1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SOLVED Help needed Hyperion not working if grabber enabled

Discussion in 'Software Support' started by Lew, 21 January 2020.

  1. Lew

    Lew New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    Hi
    I've got Hyperion installed on a Pi 3 with WS2813 using SPI
    It works great using the Hyperion App on the PC or Phone
    However once I enable the grabber it will not work
    This is my config.txt file
    Code:
    # For more options and information see
    # http://rpf.io/configtxt
    # Some settings may impact device functionality. See link above for details
    
    # uncomment if you get no picture on HDMI for a default "safe" mode
    #hdmi_safe=1
    
    # uncomment this if your display has a black border of unused pixels visible
    # and your display can output without overscan
    disable_overscan=1
    
    # uncomment the following to adjust overscan. Use positive numbers if console
    # goes off screen, and negative if there is too much border
    #overscan_left=16
    #overscan_right=16
    #overscan_top=16
    #overscan_bottom=16
    
    # uncomment to force a console size. By default it will be display's size minus
    # overscan.
    #framebuffer_width=1280
    #framebuffer_height=720
    
    # uncomment if hdmi display is not detected and composite is being output
    #hdmi_force_hotplug=1
    
    # uncomment to force a specific HDMI mode (this will force VGA)
    #hdmi_group=1
    #hdmi_mode=1
    
    # uncomment to force a HDMI mode rather than DVI. This can make audio work in
    # DMT (computer monitor) modes
    #hdmi_drive=2
    
    # uncomment to increase signal to HDMI, if you have interference, blanking, or
    # no display
    #config_hdmi_boost=4
    
    # uncomment for composite PAL
    #sdtv_mode=2
    
    #uncomment to overclock the arm. 700 MHz is the default.
    #arm_freq=800
    
    # Uncomment some or all of these to enable the optional hardware interfaces
    #dtparam=i2c_arm=on
    #dtparam=i2s=on
    dtparam=spi=on
    
    # Uncomment this to enable the lirc-rpi module
    #dtoverlay=lirc-rpi
    
    # Additional overlays and parameters are documented /boot/overlays/README
    
    # Enable audio (loads snd_bcm2835)
    dtparam=audio=on
    
    #Usb current
    max_usb_current=1
    enable_uart=0
    core_freq=250
    hdmi_force_hotplug=1
    hdmi_force_edid_audio=1
    And this is my hyperion.config.json file
    Code:
    // Automatically generated configuration file for Hyperion ambilight daemon
    // Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area) 
    // Generated by: HyperCon (The Hyperion deamon configuration file builder)
    // Created with HyperCon V1.03.3 (22.10.2017)
    
    {
        // DEVICE CONFIGURATION 
        "device" :
        {
            "name"       : "MyHyperionConfig",
            "type"       : "ws281x",
            "leds"     : 36,
            "colorOrder" : "grb"
        },
    
        // COLOR CALIBRATION CONFIG
        "color" :
        {
            "channelAdjustment" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "pureRed" :
                    {
                        "redChannel"        : 255,
                        "greenChannel"        : 0,
                        "blueChannel"        : 0
                    },
                    "pureGreen" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 255,
                        "blueChannel"        : 0
                    },
                    "pureBlue" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 0,
                        "blueChannel"        : 255
                    }
                }
            ],
            "temperature" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "correctionValues" :
                    {
                        "red"     : 255,
                        "green"    : 255,
                        "blue"     : 255
                    }
                }
            ],
            "transform" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "hsl" :
                    {
                        "saturationGain"    : 1.0500,
                        "luminanceGain"        : 1.0500,
                        "luminanceMinimum"        : 0.0000
                    },
                    "red" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"        : 2.5000
                    },
                    "green" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"        : 2.5000
                    },
                    "blue" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"        : 2.5000
                    }
                }
            ],
        // SMOOTHING CONFIG
            "smoothing" :
            {
                "type"            : "linear",
                "time_ms"         : 100,
                "updateFrequency" : 30.0000,
                "updateDelay"     : 0
            }
        },
    
