2024-01-07T20:19:06.311Z [CORE] TTY is not attached to the log output 2024-01-07T20:19:06.361Z [MAIN] Database path: '/home/root/.hyperhdr/db/hyperhdr.db', readonlyMode = disabled 2024-01-07T20:19:06.361Z [MAIN] Starting HyperHdr - 20.0.0.0beta1, (HEAD detached at v20.0.0.0beta1) (GitHub-ccd22a1/558c7e0-1703192848), built: Dec 25 2023:21:31:41 2024-01-07T20:19:06.361Z [MAIN] Set user data path to '/home/root/.hyperhdr' 2024-01-07T20:19:06.361Z [INSTANCE_CFG] Loading instance configuration 2024-01-07T20:19:06.379Z [DB] Database opened: /home/root/.hyperhdr/db/hyperhdr.db 2024-01-07T20:19:06.535Z [INSTANCE_CFG] Settings database initialized 2024-01-07T20:19:06.549Z [SOUND_GRABBER] Sound device is disabled 2024-01-07T20:19:06.608Z [DAEMON] The AVF grabber can not be instantiated, because it has been left out from the build 2024-01-07T20:19:06.608Z [DAEMON] The MF grabber can not be instantiated, because it has been left out from the build 2024-01-07T20:19:06.608Z [DAEMON] !The v4l2 grabber can not be instantiated, because it has been left out from the build 2024-01-07T20:19:06.630Z [DAEMON] The USB grabber was disabled during build. FlatbufferServer now controlls the HDR state. 2024-01-07T20:19:06.631Z [JSONSERVER] (JsonServer.cpp:26) Created new instance 2024-01-07T20:19:06.633Z [JSONSERVER] Started on port 19444 2024-01-07T20:19:06.635Z [SSDP] (SSDPHandler.cpp:31) SSDPHandler is initialized 2024-01-07T20:19:06.610Z [HYPERHDR0] Starting the instance 2024-01-07T20:19:06.611Z [INSTANCE_CFG0] Loading instance configuration 2024-01-07T20:19:06.611Z [DB] Database opened: /home/root/.hyperhdr/db/hyperhdr.db 2024-01-07T20:19:06.751Z [INSTANCE_CFG0] Settings database initialized 2024-01-07T20:19:06.751Z [COMPONENTCTRL0] (ComponentController.cpp:30) ComponentController is initialized 2024-01-07T20:19:06.765Z [BLACKBORDER] Set mode to: default 2024-01-07T20:19:06.765Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:192) Set LED mapping type to advanced 2024-01-07T20:19:06.765Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:176) setSparseProcessing to 0 2024-01-07T20:19:06.765Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:103) ImageToLedManager initialized 2024-01-07T20:19:06.765Z [MUXER0] (Muxer.cpp:55) Muxer initialized 2024-01-07T20:19:06.767Z [COLORSPACE_CALIBRATION0] classicMode: no, gammas:[1.50, 1.50, 1.50], saturation: 1.00, luminance: 1.00, backLight: [enabled, threshold: 1, colored: yes] 2024-01-07T20:19:06.768Z [LED_CALIBRATION0] (LedCalibration.cpp:101) Calibration config '0' for LED segment: [0, 299] 2024-01-07T20:19:06.778Z [HYPERHDR0] Led strip RGB order is: rgb 2024-01-07T20:19:06.780Z [SMOOTHING0] High resolution clock is NOT STEADY! 2024-01-07T20:19:06.780Z [SMOOTHING0] Creating config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250 2024-01-07T20:19:06.780Z [SMOOTHING0] Clearing queued colors before: disabling. Smoothing configuration changed: restarting timer. 2024-01-07T20:19:06.780Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:19:06.780Z [SMOOTHING0] Selecting config (0) => type: Alternative, directMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250 2024-01-07T20:19:06.780Z [SMOOTHING0] Selecting config (0) => type: Alternative, directMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'. 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:310) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":300,"espHandshake":true,"maxRetry":0,"output":"ttyS0","rate":2000000,"refreshTime":0,"smoothingRefreshTime":0,"type":"adalight","white_channel_blue":255,"white_channel_calibration":true,"white_channel_green":255,"white_channel_limit":100,"white_channel_red":255}] 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:406) Refresh interval updated to 0ms 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:49) DeviceType : adalight 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) LedCount : 300 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) RefreshTime : 0 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:65) Device name : ttyS0 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:66) Auto selection: 0 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Baud rate : 2000000 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) ESP handshake : ON 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Delayed open : 0 2024-01-07T20:19:06.782Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) Retry limit : 0 2024-01-07T20:19:06.783Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:79) Adalight driver with activated high speeed & data integration check AWA protocol 2024-01-07T20:19:06.783Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:88) Adalight header for 300 leds: AwA 0x01 0x2b 0x7f 2024-01-07T20:19:06.783Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:45) White channel limit: 255, red: 255, green: 255, blue: 255 2024-01-07T20:19:06.783Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T20:19:06.783Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyS0 2024-01-07T20:19:06.783Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): ttyS0, Baud