1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Geen effecten in Hyperion app.

Discussion in 'Dutch Talk' started by Dennis, 16 May 2016.

  1. Dennis

    Dennis New Member

    Messages:
    6
    Hardware:
    RPi3, +Arduino
    Hoi,

    Ik ben bezig met ambilight vie RPI3 en Aruino ik heb bijna alles werkend maar ik krijg geen effecten in mijn Hyperion Android app.
    Colorwheel werkt wel maar zodra ik de effecten selecteer blijft dat leeg.

    Als ik inlog op de RPI3 via WinSCP en het mapje opent van Hyperion en vervolgens die van effects staan er 41 effecten in
    maar zijn niet zichtbaar in de Android app.

    Ben ik soms iets vergeten om te selecteren bij het configureren van de config file van Hypercon?

    Ik hoop dat iemand mij kan helpen hiermee , aangezien ik pas begonnen ben met RPI3 en Arduino.

    Alvast bedankt.

    Dennis
     
  2. Rick164

    Rick164 Administrator Staff Member Administrator

    Messages:
    180
    Hardware:
    RPi2, +Arduino, +AtmoOrb
    Hallo Dennis,

    Het kan zijn dat effecten map niet goed is ingesteld bij HyperCon, het beste is dan om de Hyperion config te posten incl. het log:

    https://hyperion-project.org/wiki/Hyperion-Log

    Met welk Raspberry distributie is dit (Raspbian / OpenElec etc..)?
     
  3. Dennis

    Dennis New Member

    Messages:
    6
    Hardware:
    RPi3, +Arduino
    Hallo Rick,

    Mijn distributie is OpenELEC-RPi2.arm-6.0.3_lightberry.img

    Op een of andere manier krijg ik geen log te zien en loopt Hypercon vast en moet ik hem sluiten doormiddel van taakbeheer.

    Is er een andere manier om die log te krijgen?
     
  4. Rick164

    Rick164 Administrator Staff Member Administrator

    Messages:
    180
    Hardware:
    RPi2, +Arduino, +AtmoOrb
    Het is beste is om dan de Hyperion .json config te posten en dan kunnen we het pad controleren :)
     
  5. Dennis

    Dennis New Member

    Messages:
    6
    Hardware:
    RPi3, +Arduino
    Sorry voor de late reactie,

    Bij deze de sjon config!
     

    Attached Files:

    • Like Like x 1
  6. Dennis

    Dennis New Member

    Messages:
    6
    Hardware:
    RPi3, +Arduino
    En het volgende krijg ik te zien als log:

    SSH Traffic:
    ssh connected
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl stop hyperion 2>/dev/null ; sudo service hyperion stop 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo /sbin/initctl start hyperion 2>/dev/null ; sudo service hyperion start 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
    ssh out: sudo journalctl -u hyperion.service 2>/dev/null
    ssh in: There is no working 'sudo'.
    ssh in:
    ssh in: On debian/ubuntu/all general purpose linux distributions 'sudo'
    ssh in: allows a permitted user to execute a command as the superuser
    ssh in: or another user, as specified by the security policy
    ssh in:
    ssh in: With OpenELEC you have root access by default, so you dont need 'sudo'
     
  7. Rick164

    Rick164 Administrator Staff Member Administrator

    Messages:
    180
    Hardware:
    RPi2, +Arduino, +AtmoOrb
    Fout gevonden en bij HyperCon is zo te zien het verkeerde pad gekozen voor effects, deze stond namelijk op "/opt/hyperion/effects" wat voor o.a. Raspbian is maar niet OpenElec.
    De config aangepast en bijgevoegd dus moet daarmee dan werken :)

    Mocht je ooit opnieuw een config willen maken is het belangrijk dat onderstaande instelling op OpenElec staat:

    hyperCon_effects.JPG
     

    Attached Files:

  8. Dennis

    Dennis New Member

    Messages:
    6
    Hardware:
    RPi3, +Arduino
    Hallo Rick,

    Super bedankt voor je snelle hulp!!!

    Groeten Dennis
     
  9. Brindosch

    Brindosch Administrator Administrator

    Messages:
    672
    Hardware:
    RPi1/Zero, RPi2, RPi3, +nodeMCU/ESP8266
    I thought about to remove this option, Hyperion should search the path out of a given list. (2 paths)
     
    • Agree Agree x 1