1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SOLVED ambient blijft op een wit en groen licht

Discussion in 'Dutch Talk' started by the1one, 12 January 2021.

  1. the1one

    the1one Member

    Messages:
    47
    net terug getest en boot is ook een beetje flikker.
    ga nu al de gegevens ingeven die jij hierboven staan hebt.
     
  2. the1one

    the1one Member

    Messages:
    47
    deze melding krijg ik bij het installeren van het 3de tekstje

    E: Unable to locate package libcec4-dev
     
  3. jeroen warmerdam

    jeroen warmerdam Raspberry 3B / APA102 / Hyperion.NG relaisbox

    Messages:
    578
    Hardware:
    RPi3

    sudo apt-get update
    auso apt-get upgrade

    sudo apt-get -d install libcec4
    sudo apt-get install libcec4

    zo zou hij het wel moeten doen, doet ie dat niet dan zijn deze packages libcec4 niet binnengehaald
    ze zeggen hier dat je deze wel nodig kan hebben bij Hyperion.NG 2.09 dus daarom heb ik deze erbij gezet.
     
    Last edited: 18 January 2021
  4. the1one

    the1one Member

    Messages:
    47
    hallo
    een tijdje geleden maar ik heb eerst de level shifters besteld en deze zijn vandaag aangekomen en zowaar alles werkt perfect!! thnx
     
  5. the1one

    the1one Member

    Messages:
    47
  6. the1one

    the1one Member

    Messages:
    47
    ik kan hem direct terug opzetten maar dan vangt hij geen beeld meer.
    na reboot pi alles terug ok. wat kan dit zijn?
     
  7. jeroen warmerdam

    jeroen warmerdam Raspberry 3B / APA102 / Hyperion.NG relaisbox

    Messages:
    578
    Hardware:
    RPi3
    Even kijken in mijn lijst met antwoorden, er was laatst een topic ook met USB grabber problemen. Staat uitgebreid beschreven wat je kan doen.

    Het zal waarschijnlijk een power probleem zijn op USB
     
    • Like Like x 1
  8. the1one

    the1one Member

    Messages:
    47
    sorry ga ik direct doen:omg:
     
  9. the1one

    the1one Member

    Messages:
    47
    heb sd kaart uigehaald en in config.txt deze lijn toegevoed die jij had voorgesteld ergens anders.
    max_usb_current=1

    terug opnieuw opgestart en voorlopig werkt alles weer. maar dat was daarstraks ook ik test even hele tijd uit.
    bedankt voor de hulp al!
     
  10. the1one

    the1one Member

    Messages:
    47
    heeft niets geholpen. na ongeveer 10 min valt hij uit en als ik hem terug opzet is er sneeuw.:mad:
     
  11. jeroen warmerdam

    jeroen warmerdam Raspberry 3B / APA102 / Hyperion.NG relaisbox

    Messages:
    578
    Hardware:
    RPi3
    kan je eens als hij uitgevallen is een debug-log posten hier? misschien kan je in Hyperion zien waarom en hoe ie uitvalt.
     
  12. the1one

    the1one Member

    Messages:
    47
    Prima! Nu werkt hij al een uurtje
     
  13. jeroen warmerdam

    jeroen warmerdam Raspberry 3B / APA102 / Hyperion.NG relaisbox

    Messages:
    578
    Hardware:
    RPi3

    dat is vreemd, heb je ergens een draadbreuk ofzo of is er iets anders aan de hand :classy:
     
    • Like Like x 1
  14. the1one

    the1one Member

    Messages:
    47
    ik denk het niet. gisteren is hij heel de avond verder gewerkt vlak voor ik ging slapen is hij weer uitgevallen.
     
  15. the1one

    the1one Member

    Messages:
    47
    vandaag is er een nieuwe capture binnen gekomen geen 4K die werkt ook weer prima maar daarjuist na 10 min uitgevallen en nadien moet ik stroom van capture afhalen 1 hdmi in uitrekken, beide terug in en alles werkt prima!
     
