LEDs lighting up when everything is off - caused by 'No Signal' box

    I've attached an image from the grabber to show what I'm talking about -- my system works great, is fully calibrated, and I love it! But when everything is off, the LEDs will intermittently light up bright green because this No Signal box is floating around the input. I'm assuming the grabber is outputting this image because I have an HDMI switcher running in, and the issue still happens when that's off or even unplugged.


    How do I tell the grabber to sleep when no signal is coming in?


    Thanks in advance!!

    Hi,
    My setup had a similar issue, not with a floating box but a rainbow screen when no signal. My solution was to power off the leds when the TV power is off.


    I did this with a Powertail switch. (www.powerswitchtail.com) The switch has a connection for a low voltage source, that's plugged in to my TVs usb port. When there is voltage detected on the (usb) low voltage side it powers the main switch, that the led's power source is on.


    Just one idea, I'm sure there are other solutions as well.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden