1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Random LEDs come on

Discussion in 'Hyperion General' started by GJC, 9 January 2021 at 13:41.

  1. GJC

    GJC New Member

    Messages:
    2
    Hardware:
    RPi3
    I have a strange problem where after the HyperBian boot sequence of lights or after "Power Off" action is chosen from Hyperion app on Android, not all of the LEDs go out, it is different LEDs each time (see pics).

    Issue - LEDs StaycOn.jpg

    The LEDs all behave correctly for any chosen colour or effect.

    If I create an "effect" where all LEDs are set to rgb(0,0,0), they all go out, so I know they are controlling "off" correctly.
    However once the effect timeout is reached random LEDs come back on again.

    Any ideas?

    (Latest HyperBian, Pi Zero WH, 34 x WS2801 LEDs, 5A PSU)
     
  2. Alpha7

    Alpha7 New Member

    Messages:
    10
    Hardware:
    RPi1/Zero
    Is your pi being powered via USB or via your power supply?

    If you do other effects once it's booted do they respond as well? What happens after you then stop like the build in "led test"?