        // V4L2 GRABBER CONFIG
        "grabber-v4l2" : 
        {
            "device" : "/dev/video0",
            "input" : 0,
            "standard" : "PAL",
            "width" : 640,
            "height" : 480,
            "frameDecimation" : 2,
            "sizeDecimation" : 8,
            "priority" : 900,
            "mode" : "2D",
            "cropLeft" : 8,
            "cropRight" : 8,
            "cropTop" : 8,
            "cropBottom" : 8,
            "redSignalThreshold" : 0.0,
            "greenSignalThreshold" : 0.0,
            "blueSignalThreshold" : 0.0
        },
    
        // BOOTEFFECT CONFIG
        "bootsequence" : 
        {
            "color" : [0,0,0],
            "effect" : "Rainbow swirl fast",
            "duration_ms" : 3000,
            "priority" : 700
        },
    
        // JSON SERVER CONFIG
        "jsonServer" : 
        {
            "port" : 19444
        },
    
        // PROTO SERVER CONFIG
        "protoServer" : 
        {
            "port" : 19445
        },
    
        // BOBLIGHT SERVER CONFIG
        "boblightServer" : 
        {
            "port" : 19333,
            "priority" : 900
        },
    
        // EFFECT PATH
        "effects" : 
        {
            "paths" : 
            [
                "/storage/hyperion/effects",
                "/usr/share/hyperion/effects"
            ]
        },
    
        // NO FRAME GRABBER CONFIG
        // NO BLACKBORDER CONFIG
        // NO KODI CHECK CONFIG
        // NO JSON/PROTO FORWARD CONFIG
    