rate [2000000]bps 2024-01-07T20:19:06.784Z [HYPER_MANAGER] HyperHDR instance 'First LED instance' has been started 2024-01-07T20:19:06.784Z [HYPERHDR0] The instance is running 2024-01-07T20:19:06.784Z [MUXER0] Register new input 'System/VIDEOGRABBER' with priority 240 as inactive 2024-01-07T20:19:06.784Z [COMPONENTCTRL0] Video capture device: enabled 2024-01-07T20:19:06.791Z [WEBSERVER] Initialize Webserver 2024-01-07T20:19:06.793Z [FLATBUFSERVER] Started on port 19400 2024-01-07T20:19:06.793Z [FLATBUFSERVER] Started local domain socket server: 'hyperhdr-domain' 2024-01-07T20:19:06.795Z [NETFORWARDER] Forwarder has changed state to disabled 2024-01-07T20:19:06.810Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: ttyS0 2024-01-07T20:19:06.810Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: /dev/ttyS0 2024-01-07T20:19:06.810Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: 2024-01-07T20:19:06.810Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: 2024-01-07T20:19:06.810Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x0 2024-01-07T20:19:06.810Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x0 2024-01-07T20:19:06.810Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber: 2024-01-07T20:19:06.827Z [WEBSERVER] Apply Webserver settings 2024-01-07T20:19:06.828Z [WEBSERVER] Set document root to: :/www 2024-01-07T20:19:06.828Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTP)' on port: 8090 2024-01-07T20:19:06.828Z [SSDP] (SSDPHandler.cpp:93) The local address is empty 2024-01-07T20:19:06.828Z [WEBSERVER] Initialize Webserver 2024-01-07T20:19:06.829Z [WEBSERVER] Apply Webserver settings 2024-01-07T20:19:06.829Z [WEBSERVER] Set document root to: :/www 2024-01-07T20:19:06.841Z [WEBSERVER] Setup SSL certificate 2024-01-07T20:19:06.842Z [WEBSERVER] Setup private SSL key 2024-01-07T20:19:06.842Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTPS)' on port: 8092 2024-01-07T20:19:06.842Z [SSDP] (SSDPHandler.cpp:42) SSDPHandler is initializing 2024-01-07T20:19:06.843Z [SSDP] (SSDPHandler.cpp:196) The local address is: 192.168.0.41 2024-01-07T20:19:06.843Z [SSDP] (SSDPServer.cpp:95) Initialize the SSDP server 2024-01-07T20:19:06.845Z [WEBSERVER] (StaticFileServing.cpp:68) SSDP description is set up 2024-01-07T20:19:06.845Z [SSDP] Starting the SSDP server 2024-01-07T20:19:07.003Z [MUXER0] Set visible priority to 255 2024-01-07T20:19:07.004Z [HYPERHDR0] New priority[255], previous [255] 2024-01-07T20:19:07.004Z [HYPERHDR0] No source left -> switch LED-Device off 2024-01-07T20:19:07.004Z [SMOOTHING0] Clearing queued colors before: disabling 2024-01-07T20:19:07.004Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:19:07.004Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0 2024-01-07T20:19:08.123Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device 2024-01-07T20:19:08.124Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T20:19:08.124Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T20:19:08.124Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:270) Disable the device 2024-01-07T20:19:08.124Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T20:19:08.124Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off 2024-01-07T20:19:08.124Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:517) Set LED strip to black/power off 2024-01-07T20:19:08.125Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 0 2024-01-07T20:19:08.132Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:143) Flush was successful 2024-01-07T20:19:08.132Z [EFFECTENGINE0] (EffectEngine.cpp:92) Start the effect: name [Rainbow swirl fast] 2024-01-07T20:19:08.132Z [MUXER0] Register new input 'System/EFFECT' with priority 0 as inactive 2024-01-07T20:19:08.133Z [HYPERHDR0] Boot effect: animation set to 'Rainbow swirl fast' [started] 2024-01-07T20:19:08.139Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 0 2024-01-07T20:19:08.142Z [MUXER0] Priority 0 is now active 2024-01-07T20:19:08.142Z [MUXER0] Set visible priority to 0 2024-01-07T20:19:08.142Z [HYPERHDR0] New priority[0], previous [255] 2024-01-07T20:19:08.142Z [HYPERHDR0] New source available -> switch LED-Device on 2024-01-07T20:19:08.142Z [SMOOTHING0] Clearing queued colors before: enabling 2024-01-07T20:19:08.142Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:19:08.142Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0 2024-01-07T20:19:08.143Z [IMAGETOLED_MNG0] Total index number is: 1200 (memory: 1200). User sparse processing is: disabled, image size: 80 x 45, area number: 300 2024-01-07T20:19:08.337Z [SERVICE_mDNS] Starting the network discovery thread 2024-01-07T20:19:08.734Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:161) Serial port is closed: ttyS0 2024-01-07T20:19:08.734Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T20:19:08.734Z [COMPONENTCTRL0] LED device: disabled 2024-01-07T20:19:08.734Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyS0 2024-01-07T20:19:08.735Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): ttyS0, Baud rate [2000000]bps 2024-01-07T20:19:08.749Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: