1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LED's leuchten nur im undefnierten Zustand

Discussion in 'German Talk' started by Fabsi, 5 May 2020.

  1. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    Hallo zusammen ich hoffe in diesem Forum kann mir geholfen werden. Ich habe schon bei ein paar Einträgen mitgelesen, leider waren diese alle nicht die Lösung. Zu meinem Problem:

    Ich habe eine Raspberry Pi3 B und habe Libreelec darauf installiert. Über die Add-ons habe ich auch Hyperion aufgespielt. Meine LED-Streifen (WS2801) leuchtet nur teilweise, es sind Lücken mit LED's die nicht leuchten und auch die Farben sind immer die Gleichen es ändert sich nichts(Die erste LED geht, und die Laufrichtung wurde beachtet). Ich habe den Stripe mit einem Steuergerät das man mit dem Handy steuern kann getestet und da funktioniert er einwandfrei. Eine SSH Verbindung kann auch hergestellt werden und es gibt keine Fehlermeldung beim übertragen. Aber wie gesagt der LED streifen reagiert überhaupt nicht.
    Ich habe auch schon den Loopback test gemacht und es wurde im Putty folgendes angezeigt:

    LibreELEC:~ # wget https://raw.githubusercontent.com/raspberrypi/linux/rpi-3.10.
    y/Documentation/spi/spidev_test.c
    ./spidev_test -D /dev/spidev0.0
    spi mode: 0
    bits per word: 8
    max speed: 500000 Hz (500 KHz)
    FF FF FF FF FF FF
    40 00 00 00 00 95
    FF FF FF FF FF FF
    FF FF FF FF FF FF
    FF FF FF FF FF FF
    DE AD BE EF BA AD
    F0 0DConnecting to raw.githubusercontent.com (151.101.12.133:443)
    wget: can't open 'spidev_test.c': File exists
    LibreELEC:~ # gcc -o spidev_test spidev_test.c
    -sh: gcc: not found
    LibreELEC:~ # ./spidev_test -D /dev/spidev0.0
    -sh: ./spidev_test: not found
    LibreELEC:~ # spi mode: 0
    -sh: spi: not found
    LibreELEC:~ # bits per word: 8
    -sh: bits: not found
    LibreELEC:~ # max speed: 500000 Hz (500 KHz)
    -sh: syntax error: unexpected "("
    LibreELEC:~ #
    LibreELEC:~ # FF FF FF FF FF FF
    -sh: FF: not found
    LibreELEC:~ # 40 00 00 00 00 95
    -sh: 40: not found
    LibreELEC:~ # FF FF FF FF FF FF
    -sh: FF: not found
    LibreELEC:~ # FF FF FF FF FF FF
    -sh: FF: not found
    LibreELEC:~ # FF FF FF FF FF FF
    -sh: FF: not found
    LibreELEC:~ # DE AD BE EF BA AD
    -sh: DE: not found
    LibreELEC:~ # F0 0D

    Ich hoffe mir kann wer weiterhelfen...
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,574
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    Also auf libeelec mit dem selben system konntest du die leds schonmal steuern?
     
  3. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    Danke für die schnelle Antwort.

    Nein über den Raspberry hat es noch nie geklappt. Es ist immer der oben beschriebene Zustand. Aber ich habe mir auf Amazon so einen Regler (Sp105E Magic Controller) gekauft der die LED's ansteuern kann und zb auch einen Regenbogeneffekt erzeugen kann. Dieser Regler war nur zum Test der LED's, der hatte nichts mit dem Raspberry zu tun und bei der Ansteuerung über den Regler haben alle LED's funktioniert. ich bin echt am verzweifeln. Hatte auch schon einen anderen Pi3 und einen Pi4 dranhängen mit dem selben Resultat.
     
  4. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,574
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    könntest du es erstmal mit raspbian bitte testen
     
  5. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    Ich habe es bereits auf Raspian, libreelec und openelec versucht, deswegen ist meine letzte Hoffnung dieses Forum. Bei allen 3 das gleiche. Die Log von Hyperion führt alle befehle, wie den Regenbogen swirl aus. Aber wie gesagt die LED‘s bleiben undefiniert.
     
  6. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,574
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    Config bitte
     
  7. pclin

    pclin Active Member

    Messages:
    126
    Hardware:
    +nodeMCU/ESP8266
    Was du in Post #1 schreibst und postest lässt drauf schließen das du nicht weist was du tust, und auch nicht liest was da ausgegeben wird!

