0 :::8080 :::* LISTEN -
tcp6 0 0 :::51826 :::* LISTEN -
tcp6 0 0 :::22 :::* LISTEN -
tcp6 0 0 10.0.0.10:8080 10.0.0.15:50776 TIME_WAIT -
tcp6 0 0 10.0.0.10:51826 10.0.0.6:62659 VERBUNDEN -
tcp6 0 0 10.0.0.10:8080 10.0.0.15:50777 VERBUNDEN -
tcp6 0 0 10.0.0.10:8070 10.0.0.15:50761 VERBUNDEN -
tcp6 0 0 127.0.0.1:42405 127.0.0.1:59240 VERBUNDEN -
tcp6 0 0 10.0.0.10:8080 10.0.0.15:50778 TIME_WAIT -
tcp6 0 0 10.0.0.10:8080 10.0.0.15:50775 TIME_WAIT -pi@raspberrypi:~ $ hyperiond -d
[hyperiond MAIN] <INFO> Set user data path to '/home/pi/.hyperion'
[hyperiond DAEMON] <DEBUG> <PythonInit.cpp:45:pythonInit()> Initializing Python interpreter
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:108:SettingsManager()> Settings database initialized
[hyperiond EFFECTFILES] <INFO> 39 effects loaded from directory :/effects/
[hyperiond EFFECTFILES] <INFO> 22 effect schemas loaded from directory :/effects/schema/
[hyperiond EFFECTFILES] <INFO> 0 effects loaded from directory /home/pi/.hyperion/custom-effects
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:108:SettingsManager()> Settings database initialized
[hyperiond BLACKBORDER] <DEBUG> <BlackBorderProcessor.cpp:65:handleSettingsUpdate()> Set mode to: default
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentState()> Blackborder detector: enabled
[hyperiond DAEMON] <INFO> set screen capture device to 'dispmanx'
[hyperiond DISPMANXGRABBER] <DEBUG> <Grabber.cpp:34:setVideoMode()> Set videomode to 0
[hyperiond DISPMANXGRABBER] <INFO> Display opened with resolution: 1920x1080
[hyperiond DISPMANXGRABBER] <DEBUG> <Grabber.cpp:83:setWidthHeight()> Set new width: 80, height: 45 for capture
[hyperiond DAEMON] <INFO> DISPMANX frame grabber created
[hyperiond V4L2:auto] <DEBUG> <Grabber.cpp:34:setVideoMode()> Set videomode to 0
[hyperiond V4L2:auto] <INFO> Signal threshold set to: {12, 12, 12}
[hyperiond V4L2:auto] <INFO> Signal detection is now disabled
[hyperiond V4L2:auto] <INFO> Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
[hyperiond DAEMON] <DEBUG> <hyperiond.cpp:484:handleSettingsUpdate()> V4L2 grabber created
[hyperiond LEDDEVICE] <INFO> LedDevice 'apa102' found.
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:55:eek:pen()> _baudRate_Hz [1000000], _latchTime_ms [1]
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:56:eek:pen()> _spiDataInvert [0], _spiMode [0]
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentState()> Smoothing: enabled
[hyperiond FLATBUFCONNECTION] <INFO> Connecting to Hyperion: 127.0.0.1:19401
[hyperiond JSONSERVER] <DEBUG> <JsonServer.cpp:27:JsonServer()> Created instance
[hyperiond EFFECTENGINE] <INFO> Run effect "Rainbow swirl fast" on channel 0
[hyperiond JSONSERVER] <INFO> Started on port 19444
[hyperiond FLATBUFSERVER] <INFO> Started on port 19400
[hyperiond PROTOSERVER] <INFO> Started on port 19445
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:33:initServer()> Initialize Webserver
[hyperiond WEBSERVER] <DEBUG> Previous line repeats 1 times
[hyperiond EFFECTENGINE] <DEBUG> <EffectEngine.cpp:183:runEffectScript()> Start the effect: name [Rainbow swirl fast], smoothCfg [2]
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register new input 'System/EFFECT' with priority 0 as inactive
[hyperiond HYPERION] <INFO> Initial foreground effect 'Rainbow swirl fast' started