ttyS0 2024-01-07T20:19:08.749Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: /dev/ttyS0 2024-01-07T20:19:08.749Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: 2024-01-07T20:19:08.750Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: 2024-01-07T20:19:08.750Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x0 2024-01-07T20:19:08.750Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x0 2024-01-07T20:19:08.750Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber: 2024-01-07T20:19:10.055Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device 2024-01-07T20:19:10.055Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T20:19:10.055Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T20:19:10.055Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T20:19:11.144Z [EFFECT0(Rainbo...)] The effect quits with priority: 0 2024-01-07T20:19:11.144Z [MUXER0] Removed source priority 0 2024-01-07T20:19:11.145Z [MUXER0] Set visible priority to 255 2024-01-07T20:19:11.145Z [HYPERHDR0] New priority[255], previous [0] 2024-01-07T20:19:11.145Z [HYPERHDR0] No source left -> switch LED-Device off 2024-01-07T20:19:11.145Z [SMOOTHING0] Clearing queued colors before: disabling 2024-01-07T20:19:11.145Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:19:11.145Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0 2024-01-07T20:19:11.145Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:270) Disable the device 2024-01-07T20:19:11.145Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off 2024-01-07T20:19:11.145Z [EFFECTENGINE0] Effect 'Rainbow swirl fast' has finished. 2024-01-07T20:19:11.145Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:517) Set LED strip to black/power off 2024-01-07T20:19:11.145Z [EFFECT0(Rainbo...)] Effect named: 'Rainbow swirl fast' is deleted 2024-01-07T20:19:11.158Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:143) Flush was successful 2024-01-07T20:19:11.760Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:161) Serial port is closed: ttyS0 2024-01-07T20:19:11.760Z [COMPONENTCTRL0] LED device: disabled 2024-01-07T20:19:42.344Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:192.168.0.93 2024-01-07T20:19:42.861Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.93 2024-01-07T20:20:38.576Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.0.93 2024-01-07T20:20:48.465Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":395}] 2024-01-07T20:20:48.481Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyS0)","value":"ttyS0"},{"name":" (/dev/ttyS1)","value":"ttyS1"},{"name":" (/dev/ttyS2)","value":"ttyS2"}],"ledDeviceType":"adalight"}] 2024-01-07T20:21:05.699Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'. 2024-01-07T20:21:05.699Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:310) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":300,"espHandshake":true,"hardwareLedCount":null,"maxRetry":0,"output":"auto","rate":2000000,"refreshTime":0,"smoothingRefreshTime":0,"type":"adalight","white_channel_blue":255,"white_channel_calibration":true,"white_channel_green":255,"white_channel_limit":100,"white_channel_red":255}] 2024-01-07T20:21:05.699Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:406) Refresh interval updated to 0ms 2024-01-07T20:21:05.699Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:49) DeviceType : adalight 2024-01-07T20:21:05.699Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) LedCount : 300 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) RefreshTime : 0 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:65) Device name : auto 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:66) Auto selection: 1 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Baud rate : 2000000 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) ESP handshake : ON 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Delayed open : 0 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) Retry limit : 0 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:79) Adalight driver with activated high speeed & data integration check AWA protocol 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:88) Adalight header for 300 leds: AwA 0x01 0x2b 0x7f 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:45) White channel limit: 255, red: 255, green: 255, blue: 255 2024-01-07T20:21:05.700Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T20:21:05.716Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS0 => ttyS0), VID: 0x0, PID: 0x0 2024-01-07T20:21:05.716Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS1 => ttyS1), VID: 0x0, PID: 0x0 2024-01-07T20:21:05.716Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS2 => ttyS2), VID: 0x0, PID: 0x0 2024-01-07T20:21:05.733Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS0 => ttyS0), VID: 0x0, PID: 0x0 2024-01-07T20:21:05.733Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS1 => ttyS1), VID: 0x0, PID: 0x0 2024-01-07T20:21:05.733Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS2 => ttyS2), VID: 0x0, PID: 0x0 2024-01-07T20:21:05.748Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS0 => ttyS0), VID: 0x0, PID: 0x0 2024-01-07T20:21:05.749Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS1 => ttyS1), VID: 0x0, PID: 0x0 2024-01-07T20:21:05.749Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS2 => ttyS2), VID: 0x0, PID: 0x0 2024-01-07T20:21:05.764Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Found serial port device: (/dev/ttyS0 => ttyS0) 2024-01-07T20:21:05.764Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyS0 2024-01-07T20:21:05.764Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): ttyS0, Baud rate [2000000]bps 2024-01-07T20:21:05.779Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: ttyS0 2024-01-07T20:21:05.780Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: /dev/ttyS0 2024-01-07T20:21:05.780Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: 2024-01-07T20:21:05.780Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: 2024-01-07T20:21:05.780Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x0 2024-01-07T20:21:05.780Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x0 2024-01-07T20:21:05.780Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber: 2024-01-07T20:21:07.086Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device 2024-01-07T20:21:07.086Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T20:21:07.086Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T20:21:07.086Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T20:21:08.944Z [WEBSOCKET] (WebSocketClient.cpp:188) send close: 1000 2024-01-07T20:21:09.930Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:192.168.0.93 2024-01-07T20:21:11.018Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":364}] 2024-01-07T20:21:11.034Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyS0)","value":"ttyS0"},{"name":" (/dev/ttyS1)","value":"ttyS1"},{"name":" (/dev/ttyS2)","value":"ttyS2"}],"ledDeviceType":"adalight"}] 2024-01-07T20:21:45.864Z [SMOOTHING0] Clearing queued colors before: disabling 2024-01-07T20:21:45.864Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:21:45.864Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:270) Disable the device 2024-01-07T20:21:45.864Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off 2024-01-07T20:21:45.864Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:517) Set LED strip to black/power off 2024-01-07T20:21:45.873Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:143) Flush was successful 2024-01-07T20:21:46.474Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:161) Serial port is closed: ttyS0 2024-01-07T20:21:46.475Z [COMPONENTCTRL0] LED device: disabled 2024-01-07T20:21:47.422Z [SMOOTHING0] Clearing queued colors before: enabling 2024-01-07T20:21:47.423Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:21:47.423Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T20:21:47.437Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS0 => ttyS0), VID: 0x0, PID: 0x0 2024-01-07T20:21:47.437Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS1 => ttyS1), VID: 0x0, PID: 0x0 2024-01-07T20:21:47.437Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS2 => ttyS2), VID: 0x0, PID: 0x0 2024-01-07T20:21:47.452Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS0 => ttyS0), VID: 0x0, PID: 0x0 2024-01-07T20:21:47.453Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS1 => ttyS1), VID: 0x0, PID: 0x0 2024-01-07T20:21:47.453Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS2 => ttyS2), VID: 0x0, PID: 0x0 2024-01-07T20:21:47.468Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS0 => ttyS0), VID: 0x0, PID: 0x0 2024-01-07T20:21:47.468Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS1 => ttyS1), VID: 0x0, PID: 0x0 2024-01-07T20:21:47.468Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Skipping this device for now: (/dev/ttyS2 => ttyS2), VID: 0x0, PID: 0x0 2024-01-07T20:21:47.483Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Found serial port device: (/dev/ttyS0 => ttyS0) 2024-01-07T20:21:47.483Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyS0 2024-01-07T20:21:47.483Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): ttyS0, Baud rate [2000000]bps 2024-01-07T20:21:47.497Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: ttyS0 2024-01-07T20:21:47.497Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: /dev/ttyS0 2024-01-07T20:21:47.497Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: 2024-01-07T20:21:47.497Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: 2024-01-07T20:21:47.497Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x0 2024-01-07T20:21:47.497Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x0 2024-01-07T20:21:47.497Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber: 2024-01-07T20:21:48.806Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device 2024-01-07T20:21:48.806Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T20:21:48.806Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T20:21:48.806Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T20:22:15.724Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":786}] 2024-01-07T20:22:15.740Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyS0)","value":"ttyS0"},{"name":" (/dev/ttyS1)","value":"ttyS1"},{"name":" (/dev/ttyS2)","value":"ttyS2"}],"ledDeviceType":"adalight"}] 2024-01-07T20:22:25.441Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'. 