hallo leute,
ich habe es mittlerweile geschafft mir mein ambilight zu bauen. allerdings habe ich (wie ich finde) komische farbwerte um ein vernünftiges weiß zu bekommen. außerdem habe ich probleme mit den grauwerten:
wenn ich zb.: (grau= 3F3F3F
von weiß auf grau wechsel ist alles gut.
wenn ich aber von schwarz, also aus, auf grau wechsel bekomme ich einen grünstich.
von rot auf grau > gelbstich
von blau auf grau > cyanstich
die farben selber sind sonst eigentlich ziemlich gut, nur die graustufen sind ...naja...speziell.
ach ja...beim wechsel von weiß auf schwarz, "fadet" es von grün > aus...was wohl auch an den farbwerten liegt. -.-
hier mal meine config:
Code
// Automatically generated configuration file for Hyperion ambilight daemon
// Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.03.1 (11.06.2016)
{
// DEVICE CONFIGURATION
"device" :
{
"name" : "MyHyperionConfig",
"type" : "ws2801",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"colorOrder" : "rbg"
},
// COLOR CALIBRATION CONFIG
"color" :
{
"channelAdjustment" :
[
{
"id" : "default",
"leds" : "*",
"pureRed" :
{
"redChannel" : 42,
"greenChannel" : 0,
"blueChannel" : 0
},
"pureGreen" :
{
"redChannel" : 0,
"greenChannel" : 255,
"blueChannel" : 0
},
"pureBlue" :
{
"redChannel" : 0,
"greenChannel" : 0,
"blueChannel" : 38
}
}
],
"temperature" :
[
{
"id" : "default",
"leds" : "*",
"correctionValues" :
{
"red" : 255,
"green" : 255,
"blue" : 255
}
}
],
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsl" :
{
"saturationGain" : 5.0000,
"luminanceGain" : 1.5000,
"luminanceMinimum" : 0.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
}
}
],
// SMOOTHING CONFIG
"smoothing" :
{
"type" : "linear",
"time_ms" : 275,
"updateFrequency" : 25.0000,
"updateDelay" : 0
}
},
// NO V4L2 GRABBER CONFIG
// FRAME GRABBER CONFIG
"framegrabber" :
{
"width" : 64,
"height" : 64,
"frequency_Hz" : 10.0,
"priority" : 890
},
// BLACKBORDER CONFIG
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.01,
"unknownFrameCnt" : 600,
"borderFrameCnt" : 50,
"maxInconsistentCnt" : 10,
"blurRemoveCnt" : 1,
"mode" : "default"
},
Alles anzeigen
hoffe ihr könnt mir dabei helfen
MfG
Doncamillo