[hyperiond EFFECTENGINE] <INFO> Run effect "Warm mood blobs" on channel 254
[hyperiond EFFECTENGINE] <DEBUG> <EffectEngine.cpp:183:runEffectScript()> Start the effect: name [Warm mood blobs], smoothCfg [2]
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register new input 'System/EFFECT' with priority 254 as inactive
[hyperiond HYPERION] <INFO> Inital background effect 'Warm mood blobs' started
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register new input 'System/GRABBER' with priority 250 as inactive
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentState()> Framegrabber: enabled
[hyperiond BOBLIGHT] <DEBUG> <BoblightServer.cpp:28:BoblightServer()> Instance created
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentState()> LED device: enabled
[hyperiond Dispmanx] <DEBUG> <GrabberWrapper.cpp:49:start()> Grabber start()
[hyperiond HYPERION] <INFO> Hyperion instance 'First LED Hardware instance' has been started
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:91:handleSettingsUpdate()> Apply Webserver settings
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:91:handleSettingsUpdate()> Apply Webserver settings
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:109:handleSettingsUpdate()> Set document root to: :/webconfig
[hyperiond WEBSERVER] <DEBUG> Previous line repeats 1 times
[hyperiond WEBSERVER] <INFO> Started on port 8090 name 'Hyperion Webserver'
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:175:handleSettingsUpdate()> Setup SSL certificate
[hyperiond WEBSERVER] <DEBUG> <WebServer.cpp:191:handleSettingsUpdate()> Setup private SSL key
[hyperiond WEBSERVER] <INFO> Started on port 8092 name 'Hyperion Webserver'
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:238:setInputImage()> Priority 250 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visible priority to 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:238:setInputImage()> Priority 0 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:198:setInput()> Priority 254 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:298:setCurrentTime()> Timeout clear for priority 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visible priority to 250
^C[hyperiond DAEMON] <DEBUG> <hyperiond.cpp:167:freeObjects()> Cleaning up Hyperion before quit.
[hyperiond FLATBUFSERVER] <INFO> Stopped
[hyperiond PROTOSERVER] <INFO> Stopped
[hyperiond WEBSERVER] <INFO> Stopped Hyperion Webserver
[hyperiond WEBSERVER] <INFO> Previous line repeats 1 times
[hyperiond HYPERION] <INFO> Hyperion instance 'First LED Hardware instance' has been stopped
[hyperiond LedDeviceWrapper] <INFO> LedDevice 'apa102' closed
[hyperiond Dispmanx] <DEBUG> <GrabberWrapper.cpp:57:stop()> Grabber stop()
[hyperiond Dispmanx] <DEBUG> <GrabberWrapper.cpp:43:~GrabberWrapper()> Close grabber: Dispmanx
[hyperiond V4L2:auto] <DEBUG> <GrabberWrapper.cpp:57:stop()> Grabber stop()
[hyperiond V4L2:auto] <DEBUG> <GrabberWrapper.cpp:43:~GrabberWrapper()> Close grabber: V4L2:auto
[hyperiond MAIN] <INFO> Application closed with code 0
[hyperiond DAEMON] <DEBUG> <PythonInit.cpp:58:~PythonInit()> Cleaning up Python interpreterEDIT: gerade gesehen, dass du deinen Post abgeändert hast... sobald du mir ne neue Version schickst kann ich diese gerne testen...
-
Ok danke! Zumindest wiss ma jetzt schon wodurch es zustande kommt.
