Hello,
my APA102 led strip dont light. I´m using 6 led´s to test it and I soldered all cables direct on the Pi.
RPi Zero + APA102
- Marcel1603
- Erledigt
-
-
hast du spi per raspi-config aktiviert?
-
hast du spi per raspi-config aktiviert?
Ja spi ist aktiviert.
Ich habe rausgefunden, dass ich per Hypercon das Strip einfabig zum leuchten bringen und mit "hyperion-remote -c +farbe " in Putty, aber die Effekte funktionieren nicht.
z.B. passiert bei "hyperion-remote -e snake" nicht. Deshalb dachte ich auch, dass die LEDs nicht leuchten, weil kein Starteffekt funktioniert. -
Ich habe jetzt den Grabber in der Config aktiviert und an den Pi angeschlossen und jetzt leuchtet nichts mehr und Hyperion startet nicht.
[MEDIA=pastebin]aUYbDVbe[/MEDIA] -
was sagt den 'lsusb' und 'v4l2-ctl --all'
-
lsusb:
Bus 001 Device 002: ID 18ec:5555 Arkmicro Technologies Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubv4l2-ctl --all:
[MEDIA=pastebin]iPPcMgww[/MEDIA] -
-
bcm2835-codec-decode (platform:bcm2835-codec):
/dev/video10
/dev/video11
/dev/video12USB2.0 PC CAMERA (usb-20980000.usb-1):
/dev/video0
/dev/video1 -
Dann stell doch bitte mal auf /dev/video1 um in deiner config.
https://prnt.sc/pos8xx -
Hyperion Ambilight Deamon (623)
Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
Build Time: Aug 25 2019 10:39:29
INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
HYPERION INFO: ColorTransform 'default' => [0; 5]
HYPERION INFO: ColorCorrection 'default' => [0; 5]
HYPERION INFO: ColorAdjustment 'default' => [0; 5]
LEDDEVICE INFO: configuration:
{
"colorOrder" : "bgr",
"name" : "MyHyperionConfig",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"type" : "apa102"
}INFO: Creating linear smoothing
HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
EFFECTENGINE INFO: Initializing Python interpreter
INFO: Hyperion started and initialised
INFO: Boot sequence 'Snake' EFFECTENGINE INFO: run effect Snake on channel 0
BLACKBORDER INFO: threshold set to 0 (0)
BLACKBORDER INFO: mode:default
started
INFO: Json server created and started on port 19444
INFO: Proto server created and started on port 19445
terminate called after throwing an instance of 'std::runtime_error'
what(): VIDIOC_S_INPUT ERROR 25, Inappropriate ioctl for device
Aborted -
Dann stell mal wieder auf video0 um und starte hyperion mit root (sudo) rechten.
-
sudo ./hyperiond /etc/hyperion/hyperion.config.json
Hyperion Ambilight Deamon (590)
Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
Build Time: Aug 25 2019 10:39:29
INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
HYPERION INFO: ColorTransform 'default' => [0; 5]
HYPERION INFO: ColorCorrection 'default' => [0; 5]
HYPERION INFO: ColorAdjustment 'default' => [0; 5]
LEDDEVICE INFO: configuration:
{
"colorOrder" : "bgr",
"name" : "MyHyperionConfig",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"type" : "apa102"
}INFO: Creating linear smoothing
HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
EFFECTENGINE INFO: Initializing Python interpreter
INFO: Hyperion started and initialised
INFO: Boot sequence 'Snake' EFFECTENGINE INFO: run effect Snake on channel 0
BLACKBORDER INFO: threshold set to 0 (0)
BLACKBORDER INFO: mode:default
started
INFO: Json server created and started on port 19444
INFO: Proto server created and started on port 19445
terminate called after throwing an instance of 'std::runtime_error'
what(): VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
Aborted -
Lies dir mal diesen Thread durch:
https://hyperion-project.org/t…icro-easycap-support.578/ -
soll ich dann das ausführen?:
aptitude remove ~nlinux-dtb ~nlinux-u-boot ~nlinux-image ~nlinux-headers
aptitude remove ~nlinux-firmware ~narmbian-firmware ~nlinux-$(lsb_release -cs)-root
Proceed with install:Code:
apt-get install linux-image-dev-sun8i linux-dtb-dev-sun8i linux-headers-dev-sun8i
apt-get install linux-u-boot-orangepizero-dev linux-$(lsb_release -cs)-root-dev-orangepizero
apt-get install armbian-firmware sunxi-tools swconfig a10disp
reboot -
oder soll ich einen anderen Grabber kaufen?
würde dieser funktionieren? -
Nein. Das ist zum compilieren eines kernels für den H3-basierenden OrangePi Plus.
Es scheint so das dieser USB Grabber nicht richtig unter Linux funktioniert. -
Scheint ok zu sein
https://prnt.sc/posi16 -
Scheint ok zu sein
https://prnt.sc/posi16
Ok werde den dann mal Bestellen und mich melden wenn ich ihn getestet habe. -
Hallo, habe jetzt den neuen Grabber angeschlossen und wenn ich Hyperion per Putty starten wll kommt das:
[MEDIA=pastebin]LdN76dCm[/MEDIA] -
v4l2-ctl --all
[MEDIA=pastebin]Y1fmLeqJ[/MEDIA]
v4l2-ctl --list-devices
[MEDIA=pastebin]1KfGMfZy[/MEDIA]
lsusb
[MEDIA=pastebin]FzDGLTp3[/MEDIA]
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!