I am not sure if there is an automatic option for this.
HDMI switch would help you out. In my case for hdmi switch works my onkyo avr, where I can pick the soure of signal.
On RPI usb capture and platform is always on.
Beiträge von Tomasz
-
-
try lsusb on your rpi. will see if card is detected.
-
Will try with detaching the HDMI. What confuses me most is i never had an issue like this before
Thank you for the tip! -
Hello Folks!
Im faceing an issue i can not fix.
I decided to search for an answer wherever I could but with no result, so I decided to ask for help here.
Over a week ago I had power cut in my flat. Since then when all devices switched off after some time I got a rainbow behind my TV
My setup is:
Shield TV -> Onkyo AVR -> hdmi capute card - TV
When all switched off hyperion (the latest version) behaves as should - all gets black (effect background color active) unfortunately after some time, an hour I belive got a rainbow behind my tv.
Onkyo has HDMI passtrough on, so screen saver from shield should send only black colour to the hyperion. Still...after a time rainbow occurs so I switching leds off manualy via hyperion panel.
Any tips, or ideas how to sort it out? TBF I think I have done all in my knowlege to sort it out.
Happy Weekend Guys! -
Just wondering.
My cheap capture card died, so I bought better one:
Unfortunately my RPI3B dosent recognize this card..
Any idea what the cause is?
Card works, checked with VLC on a PC
Regards,
Folks! -
Any news about zigbee? I did try to connect it to hyperion but....fail
-
You need to connect via GPIO18, then use systemctl to send signal to gpio.
-
Greetings Folks!
I was wondering if is possible to install and run hyperion under RetroPie?
Well, it is. Somehow i manage to do that some time ago. Unfortunately can't remember how did I do that?When Hyperion-2.0.0-alpha.9-Linux-armv7l.deb downloaded after dkpg -i I got message about depencies (whatever that is)
Kind reards and have a lovely weekend!
-
Hello Folks,
Please forgive me my lame question, but I think U used all my ideas.
I have my RPi3b+ with hyperion alpha 9 on it. Raspberry i bought only for hyperion. But with time i realised that raspberry could me much more than led controller.
My question is. Is it possible to have retropie/recalbox on same raspberry as hyperion?
I've seen information that recalbox is hyperion ready and i can use json to configure - dont like json.Kind regards,
Ps. Forgive me my broken english.
-
Morning guys,
Sience yesterday my video cap shows me in hyperion (Alpha8) black background straight from raspberry instead of picture generated by hdmi splitter.
I did all checkings, connections are fine.
Where the problem could be? -
Thanks, i did follow Your suggestion. Unfortunately after connection to GPIO my leds give me full blast of white color.
What pin did You use as ground? -
Hi!
Thanks for quick response!
Will try with GPIO10. My only concern is what do I need to type in command line to active GPIO10?
sudo systemctl disable --now hyperiond@pi
sudo systemctl enable --now hyperiond@root ?Kind regards!
-
Good morning Folks!
Sience a few days im struggle with hyperion.
I've check the forum but i couldn't find an answer so..
Lastest version Aplha 8 is installed on my RPI3b+. Leds are controlled by GPIO18I lost controll for brightness of my leds.
Is it possible to fix it? I did try re-install whoe software with no efect.Have a good day people!
-
Bug in Alpha 7. Please use Alpha 6.
Is it possible from somewhere to download hyperbian with Alpha6?
-
Thank You Lord-Grey.
Will try to downgrade to n Alpha6 and will see.What is most interesting to me, that the black colour effect was working fine till yesterday.
Will do more tests.
Really appreciate your help!
-
Which Hyperion version are you using?
If it is hyperion.ng Alpha7, then it is a know issue and has been fixed.Nazdar!
It's Alpha7 but still can't get black colour when idle. -
Hello Guys!
Im in trouble a bit.I did set up a black colour when hyperion dosent receive any signal.
Instead of black (no lights) my leds peresnt full bright rainbow.
Any ideas how to force rpi to produce black colour? -
Did you plugged your grabber straight to pie or do you use an extension lead?
If the other option, then there is a big chance that hyperion will lose connection with grabber -
hi,
Can not help You with first question, but about the HDR as far as i know RP is not compatible with hdr content.
But, I can be wrong so dont take it as fact! -
Right...
I dont see a point to create a new thread
https://www.aliexpress.com/ite…b201602_,searchweb201603_ this is my kit, was working for about 10 days.
I have replaced grabber, i reinstalled hyperion and still dark...Got 222 leds WS2812B, connected to arduino, ardudino to pi 3...nothing. Loosing hope to get it sorted.