I am trying to also get this. The brightness is seldon 12-20% and the ambilight effect is some poor.
Beiträge von iam960
-
-
ping -a gives an error:
Zitatping -a 192.168.31.115
ping: invalid option -- 'a'
BusyBox v1.30.1 (Debian 1:1.30.1-4) multi-call binary.Usage: ping [OPTIONS] HOST
Send ICMP ECHO_REQUEST packets to network hosts
-4,-6 Force IP or IPv6 name resolution
-c CNT Send only CNT pings
-s SIZE Send SIZE data bytes in packets (default 56)
-i SECS Interval
-A Ping as soon as reply is recevied
-t TTL Set TTL
-I IFACE/IP Source interface or IP address
-W SEC Seconds to wait for the first response (default 10)
(after all -c CNT packets are sent)
-w SEC Seconds until ping exits (default:infinite)
(can exit earlier with -c CNT)
-q Quiet, only display output at start
and when finished
-p HEXBYTE Pattern to use for payloadAnd arp -a gives only the IP and the MAC address of the device.
-
I am trying to run again the wizard but it keep in this window:
This previously happened sometimes, but now I have tried multiples times and it doesn't pass this window.
Just now, I have removed the LAN permission for the bulb from the xiaomi app, and I have got this:
It is strange because the name that is automatically assigned to the strip (the only one bulb with LAN permission just now) is 'conf_leds_layout_cl_entire'. But yesterday, in my router, it has the name 'yeelink-light-strip2_miap7fe2'.
I will repeat the wizard later until the both bulbs were found.
This is the ping output for the two bulbs:
PING 192.168.31.115 (192.168.31.115): 56 data bytes
64 bytes from 192.168.31.115: seq=0 ttl=255 time=400.514 ms
64 bytes from 192.168.31.115: seq=1 ttl=255 time=7.545 ms
64 bytes from 192.168.31.115: seq=2 ttl=255 time=4.487 ms
^C
--- 192.168.31.115 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 4.487/137.515/400.514 ms$ ping 192.168.31.177
PING 192.168.31.177 (192.168.31.177): 56 data bytes
64 bytes from 192.168.31.177: seq=0 ttl=255 time=1.719 ms
64 bytes from 192.168.31.177: seq=1 ttl=255 time=1.651 ms
64 bytes from 192.168.31.177: seq=2 ttl=255 time=1.657 ms
64 bytes from 192.168.31.177: seq=3 ttl=255 time=1.424 ms
64 bytes from 192.168.31.177: seq=4 ttl=255 time=1.464 ms
64 bytes from 192.168.31.177: seq=5 ttl=255 time=7.060 ms
^C
--- 192.168.31.177 ping statistics ---
6 packets transmitted, 6 packets received, 0% packet loss
round-trip min/avg/max = 1.424/2.495/7.060 ms -
Thanks for your support. I have activated the debug mode. When I enter in the Yeelight Wizard, this is the appearing window:
The Identify button don't produce any effect, and both light and ambilight don't work. When I put the bulb IP in 'Network devicename', it does work without problem. Though the majority of movies are continously blinking (losing the HDMI source). Then, I change this parameter in 'Platform Capture':
Height: 64
Width: 64
Capture frequency: 30And it work with all the movies.
I paste the debug output:
2020-11-03T13:22:43.529 hyperiond WEBSOCKET : <DEBUG> JsonAPI.cpp:1386:handleLedDeviceCommand() | message: [{"command":"leddevice","ledDeviceType":"yeelight","subcommand":"discover","tan":72
4}]
2020-11-03T13:22:43.530 hyperiond SSDPDISCOVER : <DEBUG> SSDPDiscover.cpp:206:discoverServices() | Search for Service [wifi_bulb], address [229.255.255.250], port [1982]
2020-11-03T13:22:43.602 hyperiond SSDPDISCOVER : <DEBUG> SSDPDiscover.cpp:252:discoverServices() | Found target [wifi_bulb], plus record [yeelight://192.XXX.XX.XXX:55443] matches [LOCATION:yeel
ight(.*)]
2020-11-03T13:22:44.105 hyperiond SSDPDISCOVER : <DEBUG> SSDPDiscover.cpp:252:discoverServices() | Previous line repeats 1 times
2020-11-03T13:22:44.105 hyperiond SSDPDISCOVER : <DEBUG> SSDPDiscover.cpp:294:discoverServices() | [1] service record(s) found
2020-11-03T13:22:49.111 hyperiond LEDDEVICE : <DEBUG> LedDeviceYeelight.cpp:1370:discover() | devicesDiscovered: [{"devices":[{"cache-control":"max-age=3600","domain":"168.XX.XXX","hostname"
:"192","id":"yeelight://192.XXX.XX.XXX:55443","ip":"192.XXX.XX.XXX","location":"yeelight://192.XXX.XX.XXX:55443","other":{"bright":"34","color_mode":"1","ct":"4000","date":"","ext":"","fw_ver":
"73","hue":"115","id":"0x00000000080c10b4","model":"stripe","name":"","power":"off","rgb":"3692597","sat":"39","support":"get_prop set_default set_power toggle set_bright start_cf stop_cf set_s
cene cron_add cron_get cron_del set_ct_abx set_rgb set_hsv set_adjust adjust_bright adjust_ct adjust_color set_music set_name"},"port":55443,"server":"POSIX UPnP/1.0 YGLC/1","st":"","usn":""}],
"ledDeviceType":"yeelight"}]
2020-11-03T13:22:49.111 hyperiond WEBSOCKET : <DEBUG> JsonAPI.cpp:1409:handleLedDeviceCommand() | response: [{"devices":[{"cache-control":"max-age=3600","domain":"168.XX.XXX","hostname":"192
","id":"yeelight://192.XXX.XX.XXX:55443","ip":"192.XXX.XX.XXX","location":"yeelight://192.XXX.XX.XXX:55443","other":{"bright":"34","color_mode":"1","ct":"4000","date":"","ext":"","fw_ver":"73",
"hue":"115","id":"0x00000000080c10b4","model":"stripe","name":"","power":"off","rgb":"3692597","sat":"39","support":"get_prop set_default set_power toggle set_bright start_cf stop_cf set_scene
cron_add cron_get cron_del set_ct_abx set_rgb set_hsv set_adjust adjust_bright adjust_ct adjust_color set_music set_name"},"port":55443,"server":"POSIX UPnP/1.0 YGLC/1","st":"","usn":""}],"ledD
eviceType":"yeelight"}]
2020-11-03T13:22:56.356 hyperiond WEBSOCKET : <DEBUG> JsonAPI.cpp:1386:handleLedDeviceCommand() | message: [{"command":"leddevice","ledDeviceType":"yeelight","params":{"hostname":"192","port
":55443},"subcommand":"identify","tan":1}]
2020-11-03T13:22:56.357 hyperiond LEDDEVICE : <DEBUG> LedDeviceYeelight.cpp:1402:identify() | params: [{"hostname":"192","port":55443}]
2020-11-03T13:22:56.357 hyperiond LEDDEVICE : <DEBUG> LedDeviceYeelight.cpp:1406:identify() | apiHost [192], apiPort [55443]
2020-11-03T13:22:56.358 hyperiond LEDDEVICE : <ERROR> Yeelight device '192' signals error: 'Connection refused'Thanks again!
Iam.