    Einen Loopback test hast du versucht...
    Die Ausgaben aber völlig ignoriert. Du gibst irgendwas ein egal ob das Sinn macht.
    Ich fasse mal die wichtigsten Meldung zusammen:

    sh: gcc: not found
    -sh: spi: not found
    und noch jede Menge not found
    weil du irgendwas eintippst.

    gruß pclin
     
  8. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    @pclin Ich sehen nur das etwas nicht stimmt ich bin nicht sehr vertraut mit der Materie und bin deswegen auf Anleitungen im Internet angewiesen. Ich habe bisher alles versucht in sämtlichen Foren aber ohne Erfolg und jetzt wende ich mich an das Forum.

    @TPmodding Danke für deine Antwort. Ich bin froh das du dir das mal anschaust weil ich denke es ist die config die nicht stimmt. Aber wie gesagt ich habe es stur nach den Anleitungen im Internet gemacht.

    hier die Config:

    Code:
    # SPDX-License-Identifier: GPL-2.0-or-later
    # Copyright (C) 2009-2014 Stephan Raue ([email protected])
    # Copyright (C) 2016-present Team LibreELEC (https://libreelec.tv)
    ################################################################################
    # Bootloader configuration - config.txt
    ################################################################################
    
    ################################################################################
    # Memory (System/GPU configuration )
    ################################################################################
    
    # Default GPU memory split (do not change if you do not know what you are doing)
      gpu_mem=128
    
    # Configure GPU memory based on SDRAM size - overrides above setting
      gpu_mem_256=112
      gpu_mem_512=160
      gpu_mem_1024=256
    
    ################################################################################
    # For overclocking and various other settings, see:
    # https://www.raspberrypi.org/documentation/configuration/config-txt.md
    ################################################################################
    # Set 'force_turbo=1' to disable dynamic overclocking and enable overclocking always.
    force_turbo=0
    
    # Make display smaller to stop text spilling off the screen
    #
    # Note that the overscan settings only affect the splash screen and not Kodi.
    #
    # If you experience overscan/underscan issues the best solution is to adjust
    # your TV settings ("full pixel", "1-1 pixel" etc.). Alternatively, there is a
    # calibration menu in the Kodi GUI.
    # disable_overscan=1
    
    # Force HDMI even if unplugged or powered off
    # hdmi_force_hotplug=1
    
    # Doesn't sent initial active source message.
    # Avoids bringing CEC (enabled TV) out of standby and channel switch when
    # rebooting.
    hdmi_ignore_cec_init=1
    
    ################################################################################
    # License keys to enable GPU hardware decoding for various codecs
    # to obtain keys visit the shop at http://www.raspberrypi.com
    ################################################################################
    
    # decode_MPG2=0x00000000
    # decode_WVC1=0x00000000
    
    ################################################################################
    # End of default configuration
    ################################################################################
    
    ################################################################################
    # Include distribution specific config file if it exists.
    ################################################################################
    [all]
    include distroconfig.txt
    
    dtparam=spi=on
    
     
  9. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    Hier der Config von Hyperion. Mit dem ich auch keinen Erfolg hatte.

    Code:
    // Automatically generated configuration file for Hyperion ambilight daemon
    // Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)
    // Generated by: HyperCon (The Hyperion deamon configuration file builder)
    // Created with HyperCon V1.03.3 (22.10.2017)
    
    {
        // DEVICE CONFIGURATION
        "device" :
        {
            "name"       : "MyHyperionConfig",
            "type"       : "ws2801",
            "output"     : "/dev/spidev0.0",
            "rate"     : 1000000,
            "colorOrder" : "rbg"
        },
    
        // COLOR CALIBRATION CONFIG
        "color" :
        {
            "channelAdjustment" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "pureRed" :
                    {
                        "redChannel"        : 255,
                        "greenChannel"        : 0,
                        "blueChannel"        : 0
                    },
                    "pureGreen" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 255,
                        "blueChannel"        : 0
                    },
                    "pureBlue" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 0,
                        "blueChannel"        : 255
                    }
                }
            ],
            "temperature" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "correctionValues" :
                    {
                        "red"     : 255,
                        "green"    : 255,
                        "blue"     : 255
                    }
                }
            ],
            "transform" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "hsl" :
                    {
                        "saturationGain"    : 1.0000,
                        "luminanceGain"        : 1.0000,
                        "luminanceMinimum"        : 0.0000
                    },
                    "red" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    },
                    "green" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    },
                    "blue" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    }
                }
            ],
        // SMOOTHING CONFIG
            "smoothing" :
            {
                "type"            : "linear",
                "time_ms"         : 200,
                "updateFrequency" : 20.0000,
                "updateDelay"     : 0
            }
        },
    