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:310) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":300,"espHandshake":true,"hardwareLedCount":null,"maxRetry":0,"output":"ttyS0","rate":2000000,"refreshTime":0,"smoothingRefreshTime":0,"type":"adalight","white_channel_blue":255,"white_channel_calibration":true,"white_channel_green":255,"white_channel_limit":100,"white_channel_red":255}] 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:406) Refresh interval updated to 0ms 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:49) DeviceType : adalight 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) LedCount : 300 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) RefreshTime : 0 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:65) Device name : ttyS0 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:66) Auto selection: 0 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Baud rate : 2000000 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) ESP handshake : ON 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Delayed open : 0 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) Retry limit : 0 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:79) Adalight driver with activated high speeed & data integration check AWA protocol 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:88) Adalight header for 300 leds: AwA 0x01 0x2b 0x7f 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:45) White channel limit: 255, red: 255, green: 255, blue: 255 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyS0 2024-01-07T20:22:25.442Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): ttyS0, Baud rate [2000000]bps 2024-01-07T20:22:25.458Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: ttyS0 2024-01-07T20:22:25.458Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: /dev/ttyS0 2024-01-07T20:22:25.458Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: 2024-01-07T20:22:25.458Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: 2024-01-07T20:22:25.458Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x0 2024-01-07T20:22:25.458Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x0 2024-01-07T20:22:25.458Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber: 2024-01-07T20:22:26.765Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device 2024-01-07T20:22:26.765Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T20:22:26.765Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T20:22:28.080Z [WEBSOCKET] (WebSocketClient.cpp:188) send close: 1000 2024-01-07T20:22:29.074Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:192.168.0.93 2024-01-07T20:22:30.173Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":113}] 2024-01-07T20:22:30.189Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyS0)","value":"ttyS0"},{"name":" (/dev/ttyS1)","value":"ttyS1"},{"name":" (/dev/ttyS2)","value":"ttyS2"}],"ledDeviceType":"adalight"}] 2024-01-07T20:22:46.297Z [SMOOTHING0] Clearing queued colors before: disabling 2024-01-07T20:22:46.297Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:22:46.297Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:270) Disable the device 2024-01-07T20:22:46.297Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off 2024-01-07T20:22:46.297Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:517) Set LED strip to black/power off 2024-01-07T20:22:46.306Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:143) Flush was successful 2024-01-07T20:22:46.908Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:161) Serial port is closed: ttyS0 2024-01-07T20:22:46.908Z [COMPONENTCTRL0] LED device: disabled 2024-01-07T20:22:47.257Z [SMOOTHING0] Clearing queued colors before: enabling 2024-01-07T20:22:47.257Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:22:47.257Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T20:22:47.257Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyS0 2024-01-07T20:22:47.257Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): ttyS0, Baud rate [2000000]bps 2024-01-07T20:22:47.272Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: ttyS0 2024-01-07T20:22:47.272Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: /dev/ttyS0 2024-01-07T20:22:47.272Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: 2024-01-07T20:22:47.272Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: 2024-01-07T20:22:47.272Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x0 2024-01-07T20:22:47.272Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x0 2024-01-07T20:22:47.272Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber: 2024-01-07T20:22:48.578Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device 2024-01-07T20:22:48.578Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T20:22:48.578Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T20:22:48.578Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T20:22:59.258Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":61}] 2024-01-07T20:22:59.273Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyS0)","value":"ttyS0"},{"name":" (/dev/ttyS1)","value":"ttyS1"},{"name":" (/dev/ttyS2)","value":"ttyS2"}],"ledDeviceType":"adalight"}] 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'. 