1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Neu in der Hyerion Welt

Discussion in 'German Talk' started by Coolzero82, 24 October 2020.

  1. DayOne

    DayOne New Member

    Messages:
    16
    Bei den Jumper Kabel habe ich das Problem das die irgendwann ausleihern.
    Evtl. Saß eins nicht richtig. Ich hab an mein Led Strip nen USB Stecker gelötet und an mein wemo eine USB Buchse. Ich hab allerdings die Apa102 also ich brauche 4 Kabel. Durch die jumper Kabel ist mir auch gestern eine Led kaputtgegangen.
    Aber Wled ist echt genial hab gestern noch Mal 10m LEDs bestellt für weitere Projekte.


    Gibt es eigentlich auch ne Möglichkeit hyperion.ng im Windows Betrieb zu nutzen? Also auch beim zocken usw.
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,888
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    ja wenn du statt dem linux die windows version lädst :) auch unter releases auf github
     
    • Like Like x 1
  3. DayOne

    DayOne New Member

    Messages:
    16
    Sobald die LEDs da sind werde ich es gleich Mal probieren.

    Noch ne Frage. Gibt es auch irgendwie die Möglichkeiten mehre Wled anzusprechen? Das z.b. die Durchschnittsfarbe auch bei einer 2ten Lampe leuchtet?
     
  4. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,888
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    zweite instance anlegen und dort konfigurieren... :)
     
  5. DayOne

    DayOne New Member

    Messages:
    16
    Wie funktioniert das? Ich habe unter Konfiguration/Allgemein jetzt ne neue Instanz angelegt. Kann da aber nur Stop oder start drücken und bei LED Hardware kann ich weiterhin nur ein quelle auswählen.

    Schon gut hab den Button oben jetzt gesehen wo ich die andere Instanz öffnen kann.
     
  6. DayOne

    DayOne New Member

    Messages:
    16
    Kriege meine Nanoleaf nicht zum laufen. Habe mir den token mit Postman geholt und die IP eingetragen. Sobald ich sie instanz dann starte, geht nanoleaf aus und reagiert gar nicht mehr. Mit meiner HUE Go geht es problemlos.

    Dann noch was, ich war mir sicher es gibt auch eine Einstellung das er die durchnitsfarbe nimmt irgendwie finde ich die nicht mehr
     
  7. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    261
    Hardware:
    RPi3, 32/64bit
    Teile mal den LogOutput mit uns...
    Im UI System->Log
     
  8. DayOne

    DayOne New Member

    Messages:
    16
    Meinst du von coreelec das logfile?
     
  9. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,888
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    aus hyperion
     

    Attached Files:

    • logs.png
      logs.png
      File size:
      354.2 KB
      Views:
      11
  10. DayOne

    DayOne New Member

    Messages:
    16
    Jetzt gerade als ich alles wieder eingestellt habe für Nanoleaf ging es kurz.
    Ich glaube das nanoleaf stürtzt immer ab. Ich muss immer den Stecker danach ziehen weil es auf nichts mehr reagiert nach dem Hyperion es ansteuert.

