On which pin on Raspberry B+ you have to wire this LEDs ?
Thank you for your help !
On which pin on Raspberry B+ you have to wire this LEDs ?
Thank you for your help !
One question more I have this power supply connected on both side of LED strip 5m (60 per m) - 272leds :
https://www.aliexpress.com/ite…b201602_,searchweb201603_
Is it enough ?
Do I need Ambibox Dreamcolor for this setup ? Maybe I have to connect strip directly to RPi, but I don't know how or If this would work?
No, it is RGB with neutral white . Every second light is shinnig in color.
Now, my setup has new lights, and I don’t know how to make them work:
Led SK6812 RGBneutral white
Raspberry B+
Ambibox dreamcolor
Grabber V4L2
all on Hyperbian.
Last 60leds dont work, others shine white mixed with color, lights are moving with picuture, but all seems white. When I try to get only one color with color wheel on my phone, they are changing to color - again white mixed with color.
On settings I use adalight (115200 baudrate), If i change anything lights go off.
Thank you for your help!
I have SK6812 led with rgb neutral white, Ambibox Dream color controller (usb) with Raspberry B+. I can’t get Leds working as they should. I have 272 led. First off all they don’t light all of them, Approx. 65 last lights are not working at all, all others are working, but color is not ok. Every other light is shining white, so it seems like everything is white.
On settings I use Adalight on 115200 baudrate. Can you help me, what shoud I do to get this working?
What kind of controler you have? Because I have this lights on USB Dreamcolor and setting Adalight and is not working for me, I get mostly only white color. I think because is on USB on Raspberry. I will buy diffrent controler to work on SPI, but I dont know which one?
I have lights WS2812b (5M) + RP B+ and grabber V4L2 on Openelec 8.0.4. Everything was working ok for few months. Now when I turn on ambilight lights are working for sam time ok (different time, some time 5 minutes - sometime hour), and then they freeze on the left side of the TV (from approx. 185 led till the end of strip 271. ) After that left side won't work anymore, sometime freezzes on last color sometimes on black. The right side working ok. If I turn of light and turno back again it is not helping. I must wait with turned off for approx. 10min, then I turn them again and is working for some time and again freezes. It is driving me crazy.
Can you please help me what is wrong with my setup? Thank you!
EDIT:
I bought new led strip. Now I have sk6812 with neutral white, but now is not working last 60 lights and on others color is not ok. Almost all the lights are shinning only white.
Led SK6812 RGBneutral white
Raspberry B+
Ambibox dreamcolor
Grabber V4L2
all on Hyperbian.
Last 60leds dont work, others shine white mixed with color, lights are moving with picuture, but all seems white. When I try to get only one color with color wheel on my phone, they are changing to color - again white mixed with color.
What I did wrong?