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:310) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":300,"espHandshake":true,"hardwareLedCount":null,"maxRetry":0,"output":"ttyS1","rate":2000000,"refreshTime":0,"smoothingRefreshTime":0,"type":"adalight","white_channel_blue":255,"white_channel_calibration":true,"white_channel_green":255,"white_channel_limit":100,"white_channel_red":255}] 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:406) Refresh interval updated to 0ms 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:49) DeviceType : adalight 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) LedCount : 300 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) RefreshTime : 0 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:65) Device name : ttyS1 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:66) Auto selection: 0 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Baud rate : 2000000 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) ESP handshake : ON 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Delayed open : 0 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) Retry limit : 0 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:79) Adalight driver with activated high speeed & data integration check AWA protocol 2024-01-07T20:23:08.982Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:88) Adalight header for 300 leds: AwA 0x01 0x2b 0x7f 2024-01-07T20:23:08.983Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:45) White channel limit: 255, red: 255, green: 255, blue: 255 2024-01-07T20:23:08.983Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T20:23:08.983Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyS1 2024-01-07T20:23:08.983Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): ttyS1, Baud rate [2000000]bps 2024-01-07T20:23:09.000Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: ttyS1 2024-01-07T20:23:09.000Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: /dev/ttyS1 2024-01-07T20:23:09.000Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: 2024-01-07T20:23:09.000Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: 2024-01-07T20:23:09.001Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x0 2024-01-07T20:23:09.001Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x0 2024-01-07T20:23:09.001Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber: 2024-01-07T20:23:10.307Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device 2024-01-07T20:23:10.307Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T20:23:10.307Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T20:23:12.828Z [WEBSOCKET] (WebSocketClient.cpp:188) send close: 1000 2024-01-07T20:23:13.898Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:192.168.0.93 2024-01-07T20:23:15.196Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":577}] 2024-01-07T20:23:15.211Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyS0)","value":"ttyS0"},{"name":" (/dev/ttyS1)","value":"ttyS1"},{"name":" (/dev/ttyS2)","value":"ttyS2"}],"ledDeviceType":"adalight"}] 2024-01-07T20:23:19.505Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.93 2024-01-07T20:24:39.610Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.0.93 2024-01-07T20:24:40.422Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":866}] 2024-01-07T20:24:40.440Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyS0)","value":"ttyS0"},{"name":" (/dev/ttyS1)","value":"ttyS1"},{"name":" (/dev/ttyS2)","value":"ttyS2"}],"ledDeviceType":"adalight"}] 2024-01-07T20:25:24.705Z [SMOOTHING0] Clearing queued colors before: disabling 2024-01-07T20:25:24.705Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:25:24.705Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:270) Disable the device 2024-01-07T20:25:24.705Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off 2024-01-07T20:25:24.705Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:517) Set LED strip to black/power off 2024-01-07T20:25:24.714Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:143) Flush was successful 2024-01-07T20:25:25.317Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:161) Serial port is closed: ttyS1 2024-01-07T20:25:25.317Z [COMPONENTCTRL0] LED device: disabled 2024-01-07T20:25:26.532Z [SMOOTHING0] Clearing queued colors before: enabling 2024-01-07T20:25:26.532Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T20:25:26.532Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T20:25:26.532Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyS1 2024-01-07T20:25:26.532Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): ttyS1, Baud rate [2000000]bps 2024-01-07T20:25:26.550Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: ttyS1 