        // V4L2 GRABBER CONFIG
        "grabber-v4l2" :
        {
            "device" : "/dev/video0",
            "input" : 0,
            "standard" : "NTSC",
            "width" : -1,
            "height" : -1,
            "frameDecimation" : 2,
            "sizeDecimation" : 8,
            "priority" : 900,
            "mode" : "2D",
            "cropLeft" : 0,
            "cropRight" : 0,
            "cropTop" : 0,
            "cropBottom" : 0,
            "redSignalThreshold" : 0.0,
            "greenSignalThreshold" : 0.0,
            "blueSignalThreshold" : 0.0
        },
    
        // FRAME GRABBER CONFIG
        "framegrabber" :
        {
            "width" : 64,
            "height" : 64,
            "frequency_Hz" : 10.0,
            "priority" : 890
        },
    
        // BLACKBORDER CONFIG
        "blackborderdetector" :
        {
            "enable" : true,
            "threshold" : 0.14,
            "unknownFrameCnt" : 600,
            "borderFrameCnt" : 50,
            "maxInconsistentCnt" : 10,
            "blurRemoveCnt" : 1,
            "mode" : "default"
        },
    
        // KODI CHECK CONFIG
        "xbmcVideoChecker" :
        {
            "xbmcAddress" : "127.0.0.1",
            "xbmcTcpPort" : 9090,
            "grabVideo" : true,
            "grabPictures" : true,
            "grabAudio" : true,
            "grabMenu" : false,
            "grabPause" : true,
            "grabScreensaver" : true,
            "enable3DDetection" : true
        },
    
        // BOOTEFFECT CONFIG
        "bootsequence" :
        {
            "color" : [0,0,0],
            "effect" : "Rainbow swirl fast",
            "duration_ms" : 3000,
            "priority" : 700
        },
    
        // JSON SERVER CONFIG
        "jsonServer" :
        {
            "port" : 19444
        },
    
        // PROTO SERVER CONFIG
        "protoServer" :
        {
            "port" : 19445
        },
    
        // BOBLIGHT SERVER CONFIG
        "boblightServer" :
        {
            "port" : 19333,
            "priority" : 900
        },
    
        // EFFECT PATH
        "effects" :
        {
            "paths" :
            [
                "/storage/hyperion/effects",
                "/usr/share/hyperion/effects"
            ]
        },
    
