Hey peeps,
I hava a raspberry with hyperbian installed. This one is version hyperion 2.0.0 alpha 8.
I've uploaded the following code to my arduino: https://raw.githubusercontent.…perion/master/ArduinoCode
Only changed the led number to 268 and data pin to 51 (6 on the Uno) of my mega2560. After sending the code i see my leds flashing in the colors called in teh code.
After that i'd go to the hyperion webpage and set it up.
I choose adalight, 268 leds, baudt 500000 and save (also tried 150000 on arduino and hyperion). Output to ttyUSB0 and input from usb hdmi grabber. This is working when i check the preview. But no reaction from the leds, also not the startup effect from hyperion.
I see alpha 9 in available, but i dont know how to install this on my hyperbian. Does anyone know the code to put in ssh?
I'll hope some1 can help me solve this. See below for a debug log. If you have questions, your welcome.
2020-11-19T18:08:27.134Z [hyperiond DAEMON] (INFO) CEC handler created
2020-11-19T18:08:27.159Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2020-11-19T18:08:27.165Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2020-11-19T18:08:27.167Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory //.hyperion/custom-effects
2020-11-19T18:08:27.260Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:107:SettingsManager()) Settings database initialized
2020-11-19T18:08:27.267Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-11-19T18:08:27.268Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-11-19T18:08:27.329Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2020-11-19T18:08:27.329Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-11-19T18:08:27.331Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 640x480
2020-11-19T18:08:27.332Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2020-11-19T18:08:27.333Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2020-11-19T18:08:27.334Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-11-19T18:08:27.418Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 1920, height: 1080 for capture
2020-11-19T18:08:27.418Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
2020-11-19T18:08:27.418Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled
2020-11-19T18:08:27.419Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled
2020-11-19T18:08:27.419Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2020-11-19T18:08:27.419Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:568:handleSettingsUpdate()) V4L2 grabber created
2020-11-19T18:08:27.420Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:27:JsonServer()) Created instance
2020-11-19T18:08:27.420Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2020-11-19T18:08:27.337Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'adalight'.
2020-11-19T18:08:27.338Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-11-19T18:08:27.338Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"grb","currentLedCount":268,"delayAfterConnect":500,"hardwareLedCount":100,"latchTime":30,"lightberry_apa102_mode":true,"output":"ttyUSB0","rate":500000,"rewriteTime":1000,"type":"adalight"}]
2020-11-19T18:08:27.338Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 30ms
2020-11-19T18:08:27.338Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:423:setRewriteTime()) Refresh interval = 1000ms
2020-11-19T18:08:27.339Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 1000ms
2020-11-19T18:08:27.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType : adalight
2020-11-19T18:08:27.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount : 268
2020-11-19T18:08:27.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder : grb
2020-11-19T18:08:27.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime : 1000
2020-11-19T18:08:27.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime : 30
2020-11-19T18:08:27.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName : ttyUSB0
2020-11-19T18:08:27.340Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice : 0
2020-11-19T18:08:27.340Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz : 500000
2020-11-19T18:08:27.340Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 500
2020-11-19T18:08:27.340Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:42:init()) Adalight driver with activated LightBerry APA102 mode
2020-11-19T18:08:27.340Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:58:init()) Adalight header for 268 leds: Ada 0x01 0x0c 0x58
2020-11-19T18:08:27.340Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyUSB0
2020-11-19T18:08:27.340Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyUSB0, Baud rate [500000]bps
2020-11-19T18:08:27.355Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2020-11-19T18:08:27.370Z [hyperiond EFFECTENGINE] (INFO) Run effect "Knight rider" on channel 0
2020-11-19T18:08:27.397Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName: ttyUSB0
2020-11-19T18:08:27.398Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation: /dev/ttyUSB0
2020-11-19T18:08:27.399Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description: USB2.0-Serial
2020-11-19T18:08:27.399Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer: 1a86
2020-11-19T18:08:27.399Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x7523
2020-11-19T18:08:27.399Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier: 0x1a86
2020-11-19T18:08:27.399Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:
2020-11-19T18:08:27.403Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:173:tryOpen()) delayAfterConnect for 500 ms - start
2020-11-19T18:08:27.422Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2020-11-19T18:08:27.423Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2020-11-19T18:08:27.426Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-11-19T18:08:27.426Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-11-19T18:08:27.444Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Knight rider], smoothCfg [2]
2020-11-19T18:08:27.444Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-11-19T18:08:27.445Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Knight rider' started
2020-11-19T18:08:27.446Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2020-11-19T18:08:27.447Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2020-11-19T18:08:27.451Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
2020-11-19T18:08:27.451Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1
2020-11-19T18:08:27.453Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=1920 height=1080
2020-11-19T18:08:27.454Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 5 fps
2020-11-19T18:08:27.454Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2020-11-19T18:08:27.476Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
2020-11-19T18:08:27.477Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-11-19T18:08:27.453Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-11-19T18:08:27.478Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2020-11-19T18:08:27.500Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 0 is now active
2020-11-19T18:08:27.500Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 0
2020-11-19T18:08:27.501Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-11-19T18:08:27.501Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:548:handlPriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-11-19T18:08:27.597Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-11-19T18:08:27.597Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-11-19T18:08:27.597Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-11-19T18:08:27.597Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-11-19T18:08:27.598Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2020-11-19T18:08:27.904Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:180:tryOpen()) delayAfterConnect for 500 ms - finished
