1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rpi3B+/arduino/w2812b issues

Discussion in 'Hyperion General' started by Stepan, 15 April 2019.

  1. Stepan

    Stepan New Member

    Messages:
    7
    Hardware:
    RPi3, 32/64bit, +Arduino
    Hello all, seen this awesome project with arduino ar raspberry pi with Hyperion and projecting back light on TV, thought will try....

    Raspberry pi through usb connected to arduino and video device, then leds controlled by arduino and video converter in there hdmi 2 av and then splitter as well.

    I got OSMC latest version installed and Hyperion configured. When i connect and start i have light pink or whites leflashes and the it will go black.

    Trying to send color for demo and test getting message Unable to connect to host.

    Can anybody give any assistance please?
     
  2. Arakon

    Arakon Member

    Messages:
    109
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    Do you intend to use the raspberry as media player, or only for Hyperion alone? If the latter, I'd recommend using Hyperion standalone on a stretch lite image rather than OSMC.
    Unable to connect to host points to Hyperion not even running properly, or not configured right.
    Either way, the Arduino should play a color sequence on power up without any influence from the raspberry already, so if that fails, your sketch or sketch settings for the arduino are wrong in the first place, or the wiring of the arduino is.

    Without some additional logs, config files and what sketch you used, all we can do is guess.
     
  3. Stepan

    Stepan New Member

    Messages:
    7
    Hardware:
    RPi3, 32/64bit, +Arduino
    Thanks for quick reply Arakon,

    Could you explain benefits of using just raspberry alone? As i thought split load on arduino and raspberry will be more quicker.
    If it is better could you link me please to how to example that i could retry of doing my project

    I got smart TV so i use raspberry just for hyperion and arduino just controls LED

    Hyperion is configured by basics nothing special, please see attached pictures.
    http://prntscr.com/ncb6yg (Hardware)
    http://prntscr.com/ncb76n (Grabber)

    I am runing 258 LED on my TV and arduino sketch as follow:
    Code:
    #include "FastLED.h"
    
    #define ANALOG_MODE_AVERAGE  0
    #define ANALOG_MODE_LAST_LED 1
    
    /**************************************
       S E T U P
       set following values to your needs
    **************************************/
    
    #define INITIAL_LED_TEST_ENABLED true
    #define INITIAL_LED_TEST_BRIGHTNESS 32  // 0..255
    #define INITIAL_LED_TEST_TIME_MS 3000  // 10..
    
    // Number of leds in your strip. set to "1" and ANALOG_OUTPUT_ENABLED to "true" to activate analog only
    // As of 26/1/2017:
    // 582 leaves ZERO bytes free and this
    // 410 is ok
    // tested with 500 leds and is fine (despite the warning)
    #define MAX_LEDS 258
    
    // type of your led controller, possible values, see below
    #define LED_TYPE WS2812B
    
    // 3 wire (pwm): NEOPIXEL BTM1829 TM1812 TM1809 TM1804 TM1803 UCS1903 UCS1903B UCS1904 UCS2903 WS2812 WS2852
    //               S2812B SK6812 SK6822 APA106 PL9823 WS2811 WS2813 APA104 WS2811_40 GW6205 GW6205_40 LPD1886 LPD1886_8BIT
    // 4 wire (spi): LPD8806 WS2801 WS2803 SM16716 P9813 APA102 SK9822 DOTSTAR
    
    // For 3 wire led stripes line Neopixel/Ws2812, which have a data line, ground, and power, you just need to define DATA_PIN.
    // For led chipsets that are SPI based (four wires - data, clock, ground, and power), both defines DATA_PIN and CLOCK_PIN are needed
    
    // DATA_PIN, or DATA_PIN, CLOCK_PIN
    #define LED_PINS 6        // 3 wire leds
    //#define LED_PINS 6, 13  // 4 wire leds
    
    #define COLOR_ORDER GRB  // colororder of the stripe, set RGB in hyperion
    
    #define OFF_TIMEOUT 15000    // ms to switch off after no data was received, set 0 to deactivate
    
    // analog rgb uni color led stripe - using of hyperion smoothing is recommended
    // ATTENTION  this pin config is default for atmega328 based arduinos, others might work to
    //            if you have flickering analog leds this might be caused by unsynced pwm signals
    //            try other pins is more or less the only thing that helps
    #define ANALOG_OUTPUT_ENABLED false
    #define ANALOG_MODE           ANALOG_MODE_LAST_LED  // use ANALOG_MODE_AVERAGE or ANALOG_MODE_LAST_LED
    #define ANALOG_GROUND_PIN     8                     // additional ground pin to make wiring a bit easier
    #define ANALOG_RED_PIN        9
    #define ANALOG_GREEN_PIN      10
    #define ANALOG_BLUE_PIN       11
    