        // NO JSON/PROTO FORWARD CONFIG
    
        // LED CONFIGURATION
        "leds" :
        [
            {
                "index" : 0,
                "hscan" : { "minimum" : 0.9535, "maximum" : 0.9767 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 1,
                "hscan" : { "minimum" : 0.9767, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 2,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 3,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0417 }
            },
            {
                "index" : 4,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0417, "maximum" : 0.0833 }
            },
            {
                "index" : 5,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0833, "maximum" : 0.1250 }
            },
            {
                "index" : 6,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.1250, "maximum" : 0.1667 }
            },
            {
                "index" : 7,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.1667, "maximum" : 0.2083 }
            },
            {
                "index" : 8,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.2083, "maximum" : 0.2500 }
            },
            {
                "index" : 9,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.2500, "maximum" : 0.2917 }
            },
            {
                "index" : 10,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.2917, "maximum" : 0.3333 }
            },
            {
                "index" : 11,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.3333, "maximum" : 0.3750 }
            },
            {
                "index" : 12,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.3750, "maximum" : 0.4167 }
            },
            {
                "index" : 13,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.4167, "maximum" : 0.4583 }
            },
            {
                "index" : 14,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.4583, "maximum" : 0.5000 }
            },
            {
                "index" : 15,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.5000, "maximum" : 0.5417 }
            },
            {
                "index" : 16,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.5417, "maximum" : 0.5833 }
            },
            {
                "index" : 17,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.5833, "maximum" : 0.6250 }
            },
            {
                "index" : 18,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.6250, "maximum" : 0.6667 }
            },
            {
                "index" : 19,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.6667, "maximum" : 0.7083 }
            },
            {
                "index" : 20,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.7083, "maximum" : 0.7500 }
            },
            {
                "index" : 21,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.7500, "maximum" : 0.7917 }
            },
            {
                "index" : 22,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.7917, "maximum" : 0.8333 }
            },
            {
                "index" : 23,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.8333, "maximum" : 0.8750 }
            },
            {
                "index" : 24,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.8750, "maximum" : 0.9167 }
            },
            {
                "index" : 25,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.9167, "maximum" : 0.9583 }
            },
            {
                "index" : 26,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.9583, "maximum" : 1.0000 }
            },
            {
                "index" : 27,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 28,
                "hscan" : { "minimum" : 0.9767, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 29,
                "hscan" : { "minimum" : 0.9535, "maximum" : 0.9767 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 30,
                "hscan" : { "minimum" : 0.9302, "maximum" : 0.9535 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 31,
                "hscan" : { "minimum" : 0.9070, "maximum" : 0.9302 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 32,
                "hscan" : { "minimum" : 0.8837, "maximum" : 0.9070 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 33,
                "hscan" : { "minimum" : 0.8605, "maximum" : 0.8837 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 34,
                "hscan" : { "minimum" : 0.8372, "maximum" : 0.8605 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 35,
                "hscan" : { "minimum" : 0.8140, "maximum" : 0.8372 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 36,
                "hscan" : { "minimum" : 0.7907, "maximum" : 0.8140 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 37,
                "hscan" : { "minimum" : 0.7674, "maximum" : 0.7907 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 38,
                "hscan" : { "minimum" : 0.7442, "maximum" : 0.7674 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 39,
                "hscan" : { "minimum" : 0.7209, "maximum" : 0.7442 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 40,
                "hscan" : { "minimum" : 0.6977, "maximum" : 0.7209 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 41,
                "hscan" : { "minimum" : 0.6744, "maximum" : 0.6977 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 42,
                "hscan" : { "minimum" : 0.6512, "maximum" : 0.6744 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 43,
                "hscan" : { "minimum" : 0.6279, "maximum" : 0.6512 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 44,
                "hscan" : { "minimum" : 0.3488, "maximum" : 0.3721 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 45,
                "hscan" : { "minimum" : 0.3256, "maximum" : 0.3488 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 46,
                "hscan" : { "minimum" : 0.3023, "maximum" : 0.3256 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 47,
                "hscan" : { "minimum" : 0.2791, "maximum" : 0.3023 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 48,
                "hscan" : { "minimum" : 0.2558, "maximum" : 0.2791 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 49,
                "hscan" : { "minimum" : 0.2326, "maximum" : 0.2558 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 50,
                "hscan" : { "minimum" : 0.2093, "maximum" : 0.2326 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 51,
                "hscan" : { "minimum" : 0.1860, "maximum" : 0.2093 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 52,
                "hscan" : { "minimum" : 0.1628, "maximum" : 0.1860 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 53,
                "hscan" : { "minimum" : 0.1395, "maximum" : 0.1628 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 54,
                "hscan" : { "minimum" : 0.1163, "maximum" : 0.1395 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 55,
                "hscan" : { "minimum" : 0.0930, "maximum" : 0.1163 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 56,
                "hscan" : { "minimum" : 0.0698, "maximum" : 0.0930 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 57,
                "hscan" : { "minimum" : 0.0465, "maximum" : 0.0698 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 58,
                "hscan" : { "minimum" : 0.0233, "maximum" : 0.0465 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 59,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0233 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 60,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 61,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.9583, "maximum" : 1.0000 }
            },
            {
                "index" : 62,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.9167, "maximum" : 0.9583 }
            },
            {
                "index" : 63,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.8750, "maximum" : 0.9167 }
