1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SOLVED Hyperion.ng + WLED no grabbed signal for few seconds

Discussion in 'Software Support' started by Bub4, 16 December 2020.

  1. Bub4

    Bub4 Active Member

    Messages:
    128
    Hardware:
    RPi1/Zero, RPi3, +Arduino, +nodeMCU/ESP8266
    Hi,
    I have a strange behaviour which occurs on a regular basis every day but randomly timed:
    Hyperion suddenly stops and all LEDs shine in the WLED configured colours for a few seconds (both instances). Then hyperion takes over again with the grabbed video information and all is back to normal.

    Here is the debug log:

    Code:
     2020-12-14T18:49:35.507Z [hyperiond DAEMON] (INFO) CEC handler created
    2020-12-14T18:49:35.510Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
    2020-12-14T18:49:35.512Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
    2020-12-14T18:49:35.512Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /storage/hyperion/custom-effects
    2020-12-14T18:49:35.522Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
    2020-12-14T18:49:35.523Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
    2020-12-14T18:49:35.523Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
    2020-12-14T18:49:35.550Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
    2020-12-14T18:49:35.551Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
    2020-12-14T18:49:35.551Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
    2020-12-14T18:49:35.561Z [hyperiond DAEMON] (INFO) set screen capture device to 'x11'
    2020-12-14T18:49:35.561Z [hyperiond X11GRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
    2020-12-14T18:49:35.561Z [hyperiond DAEMON] (INFO) X11 grabber created
    2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
    2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (INFO) Signal threshold set to: {12, 12, 12}
    2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (INFO) CEC detection is now disabled
    2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (INFO) Signal detection is now disabled
    2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
    2020-12-14T18:49:35.561Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
    2020-12-14T18:49:35.562Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
    2020-12-14T18:49:35.563Z [hyperiond JSONSERVER] (INFO) Started on port 19444
    2020-12-14T18:49:35.544Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'.
    2020-12-14T18:49:35.546Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init())
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":108,"hardwareLedCount":108,"host":"192.168.178.41","latchTime":0,"type":"wled"}]
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType   : wled
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount     : 108
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder   : rgb
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime    : 0
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI())
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1]
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":108,"hardwareLedCount":108,"host":"192.168.178.41","latchTime":0,"port":19446,"type":"wled"}]
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.178.41 as an IP-address.
    2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.178.41:19446
    2020-12-14T18:49:35.548Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP  : 192.168.178.41
    2020-12-14T18:49:35.548Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port         : 19446
    2020-12-14T18:49:35.548Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
    2020-12-14T18:49:35.544Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
    2020-12-14T18:49:35.548Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 280 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 50 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 140.000000 ms
    2020-12-14T18:49:35.548Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
    2020-12-14T18:49:35.548Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
    2020-12-14T18:49:35.549Z [hyperiond EFFECTENGINE] (INFO) Run effect "Knight rider" on channel 0
    2020-12-14T18:49:35.549Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Knight rider], smoothCfg [2]
    2020-12-14T18:49:35.549Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
    2020-12-14T18:49:35.549Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Knight rider' started
    2020-12-14T18:49:35.549Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
    2020-12-14T18:49:35.549Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
    2020-12-14T18:49:35.550Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
    2020-12-14T18:49:35.571Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
    2020-12-14T18:49:35.550Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
    2020-12-14T18:49:35.550Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.178.41/json/state] [{"on":true}]
    2020-12-14T18:49:35.562Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
    2020-12-14T18:49:35.562Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 280 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 50 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 140.000000 ms
    2020-12-14T18:49:35.562Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
    2020-12-14T18:49:35.562Z [hyperiond EFFECTENGINE] (INFO) Run effect "Knight rider" on channel 0
    2020-12-14T18:49:35.562Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Knight rider], smoothCfg [2]
    2020-12-14T18:49:35.562Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
    2020-12-14T18:49:35.562Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Knight rider' started
    2020-12-14T18:49:35.563Z [hyperiond EFFECTENGINE] (INFO) Run effect "Warm mood blobs" on channel 254
    2020-12-14T18:49:35.563Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Warm mood blobs], smoothCfg [2]
    2020-12-14T18:49:35.563Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive
    2020-12-14T18:49:35.563Z [hyperiond HYPERION] (INFO) Initial background effect 'Warm mood blobs' started
    2020-12-14T18:49:35.563Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
    2020-12-14T18:49:35.563Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
    2020-12-14T18:49:35.571Z [hyperiond X11] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
    2020-12-14T18:49:35.563Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
    2020-12-14T18:49:35.571Z [hyperiond HYPERION] (INFO) Hyperion instance 'QMedia' has been started
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'.
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init())
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":89,"hardwareLedCount":89,"host":"192.168.178.54","latchTime":0,"type":"wled"}]
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType   : wled
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount     : 89
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder   : rgb
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime    : 0
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI())
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1]
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":89,"hardwareLedCount":89,"host":"192.168.178.54","latchTime":0,"port":19446,"type":"wled"}]
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.178.54 as an IP-address.
    2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.178.54:19446
    2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP  : 192.168.178.54
    2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port         : 19446
    2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
    2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
    2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.178.54/json/state] [{"on":true}]
    2020-12-14T18:49:35.570Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
    2020-12-14T18:49:35.571Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
    2020-12-14T18:49:35.572Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
    2020-12-14T18:49:35.578Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
    2020-12-14T18:49:35.610Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
    2020-12-14T18:49:35.610Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
    2020-12-14T18:49:35.610Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
    2020-12-14T18:49:35.611Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
    2020-12-14T18:49:35.611Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
    2020-12-14T18:49:35.611Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
    2020-12-14T18:49:35.612Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
    2020-12-14T18:49:35.612Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
    2020-12-14T18:49:35.620Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
    2020-12-14T18:49:35.620Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
    2020-12-14T18:49:35.620Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
    2020-12-14T18:49:35.620Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
    2020-12-14T18:49:35.621Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
    2020-12-14T18:49:35.621Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.178.41/json/state] [{"on":true}]
    2020-12-14T18:49:35.639Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
    2020-12-14T18:49:35.639Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
    2020-12-14T18:49:35.639Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
    2020-12-14T18:49:35.639Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
    2020-12-14T18:49:35.639Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
    2020-12-14T18:49:35.639Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.178.54/json/state] [{"on":true}]
    2020-12-14T18:49:35.657Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:207:setInput()) Priority 254 is now active
    2020-12-14T18:49:35.667Z [hyperiond X11GRABBER] (INFO) Update of screen resolution: [0x0]  to [1920x1080]
    2020-12-14T18:49:35.667Z [hyperiond X11GRABBER] (INFO) Using XRender for grabbing
    2020-12-14T18:49:35.667Z [hyperiond X11GRABBER] (INFO) Update output image resolution: [0x0]  to [240x135]
    2020-12-14T18:49:35.667Z [hyperiond X11GRABBER] (INFO) Capture interface is now enabled
    2020-12-14T18:49:35.669Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 250 is now active
    2020-12-14T18:49:35.669Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 250 is now active
    2020-12-14T18:49:36.494Z [hyperiond X11GRABBER] (INFO) Update of screen resolution: [1920x1080]  to [1920x1080]
    2020-12-14T18:49:36.494Z [hyperiond X11GRABBER] (INFO) Using XRender for grabbing
    2020-12-14T18:49:36.494Z [hyperiond X11GRABBER] (INFO) Update output image resolution: [240x135]  to [240x135]
    2020-12-14T18:49:38.071Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
    2020-12-14T18:49:38.072Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
    2020-12-14T18:49:38.072Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
    2020-12-14T18:49:38.109Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
    2020-12-14T18:49:38.110Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
    2020-12-14T18:49:38.110Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
    2020-12-14T18:49:40.657Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
    2020-12-14T18:49:40.657Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
    2020-12-14T18:49:40.658Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 280 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 50 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 140.000000 ms
    2020-12-14T18:49:40.658Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
    2020-12-14T18:49:40.658Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
    2020-12-14T18:49:40.658Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
    2020-12-14T18:49:40.658Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 280 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 50 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 140.000000 ms
    2020-12-14T18:49:40.659Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
    2020-12-14T18:49:40.907Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 250
    2020-12-14T18:49:40.908Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 250
    2020-12-14T18:49:40.908Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[250], previousPriority[0]
    2020-12-14T18:49:40.909Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[250], previousPriority[0]
    2020-12-14T19:39:26.983Z [hyperiond X11GRABBER] (INFO) Update of screen resolution: [1920x1080]  to [1920x1080]
    2020-12-14T19:39:26.983Z [hyperiond X11GRABBER] (INFO) Using XRender for grabbing
    2020-12-14T19:39:26.983Z [hyperiond X11GRABBER] (INFO) Update output image resolution: [240x135]  to [240x135]
    2020-12-14T19:39:30.885Z [hyperiond X11GRABBER] (INFO) Update of screen resolution: [1920x1080]  to [1920x1080]
    2020-12-14T19:39:30.885Z [hyperiond X11GRABBER] (INFO) Using XRender for grabbing
    2020-12-14T19:39:30.886Z [hyperiond X11GRABBER] (INFO) Update output image resolution: [240x135]  to [240x135]
    2020-12-14T20:54:46.528Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.51
    2020-12-14T20:54:46.528Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.51' switch to Hyperion instance 0
    2020-12-14T20:54:50.179Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.51
    It occurred on 20:54 but I can't seem to find anything strange in the logs.