2024-01-07T20:25:26.550Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: /dev/ttyS1 2024-01-07T20:25:26.550Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: 2024-01-07T20:25:26.550Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: 2024-01-07T20:25:26.550Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x0 2024-01-07T20:25:26.550Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x0 2024-01-07T20:25:26.550Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber: 2024-01-07T20:25:27.856Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device 2024-01-07T20:25:27.857Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T20:25:27.857Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T20:25:27.857Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T20:25:29.402Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.93 2024-01-07T20:26:52.740Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.0.93 2024-01-07T20:26:53.320Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":229}] 2024-01-07T20:26:53.340Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyS0)","value":"ttyS0"},{"name":" (/dev/ttyS1)","value":"ttyS1"},{"name":" (/dev/ttyS2)","value":"ttyS2"}],"ledDeviceType":"adalight"}] 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'. 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:310) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":300,"espHandshake":true,"hardwareLedCount":null,"maxRetry":0,"output":"ttyS2","rate":2000000,"refreshTime":0,"smoothingRefreshTime":0,"type":"adalight","white_channel_blue":255,"white_channel_calibration":true,"white_channel_green":255,"white_channel_limit":100,"white_channel_red":255}] 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:406) Refresh interval updated to 0ms 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:49) DeviceType : adalight 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) LedCount : 300 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) RefreshTime : 0 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:65) Device name : ttyS2 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:66) Auto selection: 0 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Baud rate : 2000000 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) ESP handshake : ON 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Delayed open : 0 2024-01-07T20:27:03.080Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) Retry limit : 0 2024-01-07T20:27:03.081Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:79) Adalight driver with activated high speeed & data integration check AWA protocol 2024-01-07T20:27:03.081Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:88) Adalight header for 300 leds: AwA 0x01 0x2b 0x7f 2024-01-07T20:27:03.081Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:45) White channel limit: 255, red: 255, green: 255, blue: 255 2024-01-07T20:27:03.081Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T20:27:03.081Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyS2 2024-01-07T20:27:03.081Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): ttyS2, Baud rate [2000000]bps 2024-01-07T20:27:03.097Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: ttyS2 2024-01-07T20:27:03.097Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: /dev/ttyS2 2024-01-07T20:27:03.097Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: 2024-01-07T20:27:03.097Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: 2024-01-07T20:27:03.097Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x0 2024-01-07T20:27:03.097Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x0 2024-01-07T20:27:03.097Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber: 2024-01-07T20:27:04.410Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device 2024-01-07T20:27:04.410Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T20:27:04.410Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T20:27:05.193Z [WEBSOCKET] (WebSocketClient.cpp:188) send close: 1000 2024-01-07T20:27:06.477Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:192.168.0.93 2024-01-07T20:27:07.398Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":913}] 2024-01-07T20:27:07.414Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyS0)","value":"ttyS0"},{"name":" (/dev/ttyS1)","value":"ttyS1"},{"name":" (/dev/ttyS2)","value":"ttyS2"}],"ledDeviceType":"adalight"}] 2024-01-07T20:27:10.069Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.93 2024-01-07T20:27:42.805Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.0.93 2024-01-07T20:27:53.284Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}] 2024-01-07T20:28:44.554Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:192.168.0.207 2024-01-07T20:28:48.595Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.207 2024-01-07T20:29:02.967Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.0.207 2024-01-07T20:29:09.927Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.207 2024-01-07T20:29:33.116Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.0.207 2024-01-07T20:29:47.356Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.207