2021-06-01T17:27:29.255Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:93:close()) Flush was successful
 2021-06-01T17:27:29.255Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:95:close()) Close UART: ttyACM0
 2021-06-01T17:27:29.861Z [hyperiond LEDDEVICE] (INFO)  Stopped LedDevice 'adalight'
 2021-06-01T17:27:29.862Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'adalight'.
 2021-06-01T17:27:29.864Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":200,"delayAfterConnect":0,"hardwareLedCount":200,"latchTime":30,"lightberry_apa102_mode":false,"output":"ttyACM0","rate":115200,"rewriteTime":0,"type":"adalight"}]
 2021-06-01T17:27:29.865Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 30ms
 2021-06-01T17:27:29.865Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
 2021-06-01T17:27:29.866Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType   : adalight
 2021-06-01T17:27:29.866Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount     : 200
 2021-06-01T17:27:29.867Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder   : rgb
 2021-06-01T17:27:29.868Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime  : 0
 2021-06-01T17:27:29.868Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime    : 30
 2021-06-01T17:27:29.869Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName   : ttyACM0
 2021-06-01T17:27:29.870Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice   : 0
 2021-06-01T17:27:29.871Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz  : 115200
 2021-06-01T17:27:29.872Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 0
 2021-06-01T17:27:29.874Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:59:init()) Adalight header for 200 leds: Ada 0x00 0xc7 0x92
 2021-06-01T17:27:29.874Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyACM0
 2021-06-01T17:27:29.874Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyACM0, Baud rate [115200]bps
 2021-06-01T17:27:29.884Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
 2021-06-01T17:27:29.941Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName:          ttyACM0
 2021-06-01T17:27:29.942Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation:    /dev/ttyACM0
 2021-06-01T17:27:29.942Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:       0043
 2021-06-01T17:27:29.942Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:      Arduino  www.arduino.cc 
 2021-06-01T17:27:29.942Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x43
 2021-06-01T17:27:29.943Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier:  0x2341
 2021-06-01T17:27:29.943Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:      75833353035351E08142
 2021-06-01T17:27:29.946Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
 2021-06-01T17:27:44.968Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:93:close()) Flush was successful
 2021-06-01T17:27:44.969Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:95:close()) Close UART: ttyACM0
 2021-06-01T17:27:45.576Z [hyperiond LEDDEVICE] (INFO)  Stopped LedDevice 'adalight'
 2021-06-01T17:27:45.595Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'adalight'.
 2021-06-01T17:27:45.596Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rbg","currentLedCount":200,"delayAfterConnect":0,"hardwareLedCount":200,"latchTime":30,"lightberry_apa102_mode":false,"output":"ttyACM0","rate":115200,"rewriteTime":0,"type":"adalight"}]
 2021-06-01T17:27:45.596Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 30ms
 2021-06-01T17:27:45.597Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
 2021-06-01T17:27:45.597Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType   : adalight
 2021-06-01T17:27:45.598Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount     : 200
 2021-06-01T17:27:45.598Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder   : rbg
 2021-06-01T17:27:45.599Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime  : 0
 2021-06-01T17:27:45.599Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime    : 30
 2021-06-01T17:27:45.600Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName   : ttyACM0
 2021-06-01T17:27:45.600Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice   : 0
 2021-06-01T17:27:45.600Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
 2021-06-01T17:27:45.601Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz  : 115200
 2021-06-01T17:27:45.601Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 0
 2021-06-01T17:27:45.602Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:59:init()) Adalight header for 200 leds: Ada 0x00 0xc7 0x92
 2021-06-01T17:27:45.602Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyACM0
 2021-06-01T17:27:45.602Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyACM0, Baud rate [115200]bps
 2021-06-01T17:27:45.642Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName:          ttyACM0
 2021-06-01T17:27:45.643Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation:    /dev/ttyACM0
 2021-06-01T17:27:45.643Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:       0043
 2021-06-01T17:27:45.644Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:      Arduino  www.arduino.cc 
 2021-06-01T17:27:45.644Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x43
 2021-06-01T17:27:45.645Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier:  0x2341
 2021-06-01T17:27:45.645Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:      75833353035351E08142
 2021-06-01T17:27:45.648Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
 2021-06-01T17:28:00.441Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:93:close()) Flush was successful
 2021-06-01T17:28:00.441Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:95:close()) Close UART: ttyACM0
 2021-06-01T17:28:01.055Z [hyperiond LEDDEVICE] (INFO)  Stopped LedDevice 'adalight'
 2021-06-01T17:28:01.056Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'adalight'.