        // LED CONFIGURATION
        "leds" : 
        [
            {
                "index" : 0,
                "hscan" : { "minimum" : 0.0096, "maximum" : 0.0512 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 1,
                "hscan" : { "minimum" : 0.0100, "maximum" : 0.0300 },
                "vscan" : { "minimum" : 0.0084, "maximum" : 0.1750 }
            },
            {
                "index" : 2,
                "hscan" : { "minimum" : 0.0100, "maximum" : 0.0300 },
                "vscan" : { "minimum" : 0.1717, "maximum" : 0.3383 }
            },
            {
                "index" : 3,
                "hscan" : { "minimum" : 0.0100, "maximum" : 0.0300 },
                "vscan" : { "minimum" : 0.3350, "maximum" : 0.5016 }
            },
            {
                "index" : 4,
                "hscan" : { "minimum" : 0.0100, "maximum" : 0.0300 },
                "vscan" : { "minimum" : 0.4984, "maximum" : 0.6650 }
            },
            {
                "index" : 5,
                "hscan" : { "minimum" : 0.0100, "maximum" : 0.0300 },
                "vscan" : { "minimum" : 0.6617, "maximum" : 0.8283 }
            },
            {
                "index" : 6,
                "hscan" : { "minimum" : 0.0100, "maximum" : 0.0300 },
                "vscan" : { "minimum" : 0.8250, "maximum" : 0.9916 }
            },
            {
                "index" : 7,
                "hscan" : { "minimum" : 0.0096, "maximum" : 0.0512 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 8,
                "hscan" : { "minimum" : 0.0504, "maximum" : 0.0921 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 9,
                "hscan" : { "minimum" : 0.0913, "maximum" : 0.1329 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 10,
                "hscan" : { "minimum" : 0.1321, "maximum" : 0.1737 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 11,
                "hscan" : { "minimum" : 0.1729, "maximum" : 0.2146 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 12,
                "hscan" : { "minimum" : 0.2138, "maximum" : 0.2554 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 13,
                "hscan" : { "minimum" : 0.2546, "maximum" : 0.2962 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 14,
                "hscan" : { "minimum" : 0.2954, "maximum" : 0.3371 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 15,
                "hscan" : { "minimum" : 0.3363, "maximum" : 0.3779 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 16,
                "hscan" : { "minimum" : 0.3771, "maximum" : 0.4187 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 17,
                "hscan" : { "minimum" : 0.4179, "maximum" : 0.4596 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 18,
                "hscan" : { "minimum" : 0.4588, "maximum" : 0.5004 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 19,
                "hscan" : { "minimum" : 0.4996, "maximum" : 0.5412 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 20,
                "hscan" : { "minimum" : 0.5404, "maximum" : 0.5821 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 21,
                "hscan" : { "minimum" : 0.5813, "maximum" : 0.6229 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 22,
                "hscan" : { "minimum" : 0.6221, "maximum" : 0.6637 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 23,
                "hscan" : { "minimum" : 0.6629, "maximum" : 0.7046 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 24,
                "hscan" : { "minimum" : 0.7038, "maximum" : 0.7454 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 25,
                "hscan" : { "minimum" : 0.7446, "maximum" : 0.7862 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 26,
                "hscan" : { "minimum" : 0.7854, "maximum" : 0.8271 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 27,
                "hscan" : { "minimum" : 0.8263, "maximum" : 0.8679 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 28,
                "hscan" : { "minimum" : 0.8671, "maximum" : 0.9087 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 29,
                "hscan" : { "minimum" : 0.9079, "maximum" : 0.9496 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 30,
                "hscan" : { "minimum" : 0.9488, "maximum" : 0.9904 },
                "vscan" : { "minimum" : 0.9700, "maximum" : 0.9900 }
            },
            {
                "index" : 31,
                "hscan" : { "minimum" : 0.9700, "maximum" : 0.9900 },
                "vscan" : { "minimum" : 0.8250, "maximum" : 0.9916 }
            },
            {
                "index" : 32,
                "hscan" : { "minimum" : 0.9700, "maximum" : 0.9900 },
                "vscan" : { "minimum" : 0.6617, "maximum" : 0.8283 }
            },
            {
                "index" : 33,
                "hscan" : { "minimum" : 0.9700, "maximum" : 0.9900 },
                "vscan" : { "minimum" : 0.4984, "maximum" : 0.6650 }
            },
            {
                "index" : 34,
                "hscan" : { "minimum" : 0.9700, "maximum" : 0.9900 },
                "vscan" : { "minimum" : 0.3350, "maximum" : 0.5016 }
            },
            {
                "index" : 35,
                "hscan" : { "minimum" : 0.9700, "maximum" : 0.9900 },
                "vscan" : { "minimum" : 0.1717, "maximum" : 0.3383 }
            },
            {
                "index" : 36,
                "hscan" : { "minimum" : 0.9700, "maximum" : 0.9900 },
                "vscan" : { "minimum" : 0.0084, "maximum" : 0.1750 }
            },
            {
                "index" : 37,
                "hscan" : { "minimum" : 0.9488, "maximum" : 0.9904 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 38,
                "hscan" : { "minimum" : 0.9079, "maximum" : 0.9496 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 39,
                "hscan" : { "minimum" : 0.8671, "maximum" : 0.9087 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 40,
                "hscan" : { "minimum" : 0.8263, "maximum" : 0.8679 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 41,
                "hscan" : { "minimum" : 0.7854, "maximum" : 0.8271 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 42,
                "hscan" : { "minimum" : 0.7446, "maximum" : 0.7862 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 43,
                "hscan" : { "minimum" : 0.7038, "maximum" : 0.7454 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 44,
                "hscan" : { "minimum" : 0.6629, "maximum" : 0.7046 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 45,
                "hscan" : { "minimum" : 0.6221, "maximum" : 0.6637 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 46,
                "hscan" : { "minimum" : 0.5813, "maximum" : 0.6229 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 47,
                "hscan" : { "minimum" : 0.5404, "maximum" : 0.5821 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 48,
                "hscan" : { "minimum" : 0.4996, "maximum" : 0.5412 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 49,
                "hscan" : { "minimum" : 0.4588, "maximum" : 0.5004 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 50,
                "hscan" : { "minimum" : 0.4179, "maximum" : 0.4596 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 51,
                "hscan" : { "minimum" : 0.3771, "maximum" : 0.4187 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 52,
                "hscan" : { "minimum" : 0.3363, "maximum" : 0.3779 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 53,
                "hscan" : { "minimum" : 0.2954, "maximum" : 0.3371 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 54,
                "hscan" : { "minimum" : 0.2546, "maximum" : 0.2962 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 55,
                "hscan" : { "minimum" : 0.2138, "maximum" : 0.2554 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 56,
                "hscan" : { "minimum" : 0.1729, "maximum" : 0.2146 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 57,
                "hscan" : { "minimum" : 0.1321, "maximum" : 0.1737 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 58,
                "hscan" : { "minimum" : 0.0913, "maximum" : 0.1329 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            },
            {
                "index" : 59,
                "hscan" : { "minimum" : 0.0504, "maximum" : 0.0921 },
                "vscan" : { "minimum" : 0.0100, "maximum" : 0.0300 }
            }
        ],
    
