Not installed via HyperCon

the_stig · 6. August 2016

Hey Guys,

I needed to reinstall raspian. On a fresh install of raspian I startet the installation of Hyperion via HyperCon and log tells me install was fine. But afterwards I always get "unable to connect to host" when trying to get a colour going. Log attached. No files in etc/hyperion although log tells me config.json was uploaded. No files in /opt. Any ideas from your side?

EDIT: What are these strange symbols before the paths?

Code

SSH Traffic:
ssh connected
ssh out:     cd /tmp && wget -nv -N https://raw.github.com/hyperion-project/hyperion/master/bin/remove_hyperion.sh && chmod +x remove_hyperion.sh && sudo sh ./remove_hyperion.sh HyperConRemove ; rm remove_hyperion.sh
ssh out:     Last-modified header missing -- time-stamps turned off.
ssh out:     2016-08-06 15:30:32 URL:https://raw.githubusercontent.com/hyperion-project/hyperion/master/bin/remove_hyperion.sh [4083/4083] -> "remove_hyperion.sh" [1]
ssh in:     *******************************************************************************
ssh in:     This script will remove Hyperion and itￂﾴs services
ssh in:     -----> Please BACKUP your hyperion.config.json if necessary <-----
ssh in:     Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in:     *******************************************************************************
ssh in:     ---> Stop Hyperion, if necessary
ssh in:     ---> Delete and disable Hyperion systemd script
ssh out:     Removed symlink /etc/systemd/system/multi-user.target.wants/hyperion.service.
ssh in:     removed ￢ﾀﾘ/etc/systemd/system/hyperion.service￢ﾀﾙ
ssh in:     ---> Remove links to the binaries
ssh in:     removed ￢ﾀﾘ/usr/bin/hyperiond￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/bin/hyperion-remote￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/bin/hyperion-v4l2￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/bin/hyperion-dispmanx￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/bin/hyperion-x11￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/bin/hyperion-aml￢ﾀﾙ
ssh in:     ---> Remove binaries
ssh in:     removed directory: ￢ﾀﾘ/etc/hyperion￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/mood-blobs-warm.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/udp-mcast.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/rainbow-swirl.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/mood-blobs-green.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/snake.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/strobe.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/running_dots.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/fade.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/knight-rider.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/mood-blobs-red.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/strobe-blue.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/police-lights-single.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/mood-blobs-blue.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/cinema-fade-off.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/sparks.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/sparks-color.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/running_dots.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/random.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/mood-blobs.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/rainbow-mood.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/rainbow-swirl.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/mood-blobs-full.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/knight-rider.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/rainbow-swirl-fast.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/police.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/sparks.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/shutdown.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/mood-blobs-cold.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/rainbow-mood.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/shutdown.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/traces.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/x-mas.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/udp.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/police-lights-solid.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/udp.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/random.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/strobe-white.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/snake.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/traces.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/x-mas.py￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/strobe-raspbmc.json￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/effects/cinema-fade-in.json￢ﾀﾙ
ssh in:     removed directory: ￢ﾀﾘ/usr/share/hyperion/effects￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/bin/hyperion-remote￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/bin/hyperion-v4l2￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/bin/hyperion-dispmanx￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/bin/hyperiond￢ﾀﾙ
ssh in:     removed directory: ￢ﾀﾘ/usr/share/hyperion/bin￢ﾀﾙ
ssh in:     removed ￢ﾀﾘ/usr/share/hyperion/config/hyperion.config.json.example￢ﾀﾙ
ssh in:     removed directory: ￢ﾀﾘ/usr/share/hyperion/config￢ﾀﾙ
ssh in:     removed directory: ￢ﾀﾘ/usr/share/hyperion￢ﾀﾙ
ssh in:     *******************************************************************************
ssh in:     Hyperion successful removed!
ssh in:     *******************************************************************************
ssh out:     cd /tmp && wget -nv -N https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out:     Last-modified header missing -- time-stamps turned off.
ssh out:     2016-08-06 15:30:44 URL:https://raw.githubusercontent.com/hyperion-project/hyperion/master/bin/install_hyperion.sh [14493/14493] -> "install_hyperion.sh" [1]
ssh in:     *******************************************************************************
ssh in:     This script will install/update Hyperion Ambient Light
ssh in:     Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in:     *******************************************************************************
ssh in:     ---> Stop Hyperion, if necessary
ssh in:     ---> Install/Update Hyperion dependencies (This may take a while)
ssh in:     ---> Downloading the appropriate Hyperion release
ssh out:     2016-08-06 15:31:23 URL:http://netix.dl.sourceforge.net/project/hyperion-project/release/hyperion_rpi2.tar.gz [1637006/1637006] -> "-" [1]
ssh in:     ---> Installing systemd script
ssh in:     ---> Starting Hyperion
ssh in:     *******************************************************************************
ssh in:     Hyperion Installation/Update finished!
ssh in:     Please download the latest HyperCon version to benefit from new features!
ssh in:     To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in:     Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in:     *******************************************************************************
sftp Send Hyperion Config - Sourcepath: , Targetpath: /etc/hyperion/, Filename: hyperion.config.json

Alles anzeigen

the_stig · 6. August 2016

Edit: Forgot the logs for unable to connect:

Code

sh out:     hyperion-remote  -c 1189ff
ssh in:     hyperion-remote:
ssh in:         version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
ssh in:         build time: Jul 25 2016 06:54:18
ssh out:     Unable to connect to host

the_stig · 7. August 2016

Ok, got it thanks to Rick164: config.json wasn't copied /etc/hyperion. After doing this manually all is fine!

Brindosch · 10. August 2016

Zitat von the_stig

Sourcepath: ,

Ah, now i see it. You need to select your configuration you want to upload before you upload it :). Your path is empty.

the_stig · 11. August 2016

Hrm, do you mean the "Name of configuration"...its the standard "MyHyperionConfig"...or do you mean something other?

Brindosch · 11. August 2016

Left to the "send" button you need to select your created configuration you want to push.

the_stig · 11. August 2016

Ok thanks...so this config is not dummy proof Stupid me thought this sourcepath is if you want to upload it to some other place...thanks again.

Suggestion: add a check to hypercon if sourcepath is set?

Brindosch · 11. August 2016

There is much more that is not clear or not very error tolerant
There is something i learned with hyperion, (and feedback or support requests) design it always as easy as possible from user view
As usual people don't read docs, all possible errors needs to be sorted out from the beginning

All this will be taken into account for the future

Not installed via HyperCon

Jetzt mitmachen!

Benutzer online in diesem Thema