    System
    LibreELEC (official): 9.2.6 (Generic.x86_64)
    Hyperion.ng alpha9 - Plattform grabber
    WLED build 2008310

    The WLED WiFi connection is stable with an uptime of >10 days

    Does anyone have an idea?

    Thanks
     
  2. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    455
    Hardware:
    RPi3, 32/64bit
    We jointly worked with the WLED team to have here a better integration in upcoming WLED/Hyperion releases, see https://github.com/Aircoookie/WLED/issues/1308
    In the meantime you might want to change the WLED sync timeout to the maximum value (in the WLED sync config UI)

    [​IMG]

    WLED turns to default, if no data is received because of no updates received from hyperion.
    Setting the WLED timeout to maximum, will reduce the likelihood of having this happinging.
     
    • Like Like x 1
    • Thank you Thank you x 1
  3. Bub4

    Bub4 Active Member

    Messages:
    128
    Hardware:
    RPi1/Zero, RPi3, +Arduino, +nodeMCU/ESP8266
    Thank you very much! appreciate it.
    I will apply this and update the experience
     
  4. Bub4

    Bub4 Active Member

    Messages:
    128
    Hardware:
    RPi1/Zero, RPi3, +Arduino, +nodeMCU/ESP8266
    Thank again @Lord-Grey -> so far no issues anymore. Works very nice and stable (hyperion.ng overall!!)