  16. the1one

    the1one Member

    Messages:
    47
    2021-01-28T16:38:33.794Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now enabled 2021-01-28T16:38:33.796Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000 2021-01-28T16:38:33.797Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12} 2021-01-28T16:41:25.154Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:87:uninit()) uninit grabber: /dev/video0 2021-01-28T16:41:25.159Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Stopped 2021-01-28T16:41:25.161Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0 2021-01-28T16:41:25.161Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1 2021-01-28T16:41:25.162Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480 2021-01-28T16:41:25.164Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps 2021-01-28T16:41:25.164Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV 2021-01-28T16:41:25.173Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started 2021-01-28T16:41:25.173Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000 2021-01-28T16:41:25.174Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12} 2021-01-28T16:42:12.454Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.900000,0.900000 x 0.980000,0.980000 2021-01-28T16:42:12.454Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12} 2021-01-28T16:42:46.906Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T16:42:47.606Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T16:43:54.895Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T16:43:55.910Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T16:43:55.910Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T16:43:55.910Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T16:43:55.910Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T16:44:03.288Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T16:44:03.289Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T16:44:03.289Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T16:44:03.289Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T16:44:03.289Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T16:45:32.696Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T16:45:32.763Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T16:49:48.929Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T16:49:48.966Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T16:50:42.737Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Throws error nr: VIDIOC_DQBUF error code 19, No such device 2021-01-28T16:50:42.738Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) VIDIOC_STREAMOFF error code 19, No such device 2021-01-28T16:50:42.740Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Stopped 2021-01-28T16:50:43.576Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T16:50:43.576Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T16:50:43.576Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T16:50:43.577Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T16:52:41.136Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:270:clearInput()) Removed source priority 240 2021-01-28T16:52:41.136Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: disabled 2021-01-28T16:52:41.139Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:58:stop()) Grabber stop() 2021-01-28T16:52:41.766Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive 2021-01-28T16:52:41.766Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled 2021-01-28T16:52:42.005Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0 2021-01-28T16:52:42.006Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1 2021-01-28T16:52:42.008Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480 2021-01-28T16:52:42.010Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps 2021-01-28T16:52:42.011Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV 2021-01-28T16:52:42.022Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started 2021-01-28T16:52:42.023Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start() 2021-01-28T16:52:42.177Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T16:52:42.177Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T16:52:42.178Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T16:52:42.178Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T16:52:50.637Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T16:52:51.552Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T16:52:51.552Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T16:52:51.553Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T16:52:51.553Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T16:52:57.166Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T16:52:57.168Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T16:52:57.168Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T16:52:57.169Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T16:52:57.169Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T16:54:08.483Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T16:54:09.502Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T16:54:09.502Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T16:54:09.502Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T16:54:09.503Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T16:55:53.317Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T16:55:53.317Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T16:55:53.317Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T16:55:53.317Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T16:55:53.318Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T16:56:00.942Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T16:56:01.962Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T16:56:01.962Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T16:56:01.963Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T16:56:01.963Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T16:56:04.906Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T16:56:04.906Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T16:56:04.907Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T16:56:04.907Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T16:56:04.907Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T16:56:16.732Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Throws error nr: VIDIOC_DQBUF error code 19, No such device 2021-01-28T16:56:16.737Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) VIDIOC_STREAMOFF error code 19, No such device 2021-01-28T16:56:16.744Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Stopped 2021-01-28T16:56:17.518Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T16:56:17.518Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T16:56:17.518Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T16:56:17.519Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T16:56:37.240Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:270:clearInput()) Removed source priority 240 2021-01-28T16:56:37.240Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: disabled 2021-01-28T16:56:37.241Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:58:stop()) Grabber stop() 2021-01-28T16:56:37.846Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive 2021-01-28T16:56:37.847Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled 2021-01-28T16:56:38.095Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0 2021-01-28T16:56:38.095Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1 2021-01-28T16:56:38.097Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480 2021-01-28T16:56:38.098Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps 2021-01-28T16:56:38.098Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV 2021-01-28T16:56:38.108Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started 2021-01-28T16:56:38.108Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start() 2021-01-28T16:56:38.262Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T16:56:38.264Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T16:56:38.264Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T16:56:38.264Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T16:57:03.102Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Throws error nr: VIDIOC_DQBUF error code 19, No such device 2021-01-28T16:57:03.103Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) VIDIOC_STREAMOFF error code 19, No such device 2021-01-28T16:57:03.107Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Stopped 2021-01-28T16:57:04.004Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T16:57:04.005Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T16:57:04.005Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T16:57:04.005Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T16:59:55.072Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:270:clearInput()) Removed source priority 240 2021-01-28T16:59:55.072Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: disabled 2021-01-28T16:59:55.073Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:58:stop()) Grabber stop() 2021-01-28T16:59:55.680Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive 2021-01-28T16:59:55.680Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled 2021-01-28T16:59:55.915Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0 2021-01-28T16:59:55.915Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1 2021-01-28T16:59:55.916Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480 2021-01-28T16:59:55.918Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps 2021-01-28T16:59:55.918Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV 2021-01-28T16:59:55.928Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started 2021-01-28T16:59:55.929Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start() 2021-01-28T16:59:56.047Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T16:59:56.047Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T16:59:56.048Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T16:59:56.048Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T17:00:04.475Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T17:00:05.494Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T17:00:05.494Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T17:00:05.495Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T17:00:05.495Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T17:00:10.905Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T17:00:10.905Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T17:00:10.905Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T17:00:10.906Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T17:00:10.906Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T17:00:48.014Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T17:00:49.005Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T17:00:49.005Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T17:00:49.005Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T17:00:49.006Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T17:00:50.620Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Throws error nr: VIDIOC_DQBUF error code 19, No such device 2021-01-28T17:00:50.620Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) VIDIOC_STREAMOFF error code 19, No such device 2021-01-28T17:00:50.628Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Stopped 2021-01-28T17:01:30.985Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:270:clearInput()) Removed source priority 240 2021-01-28T17:01:30.986Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: disabled 2021-01-28T17:01:30.987Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:58:stop()) Grabber stop() 2021-01-28T17:01:31.529Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive 2021-01-28T17:01:31.529Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled 2021-01-28T17:01:31.765Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0 2021-01-28T17:01:31.765Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1 2021-01-28T17:01:31.766Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480 2021-01-28T17:01:31.768Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps 2021-01-28T17:01:31.768Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV 2021-01-28T17:01:31.778Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started 2021-01-28T17:01:31.779Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start() 2021-01-28T17:01:32.864Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T17:01:32.865Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T17:01:32.865Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T17:01:32.865Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T17:01:32.865Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T17:02:48.183Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T17:02:49.097Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T17:02:49.098Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T17:02:49.099Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T17:02:49.100Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T17:02:49.947Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T17:02:49.948Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T17:02:49.948Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T17:02:49.948Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T17:02:49.948Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T17:03:16.663Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T17:03:16.795Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T17:03:56.772Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T17:03:57.369Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T17:03:59.469Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T17:04:00.488Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T17:04:00.488Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T17:04:00.488Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T17:04:00.488Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T17:04:02.433Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T17:04:02.434Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T17:04:02.434Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T17:04:02.434Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T17:04:02.434Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T17:04:04.398Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal lost 2021-01-28T17:04:05.417Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-28T17:04:05.417Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-28T17:04:05.417Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-28T17:04:05.417Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-28T17:04:12.127Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detected 2021-01-28T17:04:12.129Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-28T17:04:12.130Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-28T17:04:12.131Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-28T17:04:12.131Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-28T17:04:38.037Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.24
     
