Hi,
I have an RP3 with openelec. All setup and installed. Hyperion starts with the effect at thepower up. Via Hypercon all settings done. I can set all colours with the colorwheel. I can grab an image with the grabber. But the leds do not respind on video.
What can be wrong?
The framegrabber is a BasetechBR116
This is my log:
SSH Traffic:
ssh connected
ssh out: killall hyperiond 2>/dev/null ; /storage/hyperion/bin/hyperion-v4l2.sh --device /dev/video0 --video-standard PAL --input 0 --width -1 --height -1 --crop-left 22 --crop-right 20 --crop-top 20 --crop-bottom 20 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --3DSBS --screenshot
ssh in: hyperion-v4l2:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:25
ssh in: V4L2GRABBER INFO: width=720 height=576
ssh in: V4L2GRABBER INFO: pixel format=YUYV
ssh in: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: V4L2GRABBER INFO: started
ssh in: V4L2GRABBER INFO: stopped
sftp getFile(./screenshot.png, java.awt.Image)
ssh out: killall hyperiond 2>/dev/null ; /storage/hyperion/bin/hyperion-v4l2.sh --device /dev/video0 --video-standard PAL --input 0 --width -1 --height -1 --crop-left 22 --crop-right 20 --crop-top 20 --crop-bottom 20 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --3DSBS --screenshot
ssh in: hyperion-v4l2:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:25
ssh in: V4L2GRABBER INFO: width=720 height=576
ssh in: V4L2GRABBER INFO: pixel format=YUYV
ssh in: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: V4L2GRABBER INFO: started
ssh in: V4L2GRABBER INFO: stopped
sftp getFile(./screenshot.png, java.awt.Image)
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (519)
ssh in: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Build Time: Apr 5 2018 01:57:25
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 80]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 80]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 80]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "name" : "MyHyperionConfig",
ssh in: "output" : "/dev/spidev0.0",
ssh in: "rate" : 250000,
ssh in: "type" : "ws2801"
ssh in: }
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=40;settlingTime_ms=100;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Knight rider' EFFECTENGINE INFO: run effect Knight rider on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.05 (13)
ssh in: BLACKBORDER INFO: mode:default
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: INFO: Proto server created and started on port 19445
ssh in: INFO: Boblight server created and started on port 19333
ssh in: V4L2GRABBER INFO: width=720 height=576
ssh in: V4L2GRABBER INFO: pixel format=YUYV
ssh in: BLACKBORDER INFO: threshold set to 0.05 (13)
ssh in: BLACKBORDER INFO: mode:default
ssh in: V4L2GRABBER INFO: signal threshold set to: {25,25,255}
ssh in: V4L2GRABBER INFO: started
ssh in: INFO: V4L2 grabber created and started
ssh in: KODICHECK ERROR: Kodi Connection error (0)
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: V4L2GRABBER INFO: stopped
ssh in: EFFECTENGINE INFO: effect finished
ssh in: V4L2GRABBER INFO: started
ssh in: V4L2GRABBER INFO: Signal lost
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: INFO: Application closed with code 0
ssh in: V4L2GRABBER INFO: stopped
ssh in: KODICHECK INFO: Kodi Disconnected
ssh in: EFFECTENGINE INFO: Cleaning up Python interpreter