well your initial post wasn't perfectly clear on that, sorry. so you can connect to webOS with pihelper app and it reads CPU temp?
good to know
Yes👍🏻
well your initial post wasn't perfectly clear on that, sorry. so you can connect to webOS with pihelper app and it reads CPU temp?
good to know
Yes👍🏻
your PI gets to 70°C in idle?
what PI do you use? what kind of cooling? and what's the room temperature
You haven't read carefully. It's not about the Pi but about the CPU of the TV
It's best to report this on Discord OpenLGTV > picap-hyperion.
Where did you get the temperature from?
I also think 70 degrees without PicCap/hyperion is a lot. Have you checked the CPU load with htop?
regards pclin
I connected to the TV via ssh and checked in the pihelper application
Hello everyone and thank you for this wonderful project! But there is a problem that haunts me! CPU temperature!!! It reaches 99 degrees when hyperion ng is running on webos with piccap. And how are things with the CPU temperature? With hyperion and piccap disabled, I have about 70 degrees. Thanks a lot in advance!
The change from Alpha9 to Alpha11 is unfortunately a bit cumbersome. This has been solved in the meantime with our APT server.
The easiest method is to export your config with the help of the WebUI and write the latest version to the SD card. Then import the config again and you're done.
Understood. Thanks!
I'm using alpha 9
Hello everyone Friends, please help me update Hyperbian to the latest version. Is there a script or a command for this? Or do I need to record the image again? Thank you all in advance!
Hyperion.ng alpha 9
Очень странно... Спроси в общем чате, поддерживает ли он hyperion-remote с LibreElec. Может админы подскажут.
Ну в общем Hyperion-remote не работает... Может быть на LibreELEC он не работает вообще...
А какая версия hyperion?
Не было второй галки, но и с ней ничего не поменялось.. Есть документация по Hyperion-remote на покурить?
-sh: hyperion-remote: not found
Через Putty пробую, тоже самое. Толи ремоута нет, толи имя инстанса не видит. Перезагружал малину и гепирион.
А мои команды останавливают сервис Hyperion - светодиоды остаются гореть. Вторая команда врубает с начальным эффектом Hyperion.
Ну я где то видел здесь на форуме SSH команды выключения и включения hyperion в libreelec. Пока не нашел, но интерфейс команды "Скрипт через SSH" выглядит правдоподобно для этого.
192.168.0.32
Инстанс не помню как называется, дефолтное название с First LED чо то там
UPD: такие нашел. не пробовал.
systemctl stop hyperion.service
systemctl start hyperion.service
Можешь и их попробовать. Можешь мою. Только имя инстанса измени.
https://www.icloud.com/shortcu…1afac4bd489130e8526185f2c
Через стандартное приложение "Команды" чтоли?
Вижу тут через SSH можно отправлять команды...
Или сам уже разобрался? Если нет, скинь ip своей малины и название инстанса я сделаю тебе.
Через стандартное приложение "Команды" чтоли?
Да! И это весьма удобно. Сможешь попросить сири выключить твой hyperion
Лента у мена запитана от отдельного БП, сигналы идут от Малины. То есть ТВ вообще не знает о малине, просто по HDMI сигнал принимает. Не совсем понял про сплиттер. Запитать то от него ленту не получится... Не пользовался данным девайсом.
ios девайс есть. Можно поподробней про hyperion-remote?
Конечно. Чуть позже сделаю тебе команду выключения.
Спасибо за видео!
Пару лет пользовался Hyperion Rpi3 + LibreELEC + Kodi. Теперь Обновился на Hyperion.NG, хоть и не с первого раза получилось. Старую версию нужно удалить, а потом ставить Hyperion.ng.
Теперь подсветка работает и в меню Kodi, в том числе, когда выключен ТВ.
Через HyperCon можно было настроить отключение подсветки в меню и тем самым избавить себя от необходимости отключать Малину. Есть ли в Hyperion.ng такая возможность?
С выключением телевизора у меня всегда выключается и подсветка. Проблем нет. Подключи питание на сплиттер через usb телевизора. При выключении ТВ на usb разъёмах пропадает питание и сплиттер отключается. Соответственно и подсветка тоже. Кроме того можно отключать hyperion при помощи команд hyperion-remote. Особенно удобно если есть ios устройство. В приложении Команды можно настроить управление подсветкой и эффектами.
None can help me? Alpha9 didn't solved my issue....
My friend! Connect the power to the splitter from the usb TV. When you turn off the TV, all the LEDs will be black.
Since there is such a conversation, I join in! Hats off to the developers of this project! You are great people!
P.S. From Russia with love!
Hello everybody! Very interested in this question! Can I get a stream from a grabber to add live viewing as a usb camera to homebridge?
@Awawa , hi! Installed your image. Everything is fine, but now running hyperion-remote commands via apple shortcuts doesn't work. Maybe the problem is that the controller is not identified as a raspberry pi? If I change the memory card to the one on which the original alpha 8 Hyperion-remote commands work again.