        "endOfJson" : "endOfJson"
    }
    I've only got 36 led's connected at the moment to test untill I know it's working then once it is I'll connect it to the full amount on LED's on the back of the TV
     
  2. Akriss

    Akriss Active Member

    Messages:
    544
    Hardware:
    RPi1/Zero, RPi2, RPi3, 32/64bit, +Arduino, +nodeMCU/ESP8266
    What type of grabber?
    Look like a usb type from how the config is setup. Correct?
    A utv007 chipset or STK1160 chipset ?

    Any logs to show whats happening would help as well.
     
  3. Lew

    Lew New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    Yes it's a UTV007 chipset
    but
    I get the same results even when the grabber is not attached to the Pi
    How do I get logs?
     
  4. Akriss

    Akriss Active Member

    Messages:
    544
    Hardware:
    RPi1/Zero, RPi2, RPi3, 32/64bit, +Arduino, +nodeMCU/ESP8266
  5. Lew

    Lew New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    Log without grabber enabled and the LED's working
    Code:
    SSH Traffic:
    ssh connected
    sftp Send Hyperion Config - Sourcepath: C:/Users/lew24/OneDrive/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo journalctl -u hyperion.service 2>/dev/null
    ssh in:     -- Logs begin at Tue 2020-01-21 20:17:01 GMT, end at Wed 2020-01-22 10:54:48 GMT. --
    ssh in:     Jan 21 20:17:04 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: Hyperion Ambilight Deamon (318)
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: {
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "leds" : 36,
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: }
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: started
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 1.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: Hyperion Ambilight Deamon (454)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: {
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "leds" : 36,
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: }
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: started
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 2.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: Hyperion Ambilight Deamon (515)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: {
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "leds" : 36,
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: }
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: started
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 3.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: Hyperion Ambilight Deamon (736)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: {
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "leds" : 36,
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: }
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: started
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 4.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: Hyperion Ambilight Deamon (744)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: {
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "leds" : 36,
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: }
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: started
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 5.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Start request repeated too quickly.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Jan 22 10:54:43 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: Hyperion Ambilight Deamon (1582)
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: {
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "leds" : 256,
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "type" : "ws281x"
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: }
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: whiteAlgorithm ::
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: started
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:54:46 raspberrypi hyperiond[1582]: INFO: Application closed with code 0
    ssh in:     Jan 22 10:54:46 raspberrypi hyperiond[1582]: EFFECTENGINE INFO: Cleaning up Python interpreter
    ssh in:     Jan 22 10:54:46 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Jan 22 10:54:46 raspberrypi hyperiond[1582]: Shutdown WS281x PWM and DMA channel
    ssh in:     Jan 22 10:54:46 raspberrypi systemd[1]: hyperion.service: Succeeded.
    ssh in:     Jan 22 10:54:46 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    
    
