Hallo Zusammen,
ich brauche Hilfe, ich komme nicht weiter.
Vorab Infos zu der Hardware
RP3 mit aktuellstem LibreElec
WS2801 mit 60LED/m
Strom liegt sowohl am Anfang, als auch am Ende des Gesamtbandes an,
die Ecken sind gelötet.
Habe Anfang November alle Komponenten gekauft und montiert.
Nach der ersten Installation lief auch alles einwandfrei.
Mitte Dezember kam es dann zu vereinzeltem Zucken bzw Blitzen
und die LEDs haben sich auch schonmal aufgehangen.
In den letzten Tagen habe ich mich dann damit beschäftigt alles neu
aufzusetzen und bin beider Installation gleich vorgegangen,
allerdings ohne wirklichen Erfolg.
Stand Jetzt leuchtet nur das erste LED-Band und der Anfang vom zweiten (siehe Bild).
Beim booten reagieren nur die angesprochenen LEDs und eine Art Regenbogen lässt sich
erahnen, allerdings eher in Weißtönen.
Hat jemand eine Idee woran dies liegen kann?
Habe Screenshots von den Hyperion-Einstellungen gemacht.
Anbei noch der Log:
SSH Traffic:
ssh connected
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (610)
ssh in: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Build Time: Apr 5 2018 01:57:25
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: terminate called after throwing an instance of 'std::runtime_error'
ssh in: what(): Failed to parse configuration: * Line 1, Column 1
ssh in: Syntax error: value, object or array expected.
ssh in: Aborted
sftp Send Hyperion Config - Sourcepath: C:/Users/Achim3000/Desktop/hyp, Targetpath: /storage/.config/, Filename: hyperion.config.json
ssh out: killall hyperiond 2>/dev/null
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (610)
ssh in: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Build Time: Apr 5 2018 01:57:25
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: terminate called after throwing an instance of 'std::runtime_error'
ssh in: what(): Failed to parse configuration: * Line 1, Column 1
ssh in: Syntax error: value, object or array expected.
ssh in: Aborted
ssh out: killall hyperiond 2>/dev/null
ssh disconnected
ssh connected
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (491)
ssh in: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Build Time: Apr 5 2018 01:57:25
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 305]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 305]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 305]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "name" : "MyHyperionConfig",
ssh in: "output" : "/dev/spidev0.0",
ssh in: "rate" : 500000,
ssh in: "type" : "ws2801"
ssh in: }
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.15 (39)
ssh in: BLACKBORDER INFO: mode:default
ssh in: started
ssh in: INFO: Json server created and started on port 19444
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.15 (39)
ssh in: BLACKBORDER INFO: mode:default
ssh in: INFO: Frame grabber created and started
ssh in: terminate called after throwing an instance of 'std::runtime_error'
ssh in: what(): V4L2GRABBER ERROR: Cannot identify '/dev/video0' ERROR 2, No such file or directory
ssh in: Aborted