    2015-01-01T00:00:22.548Z [hyperiond DAEMON] (INFO) CEC handler created 2015-01-01T00:00:22.577Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/ 2015-01-01T00:00:22.581Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/ 2015-01-01T00:00:22.582Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /storage/.kodi/userdata/addon_data/service.hyperion.ng/custom-effects 2015-01-01T00:00:22.608Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:107:SettingsManager()) Settings database initialized 2015-01-01T00:00:22.611Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default 2015-01-01T00:00:22.611Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled 2015-01-01T00:00:22.670Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:107:SettingsManager()) Settings database initialized 2015-01-01T00:00:22.672Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default 2015-01-01T00:00:22.672Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled 2015-01-01T00:00:22.736Z [hyperiond DAEMON] (INFO) set screen capture device to 'amlogic' 2015-01-01T00:00:22.737Z [hyperiond AMLOGICGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0 2015-01-01T00:00:22.749Z [hyperiond FRAMEBUFFERGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0 2015-01-01T00:00:22.750Z [hyperiond FRAMEBUFFERGRABBER] (INFO) Display opened with resolution: [email protected] 2015-01-01T00:00:22.750Z [hyperiond AMLOGICGRABBER] (DEBUG) (AmlogicGrabber.cpp:31:AmlogicGrabber()) constructed(160 x 160), grabber device: /dev/amvideocap0 2015-01-01T00:00:22.750Z [hyperiond DAEMON] (INFO) AMLOGIC grabber created 2015-01-01T00:00:22.751Z [hyperiond V4L2:AUTO] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0 2015-01-01T00:00:22.752Z [hyperiond V4L2:AUTO] (INFO) Signal threshold set to: {12, 12, 12} 2015-01-01T00:00:22.752Z [hyperiond V4L2:AUTO] (INFO) CEC detection is now disabled 2015-01-01T00:00:22.752Z [hyperiond V4L2:AUTO] (INFO) Signal detection is now disabled 2015-01-01T00:00:22.752Z [hyperiond V4L2:AUTO] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000 2015-01-01T00:00:22.753Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:574:handleSettingsUpdate()) V4L2 grabber created 2015-01-01T00:00:22.753Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:27:JsonServer()) Created instance 2015-01-01T00:00:22.754Z [hyperiond JSONSERVER] (INFO) Started on port 19444 2015-01-01T00:00:22.678Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'. 2015-01-01T00:00:22.678Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init()) 2015-01-01T00:00:22.678Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":130,"hardwareLedCount":130,"host":"192.168.178.97","latchTime":0,"type":"wled"}] 2015-01-01T00:00:22.678Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 0ms 2015-01-01T00:00:22.678Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 0ms 2015-01-01T00:00:22.679Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType : wled 2015-01-01T00:00:22.679Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount : 130 2015-01-01T00:00:22.679Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder : rgb 2015-01-01T00:00:22.679Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime : 0 2015-01-01T00:00:22.679Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI()) 2015-01-01T00:00:22.733Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1] 2015-01-01T00:00:22.734Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":130,"hardwareLedCount":130,"host":"192.168.178.97","latchTime":0,"port":19446,"type":"wled"}] 2015-01-01T00:00:22.734Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 0ms 2015-01-01T00:00:22.734Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 0ms 2015-01-01T00:00:22.734Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:44:init()) Successfully parsed 192.168.178.97 as an IP-address. 2015-01-01T00:00:22.734Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:74:init()) UDP socket will write to 192.168.178.97:19446 2015-01-01T00:00:22.734Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP : 192.168.178.97 2015-01-01T00:00:22.734Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port : 19446 2015-01-01T00:00:22.734Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1] 2015-01-01T00:00:22.745Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn()) 2015-01-01T00:00:22.746Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.97/json/state] [{"on":true}] 2015-01-01T00:00:22.755Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400 2015-01-01T00:00:22.756Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'nanoleaf'. 2015-01-01T00:00:22.757Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 0ms 2015-01-01T00:00:22.757Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0 2015-01-01T00:00:22.757Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled 2015-01-01T00:00:22.757Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver 2015-01-01T00:00:22.758Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver 2015-01-01T00:00:22.756Z [hyperiond PROTOSERVER] (INFO) Started on port 19445 2015-01-01T00:00:22.757Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 0ms 2015-01-01T00:00:22.759Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401 2015-01-01T00:00:22.759Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":9,"hardwareLedCount":9,"host":"192.168.178.198","panelOrderLeftRight":0,"panelOrderTopDown":1,"panelStartPos":0,"title":{},"token":"0uh7vdURXHA6h1W5a1cWuaNFvJT1l2Ux","type":"nanoleaf"}] 2015-01-01T00:00:22.759Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 0ms 2015-01-01T00:00:22.759Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 0ms 2015-01-01T00:00:22.759Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:134:init()) DeviceType : nanoleaf 2015-01-01T00:00:22.760Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:135:init()) LedCount : 9 2015-01-01T00:00:22.760Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:136:init()) ColorOrder : rgb 2015-01-01T00:00:22.760Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:137:init()) RewriteTime : 0 2015-01-01T00:00:22.760Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:138:init()) LatchTime : 0 2015-01-01T00:00:22.760Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0 