 2021-06-01T17:28:01.056Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"brg","currentLedCount":200,"delayAfterConnect":0,"hardwareLedCount":200,"latchTime":30,"lightberry_apa102_mode":false,"output":"ttyACM0","rate":115200,"rewriteTime":0,"type":"adalight"}]
 2021-06-01T17:28:01.056Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 30ms
 2021-06-01T17:28:01.056Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
 2021-06-01T17:28:01.057Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType   : adalight
 2021-06-01T17:28:01.057Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount     : 200
 2021-06-01T17:28:01.057Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder   : brg
 2021-06-01T17:28:01.057Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime  : 0
 2021-06-01T17:28:01.057Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime    : 30
 2021-06-01T17:28:01.058Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName   : ttyACM0
 2021-06-01T17:28:01.058Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice   : 0
 2021-06-01T17:28:01.058Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz  : 115200
 2021-06-01T17:28:01.058Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 0
 2021-06-01T17:28:01.059Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:59:init()) Adalight header for 200 leds: Ada 0x00 0xc7 0x92
 2021-06-01T17:28:01.059Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyACM0
 2021-06-01T17:28:01.059Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyACM0, Baud rate [115200]bps
 2021-06-01T17:28:01.089Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
 2021-06-01T17:28:01.107Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName:          ttyACM0
 2021-06-01T17:28:01.108Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation:    /dev/ttyACM0
 2021-06-01T17:28:01.108Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:       0043
 2021-06-01T17:28:01.108Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:      Arduino  www.arduino.cc 
 2021-06-01T17:28:01.108Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x43
 2021-06-01T17:28:01.108Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier:  0x2341
 2021-06-01T17:28:01.108Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:      75833353035351E08142
 2021-06-01T17:28:01.111Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
 2021-06-01T17:28:11.125Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:93:close()) Flush was successful
 2021-06-01T17:28:11.125Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:95:close()) Close UART: ttyACM0
 2021-06-01T17:28:11.740Z [hyperiond LEDDEVICE] (INFO)  Stopped LedDevice 'adalight'
 2021-06-01T17:28:11.741Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'adalight'.
 2021-06-01T17:28:11.742Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"gbr","currentLedCount":200,"delayAfterConnect":0,"hardwareLedCount":200,"latchTime":30,"lightberry_apa102_mode":false,"output":"ttyACM0","rate":115200,"rewriteTime":0,"type":"adalight"}]
 2021-06-01T17:28:11.742Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 30ms
 2021-06-01T17:28:11.743Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
 2021-06-01T17:28:11.743Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType   : adalight
 2021-06-01T17:28:11.744Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount     : 200
 2021-06-01T17:28:11.744Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder   : gbr
 2021-06-01T17:28:11.745Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime  : 0
 2021-06-01T17:28:11.745Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime    : 30
 2021-06-01T17:28:11.746Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName   : ttyACM0
 2021-06-01T17:28:11.746Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice   : 0
 2021-06-01T17:28:11.747Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz  : 115200
 2021-06-01T17:28:11.747Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 0
 2021-06-01T17:28:11.747Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:59:init()) Adalight header for 200 leds: Ada 0x00 0xc7 0x92
 2021-06-01T17:28:11.748Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyACM0
 2021-06-01T17:28:11.748Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyACM0, Baud rate [115200]bps
 2021-06-01T17:28:11.764Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
 2021-06-01T17:28:11.798Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName:          ttyACM0
 2021-06-01T17:28:11.798Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation:    /dev/ttyACM0
 2021-06-01T17:28:11.799Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:       0043
 2021-06-01T17:28:11.799Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:      Arduino  www.arduino.cc 
 2021-06-01T17:28:11.799Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x43
 2021-06-01T17:28:11.800Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier:  0x2341
 2021-06-01T17:28:11.800Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:      75833353035351E08142
 2021-06-01T17:28:11.803Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
 2021-06-01T17:28:26.500Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:93:close()) Flush was successful
 2021-06-01T17:28:26.500Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:95:close()) Close UART: ttyACM0
 2021-06-01T17:28:27.113Z [hyperiond LEDDEVICE] (INFO)  Stopped LedDevice 'adalight'
 2021-06-01T17:28:27.114Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'adalight'.