LG
-
Hi,
danke für deine Bemühungen. Anbei die Ausgabe von hyperiond -dhyperiond -d
[hyperiond MAIN] <INFO> Set user data path to '/home/pi/.hyperion'
[hyperiond DAEMON] <DEBUG> <PythonInit.cpp:45:PythonInit()> Initializing Python interpreter
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:108:SettingsManager()> Settings database initialized
[hyperiond EFFECTFILES] <INFO> 39 effects loaded from directory :/effects/
[hyperiond EFFECTFILES] <INFO> 22 effect schemas loaded from directory :/effects/schema/
[hyperiond EFFECTFILES] <INFO> 0 effects loaded from directory /home/pi/.hyperion/custom-effects
[hyperiond SettingsManager] <DEBUG> <SettingsManager.cpp:108:SettingsManager()> Settings database initialized
[hyperiond BLACKBORDER] <DEBUG> <BlackBorderProcessor.cpp:65:handleSettingsUpdate()> Set mode to: default
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentState()> Blackborder detector: enabled
[hyperiond DAEMON] <INFO> set screen capture device to 'dispmanx'
[hyperiond DISPMANXGRABBER] <DEBUG> <Grabber.cpp:34:setVideoMode()> Set videomode to 0
[hyperiond DISPMANXGRABBER] <INFO> Display opened with resolution: 1920x1080
[hyperiond DISPMANXGRABBER] <DEBUG> <Grabber.cpp:83:setWidthHeight()> Set new width: 80, height: 45 for capture
[hyperiond DAEMON] <INFO> DISPMANX frame grabber created
[hyperiond V4L2:auto] <DEBUG> <Grabber.cpp:34:setVideoMode()> Set videomode to 0
[hyperiond LEDDEVICE] <INFO> LedDevice 'apa102' found.
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:55:open()> _baudRate_Hz [1000000], _latchTime_ms [1]
[hyperiond LEDDEVICE] <DEBUG> <ProviderSpi.cpp:56:open()> _spiDataInvert [0], _spiMode [0]
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentState()> Smoothing: enabled
[hyperiond FLATBUFCONNECTION] <INFO> Connecting to Hyperion: 127.0.0.1:19401
[hyperiond EFFECTENGINE] <INFO> Run effect "Rainbow swirl fast" on channel 0
[hyperiond EFFECTENGINE] <DEBUG> <EffectEngine.cpp:183:runEffectScript()> Start the effect: name [Rainbow swirl fast], smoothCfg [2]
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register new input 'System/EFFECT' with priority 0 as inacti ve
[hyperiond HYPERION] <INFO> Initial foreground effect 'Rainbow swirl fast' started
[hyperiond EFFECTENGINE] <INFO> Run effect "Warm mood blobs" on channel 254
[hyperiond EFFECTENGINE] <DEBUG> <EffectEngine.cpp:183:runEffectScript()> Start the effect: name [Warm mood blobs], smoothCfg [2]
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register new input 'System/EFFECT' with priority 254 as inac tive
[hyperiond HYPERION] <INFO> Inital background effect 'Warm mood blobs' started
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:158:registerInput()> Register new input 'System/GRABBER' with priority 250 as ina ctive
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentState()> Framegrabber: enabled
[hyperiond BOBLIGHT] <DEBUG> <BoblightServer.cpp:28:BoblightServer()> Instance created
[hyperiond ComponentRegister] <DEBUG> <ComponentRegister.cpp:36:setNewComponentState()> LED device: enabled
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:238:setInputImage()> Priority 0 is now active
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:333:setCurrentTime()> Set visible priority to 0
[hyperiond HYPERION] <DEBUG> <PriorityMuxer.cpp:198:setInput()> Priority 254 is now active -
Hi,
anbei die ausgabe:Aktive Internetverbindungen (Server und stehende Verbindungen)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:8088 0.0.0.0:* LISTEN 900/deCONZ
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 900/deCONZ
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 567/sshd
tcp 0 0 127.0.0.1:34290 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34354 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34366 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34334 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34288 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34260 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34370 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34266 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34316 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34360 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34254 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34292 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34256 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34248 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34262 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34244 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34344 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34304 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34306 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34276 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:49558 127.0.0.1:43495 VERBUNDEN 8138/homebridge
tcp 0 0 127.0.0.1:34246 127.0.0.1:80 TIME_WAIT -
tcp 0 400 10.0.0.10:22 10.0.0.15:57498 VERBUNDEN 3997/sshd: pi [priv
tcp 0 0 127.0.0.1:34376 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:8088 10.0.0.10:48626 VERBUNDEN 900/deCONZ