    Log with Grabber enabled
    Code:
    SSH Traffic:
    ssh connected
    sftp Send Hyperion Config - Sourcepath: C:/Users/lew24/OneDrive/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo journalctl -u hyperion.service 2>/dev/null
    ssh in:     -- Logs begin at Tue 2020-01-21 20:17:01 GMT, end at Wed 2020-01-22 10:54:48 GMT. --
    ssh in:     Jan 21 20:17:04 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: Hyperion Ambilight Deamon (318)
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: {
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "leds" : 36,
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: }
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: started
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 1.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: Hyperion Ambilight Deamon (454)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: {
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "leds" : 36,
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: }
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: started
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 2.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: Hyperion Ambilight Deamon (515)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: {
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "leds" : 36,
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: }
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: started
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 3.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: Hyperion Ambilight Deamon (736)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: {
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "leds" : 36,
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: }
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: started
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 4.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: Hyperion Ambilight Deamon (744)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: {
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "leds" : 36,
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: }
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: started
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 5.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Start request repeated too quickly.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Jan 22 10:54:43 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: Hyperion Ambilight Deamon (1582)
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: {
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "leds" : 256,
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "type" : "ws281x"
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: }
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: whiteAlgorithm ::
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: started
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:54:46 raspberrypi hyperiond[1582]: INFO: Application closed with code 0
    ssh in:     Jan 22 10:54:46 raspberrypi hyperiond[1582]: EFFECTENGINE INFO: Cleaning up Python interpreter
    ssh in:     Jan 22 10:54:46 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Jan 22 10:54:46 raspberrypi hyperiond[1582]: Shutdown WS281x PWM and DMA channel
    ssh in:     Jan 22 10:54:46 raspberrypi systemd[1]: hyperion.service: Succeeded.
    ssh in:     Jan 22 10:54:46 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    sftp Send Hyperion Config - Sourcepath: C:/Users/lew24/OneDrive/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    sftp Send Hyperion Config - Sourcepath: C:/Users/lew24/OneDrive/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo journalctl -u hyperion.service 2>/dev/null
    ssh in:     -- Logs begin at Tue 2020-01-21 20:17:01 GMT, end at Wed 2020-01-22 10:59:38 GMT. --
    ssh in:     Jan 21 20:17:04 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: Hyperion Ambilight Deamon (318)
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: {
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "leds" : 36,
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: }
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:06 raspberrypi hyperiond[318]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: started
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[318]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 1.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: Hyperion Ambilight Deamon (454)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: {
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "leds" : 36,
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: }
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: started
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[454]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 2.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: Hyperion Ambilight Deamon (515)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: {
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "leds" : 36,
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: }
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: started
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:07 raspberrypi hyperiond[515]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:07 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 3.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: Hyperion Ambilight Deamon (736)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: {
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "leds" : 36,
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: }
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: started
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[736]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 4.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: Hyperion Ambilight Deamon (744)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: {
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "colorOrder" : "grb",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "leds" : 36,
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:         "type" : "ws281x"
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: }
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: whiteAlgorithm ::
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Creating linear smoothing
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Hyperion started and initialised
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: started
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Json server created and started on port 19444
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 21 20:17:08 raspberrypi hyperiond[744]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 21 20:17:08 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 5.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Start request repeated too quickly.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 21 20:17:09 raspberrypi systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Jan 22 10:54:43 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: Hyperion Ambilight Deamon (1582)
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: {
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "leds" : 256,
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]:         "type" : "ws281x"
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: }
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: whiteAlgorithm ::
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: started
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:54:44 raspberrypi hyperiond[1582]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:54:46 raspberrypi hyperiond[1582]: INFO: Application closed with code 0
    ssh in:     Jan 22 10:54:46 raspberrypi hyperiond[1582]: EFFECTENGINE INFO: Cleaning up Python interpreter
    ssh in:     Jan 22 10:54:46 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Jan 22 10:54:46 raspberrypi hyperiond[1582]: Shutdown WS281x PWM and DMA channel
    ssh in:     Jan 22 10:54:46 raspberrypi systemd[1]: hyperion.service: Succeeded.
    ssh in:     Jan 22 10:54:46 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: Hyperion Ambilight Deamon (1823)