 2021-06-01T17:28:27.116Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"grb","currentLedCount":200,"delayAfterConnect":0,"hardwareLedCount":200,"latchTime":30,"lightberry_apa102_mode":false,"output":"ttyACM0","rate":115200,"rewriteTime":0,"type":"adalight"}]
 2021-06-01T17:28:27.117Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 30ms
 2021-06-01T17:28:27.118Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
 2021-06-01T17:28:27.118Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType   : adalight
 2021-06-01T17:28:27.118Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount     : 200
 2021-06-01T17:28:27.119Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder   : grb
 2021-06-01T17:28:27.119Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime  : 0
 2021-06-01T17:28:27.120Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime    : 30
 2021-06-01T17:28:27.120Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName   : ttyACM0
 2021-06-01T17:28:27.121Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice   : 0
 2021-06-01T17:28:27.121Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz  : 115200
 2021-06-01T17:28:27.122Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 0
 2021-06-01T17:28:27.122Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:59:init()) Adalight header for 200 leds: Ada 0x00 0xc7 0x92
 2021-06-01T17:28:27.123Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyACM0
 2021-06-01T17:28:27.123Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyACM0, Baud rate [115200]bps
 2021-06-01T17:28:27.140Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
 2021-06-01T17:28:27.169Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName:          ttyACM0
 2021-06-01T17:28:27.170Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation:    /dev/ttyACM0
 2021-06-01T17:28:27.170Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:       0043
 2021-06-01T17:28:27.171Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:      Arduino  www.arduino.cc 
 2021-06-01T17:28:27.171Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x43
 2021-06-01T17:28:27.171Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier:  0x2341
 2021-06-01T17:28:27.172Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:      75833353035351E08142
 2021-06-01T17:28:27.174Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
 2021-06-01T17:28:41.236Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:93:close()) Flush was successful
 2021-06-01T17:28:41.236Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:95:close()) Close UART: ttyACM0
 2021-06-01T17:28:41.844Z [hyperiond LEDDEVICE] (INFO)  Stopped LedDevice 'adalight'
 2021-06-01T17:28:41.845Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'adalight'.
 2021-06-01T17:28:41.845Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"bgr","currentLedCount":200,"delayAfterConnect":0,"hardwareLedCount":200,"latchTime":30,"lightberry_apa102_mode":false,"output":"ttyACM0","rate":115200,"rewriteTime":0,"type":"adalight"}]
 2021-06-01T17:28:41.845Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 30ms
 2021-06-01T17:28:41.845Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
 2021-06-01T17:28:41.845Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType   : adalight
 2021-06-01T17:28:41.845Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount     : 200
 2021-06-01T17:28:41.846Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder   : bgr
 2021-06-01T17:28:41.846Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime  : 0
 2021-06-01T17:28:41.846Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime    : 30
 2021-06-01T17:28:41.846Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName   : ttyACM0
 2021-06-01T17:28:41.846Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice   : 0
 2021-06-01T17:28:41.846Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz  : 115200
 2021-06-01T17:28:41.846Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 0
 2021-06-01T17:28:41.846Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:59:init()) Adalight header for 200 leds: Ada 0x00 0xc7 0x92
 2021-06-01T17:28:41.846Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyACM0
 2021-06-01T17:28:41.847Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyACM0, Baud rate [115200]bps
 2021-06-01T17:28:41.876Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
 2021-06-01T17:28:41.908Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName:          ttyACM0
 2021-06-01T17:28:41.908Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation:    /dev/ttyACM0
 2021-06-01T17:28:41.908Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:       0043
 2021-06-01T17:28:41.908Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:      Arduino  www.arduino.cc 
 2021-06-01T17:28:41.908Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x43
 2021-06-01T17:28:41.908Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier:  0x2341
 2021-06-01T17:28:41.908Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:      75833353035351E08142
 2021-06-01T17:28:41.910Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
 2021-06-01T17:29:22.718Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.50.93
 2021-06-01T17:29:22.718Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.50.93' switch to Hyperion instance 0
 2021-06-01T17:29:22.946Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.50.93
 2021-06-01T17:29:22.973Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.50.93
 2021-06-01T17:30:22.291Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 1024, height: 768 for capture
 2021-06-01T17:30:22.291Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:87:uninit()) uninit grabber: /dev/video0
 2021-06-01T17:30:22.300Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Stopped
 2021-06-01T17:30:22.301Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
 2021-06-01T17:30:22.301Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1
 2021-06-01T17:30:22.312Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=1024 height=768
 2021-06-01T17:30:22.322Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps
 2021-06-01T17:30:22.322Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
 2021-06-01T17:30:22.334Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
 2021-06-01T17:30:22.334Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
 2021-06-01T17:30:22.334Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
 2021-06-01T17:30:22.335Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Frame too small: 0 != 1572864
 2021-06-01T17:30:32.116Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Previous line repeats 3 times
 2021-06-01T17:30:32.116Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 1920, height: 1080 for capture
 2021-06-01T17:30:32.117Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:87:uninit()) uninit grabber: /dev/video0
 2021-06-01T17:30:32.122Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Stopped
 2021-06-01T17:30:32.124Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
 2021-06-01T17:30:32.124Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1
 2021-06-01T17:30:32.135Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=1920 height=1080
 2021-06-01T17:30:32.146Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps
 2021-06-01T17:30:32.146Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
 2021-06-01T17:30:32.181Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
 2021-06-01T17:30:32.181Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
 2021-06-01T17:30:32.181Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
 2021-06-01T17:30:32.182Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Frame too small: 0 != 4147200
 2021-06-01T17:30:56.373Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
 2021-06-01T17:30:56.374Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 1.000000 Hz, interpolationRate: 1.000000 Hz, timer: 25 ms, Dithering: 1, Decay: 1.000000 -> HalfTime: 100.000000 ms
 2021-06-01T17:31:10.910Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.50.93
Auto scrolling