  17. jeroen warmerdam

    jeroen warmerdam Raspberry 3B / APA102 / Hyperion.NG relaisbox

    Messages:
    578
    Hardware:
    RPi3
    Ik heb ergens anders op dit forum iemand gehad ook met dit probleem, het lijkt alsof deze type grabber LOOP device door RPI/Hyperion.NG als een camera gezien wordt.
    Set grabber device0 als een camera in Hyperion en dat loste zijn probleem op! :censored:

    Misschien ziet hij de grabber als een camera omdat dit eigenlijk een apparaat bedoeld is om de video te streamen naar je recording device (RPI).
    Zit er waarschijnlijk dus een iets ander soort GPU/chip in die dat ook aan je RPI terug laat weten. >> ik ben geen USB device0 maar een Camera...
    Nevermind, maar het is wel toevallig dat dit soort 4k LOOP devices regelmatig problemen hebben/maken in Hyperion settings...


    kijk naar je dedbug-log; Set device input to: Camera 1 2021-01-28T16:41:25.162Z [hyperiond V4L2:/DEV/VIDEO0]
     
  18. the1one

    the1one Member

    Messages:
    47
    Bedankt voor de fijne hulp jeroen ga ik zeker proberen. Momenteel draait alles prima o_O. Ik heb alleen een probleem met zwarte balken dan durft het systeem de gabber eruit gooien.
     
  19. the1one

    the1one Member

    Messages:
    47
    Hoi ik nog eens. Ik ga de tread op solved zetten. Heb alleen nog 1 vraagje telkens als er donkere stukken in het scherm komen of zwarte balken dan denkt hyperion dat er geen signaal is. Nu heb hier al veel rond gekeken en ik kom tot de conclusie dat het volgens mij aan de grabber ligt. Ik werk met een onkyo receiver Tx-nr 720. Heeft iemand een voorstel voor een grabber liefst 1 waar ik niet met splitter moet werken.
     
  20. jeroen warmerdam

    jeroen warmerdam Raspberry 3B / APA102 / Hyperion.NG relaisbox

    Messages:
    578
    Hardware:
    RPi3

    staat je blackbar detectie niet te ruim ( teveel frames voordat detectie plaatsvind) en signaal detectie niet "veel te strak" afgesteld?
    dus je black bar wat strakker zetten en je signaal detectie op default Vmin Hmin 0.25 en Vmax Hmax 0.75 juist wat ruimer zetten?
    daar heb ik eigenlijk nooit problemen mee of veranderd.
    Red Green Blue treshold op 15


    dan nog eens testen?