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: {
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]:         "leds" : 256,
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]:         "type" : "ws281x"
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: }
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: whiteAlgorithm ::
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: started
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1823]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 1.
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: Hyperion Ambilight Deamon (1835)
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: {
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]:         "leds" : 256,
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]:         "type" : "ws281x"
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: }
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: whiteAlgorithm ::
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: started
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 22 10:59:23 raspberrypi hyperiond[1835]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:23 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 22 10:59:24 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: Hyperion Ambilight Deamon (1860)
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: {
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]:         "leds" : 256,
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]:         "type" : "ws281x"
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: }
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: whiteAlgorithm ::
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: started
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1860]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 22 10:59:24 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 22 10:59:24 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:24 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 22 10:59:24 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 2.
    ssh in:     Jan 22 10:59:24 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 22 10:59:24 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1871]: Hyperion Ambilight Deamon (1871)
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1871]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:59:24 raspberrypi hyperiond[1871]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: {
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]:         "leds" : 256,
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]:         "type" : "ws281x"
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: }
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: whiteAlgorithm ::
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: started
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1871]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 3.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: Hyperion Ambilight Deamon (1874)
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: {
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]:         "leds" : 256,
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]:         "type" : "ws281x"
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: }
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: whiteAlgorithm ::
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: started
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 22 10:59:25 raspberrypi hyperiond[1874]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 4.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Start request repeated too quickly.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:25 raspberrypi systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Jan 22 10:59:32 raspberrypi systemd[1]: hyperion.service: Start request repeated too quickly.
    ssh in:     Jan 22 10:59:32 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:32 raspberrypi systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Jan 22 10:59:37 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: Hyperion Ambilight Deamon (1942)
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: {
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]:         "leds" : 256,
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]:         "type" : "ws281x"
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: }
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: whiteAlgorithm ::
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: started
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1942]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 22 10:59:37 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 22 10:59:37 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:37 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 22 10:59:37 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 1.
    ssh in:     Jan 22 10:59:37 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 22 10:59:37 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1953]: Hyperion Ambilight Deamon (1953)
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1953]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:59:37 raspberrypi hyperiond[1953]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: {
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]:         "leds" : 256,
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]:         "type" : "ws281x"
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: }
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: whiteAlgorithm ::
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: started
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1953]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 2.
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: Hyperion Ambilight Deamon (1955)
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: {
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]:         "leds" : 256,
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]:         "type" : "ws281x"
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: }
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: whiteAlgorithm ::
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: INFO: Hyperion started and initialised
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: BLACKBORDER INFO: mode:default
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: started
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: INFO: Json server created and started on port 19444
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: INFO: Proto server created and started on port 19445
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: INFO: Boblight server created and started on port 19333
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1955]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 3.
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Jan 22 10:59:38 raspberrypi systemd[1]: Started Hyperion Systemd service.
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: Hyperion Ambilight Deamon (1959)
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]:         Version   : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]:         Build Time: Aug 25 2019 10:39:29
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: HYPERION INFO: ColorTransform 'default' => [0; 59]
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: LEDDEVICE INFO: configuration:
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: {
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]:         "colorOrder" : "grb",
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]:         "leds" : 256,
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]:         "name" : "MyHyperionConfig",
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]:         "type" : "ws281x"
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: }
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: whiteAlgorithm ::
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: INFO: Creating linear smoothing
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=100;updateDelay=0
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Jan 22 10:59:38 raspberrypi hyperiond[1959]: EFFECTENGINE INFO: Initializing Python interpreter
    