            },
            {
                "index" : 64,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.8333, "maximum" : 0.8750 }
            },
            {
                "index" : 65,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.7917, "maximum" : 0.8333 }
            },
            {
                "index" : 66,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.7500, "maximum" : 0.7917 }
            },
            {
                "index" : 67,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.7083, "maximum" : 0.7500 }
            },
            {
                "index" : 68,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.6667, "maximum" : 0.7083 }
            },
            {
                "index" : 69,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.6250, "maximum" : 0.6667 }
            },
            {
                "index" : 70,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.5833, "maximum" : 0.6250 }
            },
            {
                "index" : 71,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.5417, "maximum" : 0.5833 }
            },
            {
                "index" : 72,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.5000, "maximum" : 0.5417 }
            },
            {
                "index" : 73,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.4583, "maximum" : 0.5000 }
            },
            {
                "index" : 74,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.4167, "maximum" : 0.4583 }
            },
            {
                "index" : 75,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.3750, "maximum" : 0.4167 }
            },
            {
                "index" : 76,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.3333, "maximum" : 0.3750 }
            },
            {
                "index" : 77,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.2917, "maximum" : 0.3333 }
            },
            {
                "index" : 78,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.2500, "maximum" : 0.2917 }
            },
            {
                "index" : 79,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.2083, "maximum" : 0.2500 }
            },
            {
                "index" : 80,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.1667, "maximum" : 0.2083 }
            },
            {
                "index" : 81,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.1250, "maximum" : 0.1667 }
            },
            {
                "index" : 82,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.0833, "maximum" : 0.1250 }
            },
            {
                "index" : 83,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.0417, "maximum" : 0.0833 }
            },
            {
                "index" : 84,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0417 }
            },
            {
                "index" : 85,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 86,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0233 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 87,
                "hscan" : { "minimum" : 0.0233, "maximum" : 0.0465 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 88,
                "hscan" : { "minimum" : 0.0465, "maximum" : 0.0698 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 89,
                "hscan" : { "minimum" : 0.0698, "maximum" : 0.0930 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 90,
                "hscan" : { "minimum" : 0.0930, "maximum" : 0.1163 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 91,
                "hscan" : { "minimum" : 0.1163, "maximum" : 0.1395 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 92,
                "hscan" : { "minimum" : 0.1395, "maximum" : 0.1628 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 93,
                "hscan" : { "minimum" : 0.1628, "maximum" : 0.1860 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 94,
                "hscan" : { "minimum" : 0.1860, "maximum" : 0.2093 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 95,
                "hscan" : { "minimum" : 0.2093, "maximum" : 0.2326 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 96,
                "hscan" : { "minimum" : 0.2326, "maximum" : 0.2558 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 97,
                "hscan" : { "minimum" : 0.2558, "maximum" : 0.2791 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 98,
                "hscan" : { "minimum" : 0.2791, "maximum" : 0.3023 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 99,
                "hscan" : { "minimum" : 0.3023, "maximum" : 0.3256 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 100,
                "hscan" : { "minimum" : 0.3256, "maximum" : 0.3488 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 101,
                "hscan" : { "minimum" : 0.3488, "maximum" : 0.3721 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 102,
                "hscan" : { "minimum" : 0.3721, "maximum" : 0.3953 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 103,
                "hscan" : { "minimum" : 0.3953, "maximum" : 0.4186 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 104,
                "hscan" : { "minimum" : 0.4186, "maximum" : 0.4419 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 105,
                "hscan" : { "minimum" : 0.4419, "maximum" : 0.4651 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 106,
                "hscan" : { "minimum" : 0.4651, "maximum" : 0.4884 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 107,
                "hscan" : { "minimum" : 0.4884, "maximum" : 0.5116 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 108,
                "hscan" : { "minimum" : 0.5116, "maximum" : 0.5349 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 109,
                "hscan" : { "minimum" : 0.5349, "maximum" : 0.5581 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 110,
                "hscan" : { "minimum" : 0.5581, "maximum" : 0.5814 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 111,
                "hscan" : { "minimum" : 0.5814, "maximum" : 0.6047 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 112,
                "hscan" : { "minimum" : 0.6047, "maximum" : 0.6279 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 113,
                "hscan" : { "minimum" : 0.6279, "maximum" : 0.6512 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 114,
                "hscan" : { "minimum" : 0.6512, "maximum" : 0.6744 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 115,
                "hscan" : { "minimum" : 0.6744, "maximum" : 0.6977 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 116,
                "hscan" : { "minimum" : 0.6977, "maximum" : 0.7209 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 117,
                "hscan" : { "minimum" : 0.7209, "maximum" : 0.7442 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 118,
                "hscan" : { "minimum" : 0.7442, "maximum" : 0.7674 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 119,
                "hscan" : { "minimum" : 0.7674, "maximum" : 0.7907 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 120,
                "hscan" : { "minimum" : 0.7907, "maximum" : 0.8140 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 121,
                "hscan" : { "minimum" : 0.8140, "maximum" : 0.8372 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 122,
                "hscan" : { "minimum" : 0.8372, "maximum" : 0.8605 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 123,
                "hscan" : { "minimum" : 0.8605, "maximum" : 0.8837 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 124,
                "hscan" : { "minimum" : 0.8837, "maximum" : 0.9070 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 125,
                "hscan" : { "minimum" : 0.9070, "maximum" : 0.9302 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 126,
                "hscan" : { "minimum" : 0.9302, "maximum" : 0.9535 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            }
        ],
    