tcp 0 0 127.0.0.1:34296 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34298 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34240 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34264 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34368 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34346 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34286 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34342 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34280 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34362 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34332 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34374 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34320 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34352 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34268 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34284 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34358 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34252 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34310 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34314 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34364 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34258 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34300 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34338 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34272 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34348 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34328 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:38930 35.158.19.84:443 VERBUNDEN 8138/homebridge
tcp 0 0 127.0.0.1:34274 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34330 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34282 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34326 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:80 10.0.0.10:33848 VERBUNDEN 900/deCONZ
tcp 0 0 10.0.0.10:33848 10.0.0.10:80 VERBUNDEN 8138/homebridge
tcp 0 0 127.0.0.1:34324 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34242 127.0.0.1:80 TIME_WAIT -
tcp 0 0 10.0.0.10:48626 10.0.0.10:8088 VERBUNDEN 8138/homebridge
tcp 0 0 127.0.0.1:34378 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34312 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34318 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34270 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34278 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34336 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34340 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34302 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34356 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34350 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34322 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34380 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34372 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34250 127.0.0.1:80 TIME_WAIT -
tcp 0 0 127.0.0.1:34294 127.0.0.1:80 TIME_WAIT -
tcp6 0 0 :::443 :::* LISTEN 604/domoticz
tcp6 0 0 :::6144 :::* LISTEN 604/domoticz
tcp6 0 0 :::8070 :::* LISTEN 604/domoticz
tcp6 0 0 :::43495 :::* LISTEN 8138/homebridge
tcp6 0 0 :::8080 :::* LISTEN 8231/homebridge-con
tcp6 0 0 :::51826 :::* LISTEN 8138/homebridge
tcp6 0 0 :::22 :::* LISTEN 567/sshd
tcp6 0 0 127.0.0.1:43495 127.0.0.1:49558 VERBUNDEN 8138/homebridge
tcp6 0 0 10.0.0.10:8070 10.0.0.15:57226 VERBUNDEN 604/domoticz
tcp6 0 0 10.0.0.10:51826 10.0.0.6:61794 VERBUNDEN 8138/homebridge -
Hi,
bin gerade dabei auf apa102 umzusteigen... Zurzeit sind keine LEDs am Raspberry angehängt. Als Betriebssystem verwende ich Raspbian Buster with desktop.LG
-
Perfekt, danke!
Vielleicht hängt es irgendwie mit der Kernel-Version vom Raspbi 4b zusammen? Diese habe ich heute auch upgedated, damit ich die SD-Karte gegen eine SSD ersetzen kann und direkt davon booten kann...
LG
-
Hallo,
sorry dafür. (bin ein LinuxNeuling)
habe es nun mittels sudo dpkg -i Hyperion-2.0.0-alpha.6-Linux-armv7l.deb installiert und danach den raspbi wieder neu gestartet. Leider habe ich noch immer dasselbe Problem --> ip:8090 (bzw. 8091) kann ich mich nicht verbinden... im taskmanager vom rasbi sehe ich anfangs nen hyperiond task, der ca. 30 cpu und >1.7Gb RAM benötigt (steigt stetig an) und nach einer gewissen Zeit verschwindet der Task. wenn ich dann Hyperion erneut ausführe beginnt das spiel von vorne. -
Hi,
habe sudo apt-cache search hyperion eingegeben und das resultat warpi@raspberrypi:~ $ sudo apt-cache search hyperion
charybdis - fast, scalable irc server
ttf-aenigma - 465 free TrueType fonts by Brian KentMach ich da was falsch?
Habe es nun mittels
sudo make uninstall
deinstalliert, dann mittels
wget -qO- https://raw.githubusercontent.….ng/master/bin/compile.sh | sh
erneut installiert und dann den raspbi neu gestartet. Komme aber noch immer nicht aufs Webinterface. Wenn ich nun mit 'top' den Prozess suche finde ich nun kein hyperion mehr in der liste...
-
Hi,
habe heute auf die alpha 6 version upgedated und seitdem habe ich keinen zugriff mehr auf die weboberfläche.Für die installation bin ich folgendermaßen vorgegangen:
git clone --recursive https://github.com/hyperion-project/hyperion.ng.git hyperion
cd hyperion
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release ..
make -j $(nproc)
sudo make install/stripdanach habe ich die ip:8090 aufgerufen, jedoch passiert dann nix mehr. Wie kann ich einen log erzeugen, um auf das problem zu kommen?
