Hello together,
Ive a problem with hyperion. I use a grabber and a hdmi splitter.
If I grab the actual picture, the both black bars (16:9 format) are on the top. The ambilight does not show colors on the top. I think it is because the two black bars on the top.
Here are my settings:
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 0,
"standard" : "NTSC",
"width" : -1,
"height" : -1,
"frameDecimation" : 2,
"sizeDecimation" : 4,
"priority" : 800,
"mode" : "2D",
"cropLeft" : 6,
"cropRight" : 6,
"cropTop" : 10,
"cropBottom" : 8,
"redSignalThreshold" : 0.1,
"greenSignalThreshold" : 0.1,
"blueSignalThreshold" : 0.1
},
// BLACKBORDER CONFIG
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.2,
"unknownFrameCnt" : 600,
"borderFrameCnt" : 50,
"maxInconsistentCnt" : 10,
"blurRemoveCnt" : 1,
"mode" : "default"
},
If I set "cropTop" up to 20 or more the result is the same.
With the setting with "PAL" the black bars are on the top and on the bottom, but the ambilight does not show colors on the top.
Here is a screenshot of the two black bars: https://www.pic-upload.de/view…1.03.111.06.2016.png.html