        "endOfJson" : "endOfJson"
    }
    
     
  10. Paulchen-Panther

    Paulchen-Panther Active Member Staff Member Developer

    Messages:
    602
    Hardware:
    RPi1/Zero, RPi3, 32/64bit, +Arduino
    Wie sieht es denn mit der Ausgabe von hyperion aus?
     
  11. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    @Paulchen-Panther hier ist die Log von Hyperion



    Code:
    SSH Traffic:
    ssh connected
    ssh out:     journalctl -u service.hyperion.service 2>/dev/null
    ssh in:     -- Logs begin at Thu 2019-04-11 16:28:36 UTC, end at Mon 2020-05-11 13:10:17 UTC. --
    ssh in:     Apr 11 16:28:40 LibreELEC systemd[1]: Starting Hyperion service...
    ssh in:     Apr 11 16:28:40 LibreELEC systemd[1]: Started Hyperion service.
    ssh in:     May 11 13:08:40 LibreELEC sh[575]: Hyperion Ambilight Deamon (584)
    ssh in:     May 11 13:08:40 LibreELEC sh[575]:         Version   : fb413cd7e8825ffc26925013f57ac93a774f12bc
    ssh in:     May 11 13:08:40 LibreELEC sh[575]:         Build Time: Feb  3 2020 17:29:53
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: INFO: Selected configuration file: /storage/.kodi/userdata/addon_data/service.hyperion/hyperion.config.json
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: HYPERION INFO: ColorTransform 'default' => [0; 45]
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: HYPERION INFO: ColorCorrection 'default' => [0; 45]
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: HYPERION INFO: ColorAdjustment 'default' => [0; 45]
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: LEDDEVICE INFO: configuration:
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: {
    ssh in:     May 11 13:08:41 LibreELEC sh[575]:         "colorOrder" : "rgb",
    ssh in:     May 11 13:08:41 LibreELEC sh[575]:         "name" : "MyHyperionConfig",
    ssh in:     May 11 13:08:41 LibreELEC sh[575]:         "output" : "/dev/null",
    ssh in:     May 11 13:08:41 LibreELEC sh[575]:         "rate" : 1000000,
    ssh in:     May 11 13:08:41 LibreELEC sh[575]:         "type" : "file"
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: }
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: INFO: Creating linear smoothing
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: EFFECTENGINE INFO: 27 effects loaded from directory /storage/.kodi/addons/service.hyperion/effects
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: INFO: Hyperion started and initialised
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: BLACKBORDER INFO: mode:default
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: started
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: INFO: Json server created and started on port 19444
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: INFO: Proto server created and started on port 19445
    ssh in:     May 11 13:08:41 LibreELEC sh[575]: QtHttpServer started on port 8099 "Qt Static HTTP File Server"
    ssh in:     May 11 13:08:44 LibreELEC sh[575]: EFFECTENGINE INFO: effect finished
    
     
  12. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,574
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    ssh in: May 11 13:08:41 LibreELEC sh[575]: {
    ssh in: May 11 13:08:41 LibreELEC sh[575]: "colorOrder" : "rgb",
    ssh in: May 11 13:08:41 LibreELEC sh[575]: "name" : "MyHyperionConfig",
    ssh in: May 11 13:08:41 LibreELEC sh[575]: "output" : "/dev/null",
    ssh in: May 11 13:08:41 LibreELEC sh[575]: "rate" : 1000000,
    ssh in: May 11 13:08:41 LibreELEC sh[575]: "type" : "file"
    ssh in: May 11 13:08:41 LibreELEC sh[575]: }

    sicher das du deine config auch auf den pi übertragen hast?

    ssh in: May 11 13:08:41 LibreELEC sh[575]: INFO: Selected configuration file: /storage/.kodi/userdata/addon_data/service.hyperion/hyperion.config.json
     
  13. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    @TPmodding Die Datei liegt in dem oben angegeben Verzeichnis. Allerdings war diese Methode neu, da ich Hyperion sonst immer über Putty installiert habe und diesmal im Kodi selbst als AddOn.
     

    Attached Files:

  14. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,574
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    ssh in: May 11 13:08:41 LibreELEC sh[575]: "type" : "file"

    du schreibst in ein file...also die leds werden nie angesprochen...
     
    • Like Like x 1
  15. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    @TPmodding danke für deine Geduld mit mir, kannst du mir erklären was ich machen muss oder wo der Fehler genau liegt? Ich kenn mich wie gesagt nicht so gut aus. Dann versuche ich das auszubessern.
     
  16. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,574
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    Deine Config die du hier gepostet hast...ist NICHT auf dem RPI, ersetz diese bitte mal, wenns klappt bekommst du in der ausgabe dann statt
    ssh in: May 11 13:08:41 LibreELEC sh[575]: "type" : "file"
    das hier:
    ssh in: May 11 13:08:41 LibreELEC sh[575]: "type" : "ws2801"
     
  17. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    @TPmodding Ich habe es heute morgen gleich ausprobiert und es hat sich tatsächlich etwas getan. Es leuchten jetzt nur noch ganz wenige LED's und alle in den gleichen Farben). Vorher waren zb. die ersten 4 LED's des Stripes an jetzt ist erst die 3. an und dann werden die Abstände größer.
    Auch in der Log von Hyperion habe ich jetzt bei File den richtigen Eintrag, aber dafür ein paar Fehler die er mir am Ende ausgibt.
    Zur Info ich versuche es im Moment noch ohne externen Grabber und nur über Kodi zum laufen zu bekommen, deswegen findet er wahrscheinlich keinen Externen Grabber.