LG
PS:
Raspberry Pi 4 Modell B 4GB SDRAM
Operating System: Raspian Buster with Desktop
Kernel: 5.4.42-v7l+
Node.js: v12.17.0
NPN: v6.14.5EDIT: wenn ich mittels dem befehl 'top' den arbeitsspeicher anschau benötigt hyperion 1.5GB Ram und 71% CPU...
-
Regarding 1: There is (as far as I know) an app for this, but it do not work with encrypted content (netflix, prime...) so it's not that useful
Regarding 2: Yes, this is possible.
-
u20p17: what's the problem at the moment to include a DV-SDR conversion? Isn't it a standartized process?
are you also working on a hdmi2.1 version for Diva? (so4k@120fps)HDFury: DV source encrypt using DV String from DV display and only DV display that have same string can decode it, so you need to have DV license to encrypt or decrypt
no license = no documentation = no how to
There won't be any HDMI2.1 device this year due to coronavirus, everything has been delayedu20p17: ok, and to licence the diva would be much to expensive I think,or?
HDFury: they are not giving any license to small companies like us, also they are NOT giving any license if you are not a SOURCE or a SINK (display)
so it needs hacking effort mainly or leak in documentation -
Hi,
ich bin auch gerade dabei mich zum Thema Ambilight mit raspbi einzulesen und weiß mittlerweile, dass SDR Inhalte problemlos funktionieren, bei HDR und DV schauts da schon etwas schwieriger aus:HDR: Entweder man kauft sich ein teueres HDFury Product (z.B.: Diva) oder man erstellt eine zweite Hyperion Config und tauscht diese je nach Quelle (SDR/HDR) aus.
DV: Um LLDV nutzen zu können muss man ebenfalls wieder auf ein HDFury Product zurückgreifen. DV geht aber zuzeit selbst dort nicht. (Oder gibt es für DV auch eine Lösung?)Wieso ist es so schwer, einen HDR bzw. DV Inhalt in SDR zu konvertieren? Sind die Algorithmen nicht standartisiert? Oder worin liegen hier die großen Schwierigkeiten? (Sorry, kenn mich dafür noch zuwenig aus mit der Thematik!)
EDIT: Habe nun mit dem HDFURY support ein wenig geschrieben und dort habe ich folgendes erfahren:
-
Schau dir mal folgende Anleitungen an:
Externer Inhalt www.youtube.comInhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.
https://github.com/hyperion-pr…ob/master/CompileHowto.mdDort wird eigentlich alles erforderliche sehr genau erklärt. Einzig dass der Service beim start vom raspbi automatisch gestartet wird fehlt.Hierfür folgenden thread öffnen und beitrag #52 Schritt 4 durchführen:
https://hyperion-project.org/t…o-open-device.4336/page-3
als User musst du statt 'OSMC' 'pi' eintragen.
LG
-
ip adresse vom raspi im interent browser eingeben und dann ':8090' anhängen.
z.b.: 192.168.0.10:8090
LG
-
Hi all,
I am not sure if the forum language must be englisch, or if german would be also ok. But I will write in englisch due to the fact that more people will understand it.I am planning to buy an LG OLED tv 65” and mount it onto the wall. Furthermore, I will buy a Denon AV receiver x3600h which has 8 HDMI in and 3 HDMI out (4k60Hz) ports. To the HDMI in ports I will connect an Apple TV 4k and ps3/4. The HDMI Out 1 will directly connected to the LG OLED tv and the HDMI Out 2 to an HDMI grabber (which would you recommend?). The grabber will be connected via USB3 to my Raspbi 4b 4GB with Raspbian and Hyperion NG. (see attached picture) This should work fine, or did I understand something wrong?
Now, if I am watching TV over the AppleTV I should have Ambilight. If I watch Netflix/Prime/Disney+/… with the AppleTV do I also have Ambilight? Or is there an encryption which the Raspbi isn’t capable of?
I have read that there is a problem with Ambilight in combination with HDR/DolbyVison. Would it somehow be possible that I convert the video signal from the HDMI Out 2 (which goes to the Grabber) to SDR in order to not have the problems even if I am watching HDR/Vison content on the LG TV?
Thank you in advance!
Best regards,
Franz