2015-01-01T00:00:22.791Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:124:get()) GET: [http://192.168.178.198:16021/api/v1/0uh7vdURXHA6h1W5a1cWuaNFvJT1l2Ux/] 2015-01-01T00:00:22.815Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings 2015-01-01T00:00:22.815Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings 2015-01-01T00:00:22.815Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig 2015-01-01T00:00:22.815Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig 2015-01-01T00:00:22.815Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver' 2015-01-01T00:00:22.839Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [0] 2015-01-01T00:00:22.839Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'nanoleaf' signals error: 'Network unreachable' 2015-01-01T00:00:22.839Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [0] 2015-01-01T00:00:22.840Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'wled' signals error: 'Network unreachable' 2015-01-01T00:00:22.879Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2] 2015-01-01T00:00:22.880Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2] 2015-01-01T00:00:22.880Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive 2015-01-01T00:00:22.880Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive 2015-01-01T00:00:22.880Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started 2015-01-01T00:00:22.881Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 254 2015-01-01T00:00:22.882Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2] 2015-01-01T00:00:22.882Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive 2015-01-01T00:00:22.882Z [hyperiond HYPERION] (INFO) Inital background effect 'Rainbow swirl fast' started 2015-01-01T00:00:22.880Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started 2015-01-01T00:00:22.884Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive 2015-01-01T00:00:22.886Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 254 2015-01-01T00:00:22.886Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2] 2015-01-01T00:00:22.887Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled 2015-01-01T00:00:22.887Z [hyperiond AmLogic] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start() 2015-01-01T00:00:22.888Z [hyperiond AMLOGICGRABBER] (INFO) FB mode 2015-01-01T00:00:22.886Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive 2015-01-01T00:00:22.889Z [hyperiond HYPERION] (INFO) Inital background effect 'Rainbow swirl fast' started 2015-01-01T00:00:22.891Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive 2015-01-01T00:00:22.892Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled 2015-01-01T00:00:22.941Z [hyperiond AmLogic] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start() 2015-01-01T00:00:22.896Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created 2015-01-01T00:00:22.896Z [hyperiond BOBLIGHT] (INFO) Started on port 19333 2015-01-01T00:00:22.896Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Boblight server: enabled 2015-01-01T00:00:22.942Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started 2015-01-01T00:00:22.897Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created 2015-01-01T00:00:22.898Z [hyperiond BOBLIGHT] (INFO) Started on port 19334 2015-01-01T00:00:22.898Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Boblight server: enabled 2015-01-01T00:00:22.943Z [hyperiond HYPERION] (INFO) Hyperion instance 'Nanoleaf' has been started 2015-01-01T00:00:22.921Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:174:handleSettingsUpdate()) Setup SSL certificate 2015-01-01T00:00:22.921Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:190:handleSettingsUpdate()) Setup private SSL key 2015-01-01T00:00:22.922Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver' 2015-01-01T00:00:22.941Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 250 is now active 2015-01-01T00:00:22.942Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 0 2015-01-01T00:00:22.942Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[0], previousPriority[255] 2015-01-01T00:00:22.942Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:548:handlPriorityChangedLedDevice()) new source available -> switch LED-Device on 2015-01-01T00:00:22.941Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 250 is now active 2015-01-01T00:00:22.946Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 0 2015-01-01T00:00:22.947Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[0], previousPriority[255] 2015-01-01T00:00:22.947Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:548:handlPriorityChangedLedDevice()) new source available -> switch LED-Device on 2015-01-01T00:00:23.427Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 254 is now active 2015-01-01T00:00:23.432Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 254 is now active 2015-01-01T00:00:23.436Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 0 is now active 2015-01-01T00:00:23.441Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 0 is now active 2020-11-20T23:26:51.767Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:298:setCurrentTime()) Timeout clear for priority 0 2020-11-20T23:26:51.767Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:298:setCurrentTime()) Timeout clear for priority 0 2020-11-20T23:26:52.017Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 250 2020-11-20T23:26:52.017Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 250 2020-11-20T23:26:52.017Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[250], previousPriority[0] 2020-11-20T23:26:52.017Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[250], previousPriority[0] 2020-11-20T23:26:53.755Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.119 2020-11-20T23:26:53.756Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.119' switch to Hyperion instance 0 2020-11-20T23:26:54.203Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.119' switch to Hyperion instance 1 2020-11-20T23:26:54.280Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.119 2020-11-20T23:26:54.353Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.178.119 2020-11-20T23:26:54.781Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.119 2020-11-20T23:26:54.828Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.178.119 