    Code:
    ssh in:     May 13 08:22:44 LibreELEC systemd[1]: service.hyperion.service: Service RestartSec=10s expired, scheduling restart.
    ssh in:     May 13 08:22:44 LibreELEC systemd[1]: service.hyperion.service: Scheduled restart job, restart counter is at 6.
    ssh in:     May 13 08:22:44 LibreELEC systemd[1]: Stopped Hyperion service.
    ssh in:     May 13 08:22:44 LibreELEC systemd[1]: Starting Hyperion service...
    ssh in:     May 13 08:22:44 LibreELEC systemd[1]: Started Hyperion service.
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: Hyperion Ambilight Deamon (600)
    ssh in:     May 13 08:22:44 LibreELEC sh[597]:         Version   : fb413cd7e8825ffc26925013f57ac93a774f12bc
    ssh in:     May 13 08:22:44 LibreELEC sh[597]:         Build Time: Feb  3 2020 17:29:53
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: INFO: Selected configuration file: /storage/.kodi/userdata/addon_data/service.hyperion/hyperion.config.json
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: HYPERION INFO: ColorTransform 'default' => [0; 126]
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: HYPERION INFO: ColorCorrection 'default' => [0; 126]
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: HYPERION INFO: ColorAdjustment 'default' => [0; 126]
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: LEDDEVICE INFO: configuration:
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: {
    ssh in:     May 13 08:22:44 LibreELEC sh[597]:         "colorOrder" : "rgb",
    ssh in:     May 13 08:22:44 LibreELEC sh[597]:         "name" : "MyHyperionConfig",
    ssh in:     May 13 08:22:44 LibreELEC sh[597]:         "output" : "/dev/spidev0.0",
    ssh in:     May 13 08:22:44 LibreELEC sh[597]:         "rate" : 1000000,
    ssh in:     May 13 08:22:44 LibreELEC sh[597]:         "type" : "ws2801"
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: }
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: INFO: Creating linear smoothing
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: EFFECTENGINE INFO: 27 effects loaded from directory /storage/.kodi/addons/service.hyperion/effects
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: INFO: Hyperion started and initialised
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: BLACKBORDER INFO: mode:default
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: started
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: INFO: Kodi checker created and started
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: INFO: Json server created and started on port 19444
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: INFO: Proto server created and started on port 19445
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: QtHttpServer started on port 8099 "Qt Static HTTP File Server"
    ssh in:     May 13 08:22:44 LibreELEC sh[597]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     May 13 08:22:44 LibreELEC sh[597]:   what():  V4L2GRABBER ERROR: Cannot identify '/dev/video0' ERROR 2, No such file or directory
    ssh in:     May 13 08:22:44 LibreELEC systemd[1]: service.hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     May 13 08:22:44 LibreELEC systemd[1]: service.hyperion.service: Failed with result 'signal'.
    
     
  18. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,574
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    dann nimm mal den externen grabber aus der config, dann führt es auch nicht zum fehler
     
  19. Fabsi

    Fabsi New Member

    Messages:
    11
    Hardware:
    RPi3
    @TPmodding Schon mal vielen vielen Dank...seit 2 Monaten habe ich nun zum ersten mal den Regenbogen gesehen... Bei Kodi macht das LED Band nun schon seinen Dienst. Wenn ich die Datei wieder ändere und den externen Grabber hinzufüge bleibt das Band schwarz und er Spuckt er mir folgendes aus:

    liegt das an meinem Grabber? Ich habe da mal was von einem Chipsatz gelesen der nicht kompatibel ist. Ich habe den LogiLink (VG0001B)