     
  6. Lew

    Lew New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    If I try and set the colour after the grabber is enabled I get this
    ssh out: hyperion-remote -c ff3f2f
    ssh in: hyperion-remote:
    ssh in: version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in: build time: Aug 25 2019 10:39:08
    ssh out: Unable to connect to host

    If I disable the grabber and do exactly the same I get this
    ssh out: hyperion-remote -c ff3f2f
    ssh in: hyperion-remote:
    ssh in: version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in: build time: Aug 25 2019 10:39:08
    ssh in: Connected to localhost:19444
    ssh in: Set color to 255 63 47
     
  7. Akriss

    Akriss Active Member

    Messages:
    544
    Hardware:
    RPi1/Zero, RPi2, RPi3, 32/64bit, +Arduino, +nodeMCU/ESP8266
  8. Lew

    Lew New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    The driver works already, if I disable the grabber in Hypercon.jar and upload it the led's work perfectly, I can change colours, strobe or do anything
    It's only once the grabber box is ticked in Hypercon.jar and the config uploaded that it will not work
     
  9. Akriss

    Akriss Active Member

    Messages:
    544
    Hardware:
    RPi1/Zero, RPi2, RPi3, 32/64bit, +Arduino, +nodeMCU/ESP8266
  10. Lew

    Lew New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi3, +Arduino
  11. Akriss

    Akriss Active Member

    Messages:
    544
    Hardware:
    RPi1/Zero, RPi2, RPi3, 32/64bit, +Arduino, +nodeMCU/ESP8266
    Are you sure the grabber is a utv007 chipset?

    This error usually comes from other chipsets.

    Enter
    Code:
    lsusb
    on the command prompt on the Pi with the grabber plugged in to glean useful info, and post results.

    There should be a result that look like "Bus 001 Device 005: ID 1b71:3002 Fushicai USBTV007 Video Grabber [EasyCAP]"
     
  12. Lew

    Lew New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    I've come back to this because as guessed correctly by a couple of people the grabber was indeed the wrong chipset.
    I spent ages trying to get one and I now have 2 grabbers
    The 1st grabber is Bus 001 Device 006: ID 1b71:3002 Fushicai USBTV007 Video Grabber [EasyCAP]
    The 2nd grabber is Bus 001 Device 004: ID 05e1:0408 Syntek Semiconductor Co., Ltd STK1160 Video Cap

    Both grabbers are now giving me exactly the same problems albeit different from the original post
    The is a problem with the last 8 led's on the bottom of the TV but I think this is a physical problem so until I can get some more I have disabled the horizontal LED's on the bottom

    The colours of the LED's work perfectly from the colour picker in Hyperion and by using the Hyperion app on my phone, it starts and runs perfectly but the colours are out when using the grabber
    You will see why below

    Neither grabber will grab the screen correctly
    I'll show you in the following pictures
    This image shows both the TV and the computer screen showing the grabbed picture
    [​IMG]

    This is the image of the TV
    [​IMG]

    This is the image of the grabber on the computer
    [​IMG]

    This is my config
    and This is my Log
    Anyone got any suggestions?
     
  13. Akriss

    Akriss Active Member

    Messages:
    544
    Hardware:
    RPi1/Zero, RPi2, RPi3, 32/64bit, +Arduino, +nodeMCU/ESP8266
    Is you broadcast region PAL or NTSC?

    It looks kinda like a mismatch.
    In hyperion.config is the line to change if needed.
    Code:
    "standard" : "PAL",
    And there is a switch on the hdmi to av converter for PAL/NTSC. Some converters have the switch label reversed. So keep that in mind as well.

    Hope its of help.
     
  14. Lew

    Lew New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    Unfortunately it’s not this, I’m In England and we use Pal.
    I actually tried switching it to NTSC before I posted and it made the picture way worse.

    i know the decimation is set to 8 and 2, I also tried various combinations from 0 to 32 and it made little difference
     
  15. Akriss

    Akriss Active Member

    Messages:
    544
    Hardware:
    RPi1/Zero, RPi2, RPi3, 32/64bit, +Arduino, +nodeMCU/ESP8266
    Going by this:
    It may be the hdmi to av converter causing the problem.

    Try plugging the usb capture in something that outputs video to RCA av. Any old vcr, video cam recorder or a game console would work. And see the how it looks.

    Hope its of help.
     
  16. Lew

    Lew New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    You found the problem
    The issue I had was - I was using a 10bit UHD signal into the hdmi splitter to 1080 converter and then into the grabber
    I started with a 576P signal from my Satellite box, this worked perfectly and I then increased the resolution in stages until it went pixelated again
    This is UHD 8 bit if I use 10bit it then pixellated again but I'm hapopy with this
    [​IMG]
    Thanks for the help :)