2020-11-20T23:27:10.794Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.119' switch to Hyperion instance 0 2020-11-20T23:27:14.221Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:76:setSourceAutoSelectEnabled()) Source auto select is now disabled 2020-11-20T23:27:14.221Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 254 2020-11-20T23:27:17.767Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 250 2020-11-20T23:27:21.177Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.119 2020-11-20T23:27:21.237Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.178.119 2020-11-20T23:28:09.862Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn()) 2020-11-20T23:28:09.862Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.97/json/state] [{"on":true}] 2020-11-20T23:28:09.863Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled 2020-11-20T23:28:10.070Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [200] 2020-11-20T23:28:14.036Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.119' switch to Hyperion instance 1 2020-11-20T23:28:16.782Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:516:changeToExternalControlMode()) Set Nanoleaf to External Control (UDP) streaming mode 2020-11-20T23:28:16.783Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.198:16021/api/v1/0uh7vdURXHA6h1W5a1cWuaNFvJT1l2Ux/effects] [{"write" : {"command" : "display", "animType" : "extControl", "extControlVersion" : "v2"}}] 2020-11-20T23:28:16.908Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [204] 2020-11-20T23:28:16.908Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'nanoleaf' signals error: ' Open error. UDP Socket not initialised!' 2020-11-20T23:28:18.099Z [hyperiond BOBLIGHT] (INFO) Stopped 2020-11-20T23:28:18.100Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Boblight server: disabled 2020-11-20T23:28:24.035Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.119' switch to Hyperion instance 0 2020-11-20T23:28:30.121Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.119' switch to Hyperion instance 1 2020-11-20T23:28:46.045Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Previous line repeats 1 times 2020-11-20T23:28:46.045Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.119' switch to Hyperion instance 0 2020-11-20T23:28:49.501Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.119' switch to Hyperion instance 1 2020-11-20T23:28:58.134Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:516:changeToExternalControlMode()) Set Nanoleaf to External Control (UDP) streaming mode 2020-11-20T23:28:58.134Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.198:16021/api/v1/0uh7vdURXHA6h1W5a1cWuaNFvJT1l2Ux/effects] [{"write" : {"command" : "display", "animType" : "extControl", "extControlVersion" : "v2"}}] 2020-11-20T23:28:58.285Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [204] 2020-11-20T23:28:58.286Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'nanoleaf' signals error: ' Open error. UDP Socket not initialised!' 2020-11-20T23:29:36.519Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:516:changeToExternalControlMode()) Set Nanoleaf to External Control (UDP) streaming mode 2020-11-20T23:29:36.520Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.198:16021/api/v1/0uh7vdURXHA6h1W5a1cWuaNFvJT1l2Ux/effects] [{"write" : {"command" : "display", "animType" : "extControl", "extControlVersion" : "v2"}}] 2020-11-20T23:29:36.695Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [204] 2020-11-20T23:29:36.695Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'nanoleaf' signals error: ' Open error. UDP Socket not initialised!' 2020-11-20T23:30:27.098Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:516:changeToExternalControlMode()) Set Nanoleaf to External Control (UDP) streaming mode 2020-11-20T23:30:27.098Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.198:16021/api/v1/0uh7vdURXHA6h1W5a1cWuaNFvJT1l2Ux/effects] [{"write" : {"command" : "display", "animType" : "extControl", "extControlVersion" : "v2"}}] 2020-11-20T23:30:46.938Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:516:changeToExternalControlMode()) Set Nanoleaf to External Control (UDP) streaming mode 2020-11-20T23:30:46.938Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.198:16021/api/v1/0uh7vdURXHA6h1W5a1cWuaNFvJT1l2Ux/effects] [{"write" : {"command" : "display", "animType" : "extControl", "extControlVersion" : "v2"}}] 2020-11-20T23:30:52.162Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [0] 2020-11-20T23:30:52.163Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'nanoleaf' signals error: ' Open error. UDP Socket not initialised!' 2020-11-20T23:30:55.904Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [0] 2020-11-20T23:30:55.904Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'nanoleaf' signals error: ' Open error. UDP Socket not initialised!' 2020-11-20T23:31:04.041Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:516:changeToExternalControlMode()) Set Nanoleaf to External Control (UDP) streaming mode 2020-11-20T23:31:04.041Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.198:16021/api/v1/0uh7vdURXHA6h1W5a1cWuaNFvJT1l2Ux/effects] [{"write" : {"command" : "display", "animType" : "extControl", "extControlVersion" : "v2"}}] 2020-11-20T23:31:04.058Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [0] 2020-11-20T23:31:04.058Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'nanoleaf' signals error: ' Open error. UDP Socket not initialised!' 2020-11-20T23:31:22.277Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceNanoleaf.cpp:516:changeToExternalControlMode()) Set Nanoleaf to External Control (UDP) streaming mode 2020-11-20T23:31:22.277Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:153:put()) PUT: [http://192.168.178.198:16021/api/v1/0uh7vdURXHA6h1W5a1cWuaNFvJT1l2Ux/effects] [{"write" : {"command" : "display", "animType" : "extControl", "extControlVersion" : "v2"}}] 2020-11-20T23:31:22.437Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [204] 2020-11-20T23:31:22.438Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'nanoleaf' signals error: ' Open error. UDP Socket not initialised!' 2020-11-20T23:31:39.452Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.119


    EDIT:
    Jetzt geht es gerade wieder.
    Wer weis wie lange. Am Wlan signal kann es eigentlich nicht liegen denn die Panels sind genau über den Router angebracht.
     
    Last edited: 21 November 2020
  11. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    261
    Hardware:
    RPi3, 32/64bit
    Schau mal in Dein log. Dort sind lauter Netzwerk Issues...
    Starte hyperion nochmal neu.

    Hast Du ggf. noch einen andere Anwendung laufen, die zum Nanoleaf streamt?
    Und welches Nanoleaf hast Du?
     
  12. DayOne

    DayOne New Member

    Messages:
    16
    Vor dem log habe ich neugestartet dann lief es auch kurz wieder. Dann ist es wieder kurz darauf hängen geblieben und ich habe wieder alles neu gestartet. Dann ging es gestern auch erst Mal. Schauen wie es heute Abend aussieht.

    Das nanoleaf wird eigentlich nur mit Alexa an/aus geschaltet sonst streamt nur Hyperion.

    Wollte eigentlich Mal meine S905X3 Box gegen den Raspberry Pi4 Tauschen und alles neu aufsetzen. Hab dann aber gelesen daß viele Probleme mit HDR haben. Das läuft jetzt aber super bei mir mit Ambilight.
     
    Last edited: 21 November 2020
  13. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    261
    Hardware:
    RPi3, 32/64bit
    Welches Nanoleaf hast Du denn. Lights aka Aurora, Canvas oder das neue Shapes?
     
  14. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    261
    Hardware:
    RPi3, 32/64bit
    The problem is that the initial call is not successful

    2015-01-01T00:00:22.839Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:182:getResponse()) Reply.httpStatusCode [0]
    2015-01-01T00:00:22.839Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'nanoleaf' signals error: 'Network unreachable'

    It must look like this and the the details of your Nanoleaf are written to the log
    2020-11-21T20:43:45.828 hyperiond LEDDEVICE : <DEBUG> ProviderRestApi.cpp:179:getResponse() | Reply.httpStatusCode [200]

    Then you try to enable the device via the remote control and it looks like that I do not check that the device is not in a proper state.
    That is why you might see subsequent errors.

    Suggest you get over the first error by having the nanoleafs accessible.
     
  15. DayOne

    DayOne New Member

    Messages:
    16
    Es ist das nanoleaf Aurora aber es läuft aktuell problemlos.

    Kannst du mir evtl. Noch weiterhelfen mit Enigmalight?

    Ich habe den boblight Server gestartet in Hyperion und alle Daten in meiner vu+ eingetragen. Es läuchtet nichts. Ich sehe in Hyperion nicht Mal ein anderes Gerät also in der Prioritäten Liste.
     
  16. Lord-Grey

    Lord-Grey Moderator Staff Member Developer

    Messages:
    261
    Hardware:
    RPi3, 32/64bit
    Gut, dass das Nanoleaf jetzt läuft!

    Also immer erst mal im Log schauen.....

    Bzw. was zeigt das Log bei der Enigmalight Konfiguration?
    Ich kenn mich hier leider nicht aus, aber vielleicht finden wir ja gemeinsam was raus....

    Plus, wie sieht Deine Device Konfiguration hierzu aus?
     
  17. DieserEiner

    DieserEiner New Member

    Messages:
    2
    Hardware:
    RPi3
    Hallo zusammen, ich habe alles nun zum laufen gebracht, der externe Grabber funktioniert problemlos bis auf Netflix.
    ich habe folgenden Aufbau:
    PS4 Pro - Splitter mit Downscaler - AV-Converter - Grabber - Raspberry Pi 3b+ Raspberry OS mit hyperion.
    Amazon, Youtube, PS4 Spiele geht alles wunderbar. Lediglich bei der Netflix App reagieren die Leds nicht. Sie leuchten dauerhaft in Regenbogenfarben.
    Ich bin für jegliche Tips und Infos dankbar.

    Beste Grüße,
    ThisOne
     
  18. DayOne

    DayOne New Member

    Messages:
    16

    Besten Dank aber hab es hinbekommen. Hab die Box noch Mal neu aufgesetzt und dann ging es auf Anhieb.