    Code:
    ssh in:     May 13 15:28:20 LibreELEC systemd[1]: service.hyperion.service: Scheduled restart job, restart counter is at 5.
    ssh in:     May 13 15:28:20 LibreELEC systemd[1]: Stopped Hyperion service.
    ssh in:     May 13 15:28:20 LibreELEC systemd[1]: Starting Hyperion service...
    ssh in:     May 13 15:28:20 LibreELEC systemd[1]: Started Hyperion service.
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: Hyperion Ambilight Deamon (729)
    ssh in:     May 13 15:28:20 LibreELEC sh[726]:         Version   : fb413cd7e8825ffc26925013f57ac93a774f12bc
    ssh in:     May 13 15:28:20 LibreELEC sh[726]:         Build Time: Feb  3 2020 17:29:53
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: INFO: Selected configuration file: /storage/.kodi/userdata/addon_data/service.hyperion/hyperion.config.json
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: HYPERION INFO: ColorTransform 'default' => [0; 126]
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: HYPERION INFO: ColorCorrection 'default' => [0; 126]
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: HYPERION INFO: ColorAdjustment 'default' => [0; 126]
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: LEDDEVICE INFO: configuration:
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: {
    ssh in:     May 13 15:28:20 LibreELEC sh[726]:         "colorOrder" : "rgb",
    ssh in:     May 13 15:28:20 LibreELEC sh[726]:         "name" : "MyHyperionConfig",
    ssh in:     May 13 15:28:20 LibreELEC sh[726]:         "output" : "/dev/spidev0.0",
    ssh in:     May 13 15:28:20 LibreELEC sh[726]:         "rate" : 1000000,
    ssh in:     May 13 15:28:20 LibreELEC sh[726]:         "type" : "ws2801"
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: }
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: HYPERION INFO: Json forward to 127.0.0.1:19446
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: HYPERION INFO: Proto forward to 127.0.0.1:19447
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: INFO: Creating linear smoothing
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: EFFECTENGINE INFO: 27 effects loaded from directory /storage/.kodi/addons/service.hyperion/effects
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: INFO: Hyperion started and initialised
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: BLACKBORDER INFO: mode:default
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: started
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: INFO: Kodi checker created and started
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: INFO: Json server created and started on port 19444
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: INFO: Proto server created and started on port 19445
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: INFO: Boblight server created and started on port 19333
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: QtHttpServer started on port 8099 "Qt Static HTTP File Server"
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: BLACKBORDER INFO: mode:default
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: INFO: Frame grabber created and started
    ssh in:     May 13 15:28:20 LibreELEC sh[726]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     May 13 15:28:20 LibreELEC sh[726]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     May 13 15:28:20 LibreELEC systemd[1]: service.hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     May 13 15:28:20 LibreELEC systemd[1]: service.hyperion.service: Failed with result 'signal'.
    ssh in:     May 13 15:28:30 LibreELEC systemd[1]: Stopped Hyperion service.
    ssh in:     May 13 15:28:34 LibreELEC systemd[1]: Starting Hyperion service...
    ssh in:     May 13 15:28:34 LibreELEC systemd[1]: Started Hyperion service.
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: Hyperion Ambilight Deamon (740)
    ssh in:     May 13 15:28:34 LibreELEC sh[737]:         Version   : fb413cd7e8825ffc26925013f57ac93a774f12bc
    ssh in:     May 13 15:28:34 LibreELEC sh[737]:         Build Time: Feb  3 2020 17:29:53
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: INFO: Selected configuration file: /storage/.kodi/userdata/addon_data/service.hyperion/hyperion.config.json
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: HYPERION INFO: ColorTransform 'default' => [0; 126]
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: HYPERION INFO: ColorCorrection 'default' => [0; 126]
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: HYPERION INFO: ColorAdjustment 'default' => [0; 126]
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: LEDDEVICE INFO: configuration:
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: {
    ssh in:     May 13 15:28:34 LibreELEC sh[737]:         "colorOrder" : "rgb",
    ssh in:     May 13 15:28:34 LibreELEC sh[737]:         "name" : "MyHyperionConfig",
    ssh in:     May 13 15:28:34 LibreELEC sh[737]:         "output" : "/dev/spidev0.0",
    ssh in:     May 13 15:28:34 LibreELEC sh[737]:         "rate" : 1000000,
    ssh in:     May 13 15:28:34 LibreELEC sh[737]:         "type" : "ws2801"
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: }
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: HYPERION INFO: Json forward to 127.0.0.1:19446
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: HYPERION INFO: Proto forward to 127.0.0.1:19447
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: INFO: Creating linear smoothing
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: EFFECTENGINE INFO: 27 effects loaded from directory /storage/.kodi/addons/service.hyperion/effects
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: INFO: Hyperion started and initialised
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: BLACKBORDER INFO: mode:default
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: started
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: INFO: Kodi checker created and started
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: INFO: Json server created and started on port 19444
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: INFO: Proto server created and started on port 19445
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: INFO: Boblight server created and started on port 19333
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: QtHttpServer started on port 8099 "Qt Static HTTP File Server"
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: BLACKBORDER INFO: mode:default
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: INFO: Frame grabber created and started
    ssh in:     May 13 15:28:34 LibreELEC sh[737]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     May 13 15:28:34 LibreELEC sh[737]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     May 13 15:28:34 LibreELEC systemd[1]: service.hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     May 13 15:28:34 LibreELEC systemd[1]: service.hyperion.service: Failed with result 'signal'.
     
  20. Paulchen-Panther

    Paulchen-Panther Active Member Staff Member Developer

    Messages:
    602
    Hardware:
    RPi1/Zero, RPi3, 32/64bit, +Arduino