2020-11-19T18:08:27.905Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-11-19T18:08:27.907Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 240 is now active
2020-11-19T18:08:27.984Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.88.190
2020-11-19T18:08:27.985Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.88.190' switch to Hyperion instance 0
2020-11-19T18:08:28.131Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:174:handleSettingsUpdate()) Setup SSL certificate
2020-11-19T18:08:28.133Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:190:handleSettingsUpdate()) Setup private SSL key
2020-11-19T18:08:28.133Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2020-11-19T18:08:30.658Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:298:setCurrentTime()) Timeout clear for priority 0
2020-11-19T18:08:30.908Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 240
2020-11-19T18:08:30.910Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[240], previousPriority[0]
2020-11-19T18:35:18.854Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.88.190
2020-11-19T18:35:18.875Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.88.190
2020-11-19T18:35:59.195Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:196:writeBytes()) _inClosing [1], enabled [0], _deviceReady [1], _frameDropCounter [0]
2020-11-19T18:35:59.197Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:209:writeBytes()) [416461010c5800000000ff000000ff000000ff000000ff000000ff000000ff00]
2020-11-19T18:35:59.197Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:248:writeBytes()) In Closing: bytesWritten [1099], _rs232Port.error() [0], (null)
2020-11-19T18:35:59.197Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:252:writeBytes()) [0], _inClosing[1], enabled [0], _deviceReady [1]
2020-11-19T18:35:59.229Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:196:writeBytes()) _inClosing [1], enabled [0], _deviceReady [1], _frameDropCounter [0]
2020-11-19T18:35:59.230Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:209:writeBytes()) [416461010c5800000000ff000000ff000000ff000000ff000000ff000000ff00]
2020-11-19T18:35:59.231Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:248:writeBytes()) In Closing: bytesWritten [1099], _rs232Port.error() [0], (null)
2020-11-19T18:35:59.232Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:252:writeBytes()) [0], _inClosing[1], enabled [0], _deviceReady [1]
2020-11-19T18:35:59.233Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:93:close()) Flush was successful
2020-11-19T18:35:59.234Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:95:close()) Close UART: ttyUSB0
2020-11-19T18:36:00.136Z [hyperiond LEDDEVICE] (INFO) Stopped LedDevice 'adalight'
2020-11-19T18:36:00.141Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'adalight'.
2020-11-19T18:36:00.142Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"grb","currentLedCount":268,"delayAfterConnect":0,"hardwareLedCount":268,"latchTime":30,"lightberry_apa102_mode":true,"output":"ttyUSB0","rate":500000,"rewriteTime":1000,"type":"adalight"}]
2020-11-19T18:36:00.142Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 30ms
2020-11-19T18:36:00.142Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:423:setRewriteTime()) Refresh interval = 1000ms
2020-11-19T18:36:00.143Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 1000ms
2020-11-19T18:36:00.143Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType : adalight
2020-11-19T18:36:00.143Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount : 268
2020-11-19T18:36:00.143Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder : grb
2020-11-19T18:36:00.143Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime : 1000
2020-11-19T18:36:00.144Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime : 30
2020-11-19T18:36:00.144Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName : ttyUSB0
2020-11-19T18:36:00.144Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice : 0
2020-11-19T18:36:00.144Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz : 500000
2020-11-19T18:36:00.145Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 0
2020-11-19T18:36:00.146Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:42:init()) Adalight driver with activated LightBerry APA102 mode
2020-11-19T18:36:00.146Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceAdalight.cpp:58:init()) Adalight header for 268 leds: Ada 0x01 0x0c 0x58
2020-11-19T18:36:00.146Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyUSB0
2020-11-19T18:36:00.146Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyUSB0, Baud rate [500000]bps
2020-11-19T18:36:00.162Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled
2020-11-19T18:36:00.244Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName: ttyUSB0
2020-11-19T18:36:00.244Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation: /dev/ttyUSB0
2020-11-19T18:36:00.244Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description: USB2.0-Serial
2020-11-19T18:36:00.245Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer: 1a86
2020-11-19T18:36:00.245Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x7523
2020-11-19T18:36:00.245Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier: 0x1a86
2020-11-19T18:36:00.246Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:
2020-11-19T18:36:00.249Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-11-19T18:36:42.908Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.88.190
2020-11-19T18:36:42.937Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.88.190
2020-11-19T18:37:05.520Z [hyperiond EFFECTENGINE] (INFO) Run effect "Double swirl" on channel 1
2020-11-19T18:37:05.522Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Double swirl], smoothCfg [2]
2020-11-19T18:37:05.523Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'Web Configuration@::ffff:192.168.88.190/EFFECT' with priority 1 as inactive
2020-11-19T18:37:05.733Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 1 is now active
2020-11-19T18:37:05.734Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 1
2020-11-19T18:37:05.736Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[1], previousPriority[240]
2020-11-19T18:37:08.790Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:255:clearInput()) Removed source priority 1
2020-11-19T18:37:08.793Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 240
2020-11-19T18:37:08.796Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[240], previousPriority[1]
2020-11-19T18:37:08.872Z [hyperiond EFFECTENGINE] (INFO) effect finished
2020-11-19T18:37:12.825Z [hyperiond EFFECTENGINE] (INFO) Run effect "Candle" on channel 1
2020-11-19T18:37:12.829Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Candle], smoothCfg [2]
2020-11-19T18:37:12.830Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'Web Configuration@::ffff:192.168.88.190/EFFECT' with priority 1 as inactive
2020-11-19T18:37:13.006Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:198:setInput()) Priority 1 is now active
2020-11-19T18:37:13.006Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 1
2020-11-19T18:37:13.007Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[1], previousPriority[240]
2020-11-19T18:37:17.267Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.88.190