    // overall color adjustments
    #define ANALOG_BRIGHTNESS_RED   255              // maximum brightness for analog 0-255
    #define ANALOG_BRIGHTNESS_GREEN 255              // maximum brightness for analog 0-255
    #define ANALOG_BRIGHTNESS_BLUE  255              // maximum brightness for analog 0-255
    
    #define BRIGHTNESS 255                      // maximum brightness 0-255
    #define DITHER_MODE BINARY_DITHER           // BINARY_DITHER or DISABLE_DITHER
    #define COLOR_TEMPERATURE CRGB(255,255,255) // RGB value describing the color temperature
    #define COLOR_CORRECTION  TypicalLEDStrip   // predefined fastled color correction
    //#define COLOR_CORRECTION  CRGB(255,255,255) // or RGB value describing the color correction
    
    // Baudrate, higher rate allows faster refresh rate and more LEDs
    //#define serialRate 460800      // use 115200 for ftdi based boards
    #define serialRate 115200      // use 115200 for ftdi based boards
    //#define serialRate 500000         // use 115200 for ftdi based boards
    
    
    /**************************************
       A D A L I G H T   C O D E
       no user changes needed
    **************************************/
    
    // Adalight sends a "Magic Word" (defined in /etc/boblight.conf) before sending the pixel data
    uint8_t prefix[] = {'A', 'd', 'a'}, hi, lo, chk, i;
    
    unsigned long endTime;
    
    // Define the array of leds
    CRGB leds[MAX_LEDS];
    
    // set rgb to analog led stripe
    void showAnalogRGB(const CRGB& led) {
      if (ANALOG_OUTPUT_ENABLED) {
        byte r = map(led.r, 0,255,0,ANALOG_BRIGHTNESS_RED);
        byte g = map(led.g, 0,255,0,ANALOG_BRIGHTNESS_GREEN);
        byte b = map(led.b, 0,255,0,ANALOG_BRIGHTNESS_BLUE);
        analogWrite(ANALOG_RED_PIN  , r);
        analogWrite(ANALOG_GREEN_PIN, g);
        analogWrite(ANALOG_BLUE_PIN , b);
      }
    }
    
    // set color to all leds
    void showColor(const CRGB& led) {
      #if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
      LEDS.showColor(led);
      #endif
      showAnalogRGB(led);
    }
    
    // switch of digital and analog leds
    void switchOff() {
      #if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
      memset(leds, 0, MAX_LEDS * sizeof(struct CRGB));
      FastLED.show();
      #endif
      showAnalogRGB(leds[0]);
    }
    
    // function to check if serial data is available
    // if timeout occured leds switch of, if configured
    bool checkIncommingData() {
      boolean dataAvailable = true;
      while (!Serial.available()) {
        if ( OFF_TIMEOUT > 0 && endTime < millis()) {
          switchOff();
          dataAvailable = false;
          endTime = millis() + OFF_TIMEOUT;
        }
      }
    
      return dataAvailable;
    }
    
    // main function that setups and runs the code
    void setup() {
      Serial.begin(serialRate);
    
      // analog output
      if (ANALOG_OUTPUT_ENABLED) {
        // additional ground pin to make wiring a bit easier
        pinMode(ANALOG_GROUND_PIN, OUTPUT);
        digitalWrite(ANALOG_GROUND_PIN, LOW);
        pinMode(ANALOG_BLUE_PIN , OUTPUT);
        pinMode(ANALOG_RED_PIN  , OUTPUT);
        pinMode(ANALOG_GREEN_PIN, OUTPUT);
      }
    
      int ledCount = MAX_LEDS;
      if (ANALOG_MODE == ANALOG_MODE_LAST_LED) {
        ledCount--;
      }
    
      #if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
        FastLED.addLeds<LED_TYPE, LED_PINS, COLOR_ORDER>(leds, ledCount);
      #endif
    
      // color adjustments
      FastLED.setBrightness ( BRIGHTNESS );
      FastLED.setTemperature( COLOR_TEMPERATURE );
      FastLED.setCorrection ( COLOR_CORRECTION );
      FastLED.setDither     ( DITHER_MODE );
    
      // initial RGB flash
      #if INITIAL_LED_TEST_ENABLED == true
      for (int v=0;v<INITIAL_LED_TEST_BRIGHTNESS;v++)
      {
        showColor(CRGB(v,v,v));
        delay(INITIAL_LED_TEST_TIME_MS/2/INITIAL_LED_TEST_BRIGHTNESS);
      }
      for (int v=0;v<INITIAL_LED_TEST_BRIGHTNESS;v++)
      {
        showColor(CRGB(v,v,v));
        delay(INITIAL_LED_TEST_TIME_MS/2/INITIAL_LED_TEST_BRIGHTNESS);
      }
      #endif
      showColor(CRGB(0, 0, 0));
    
      Serial.print("Ada\n"); // Send "Magic Word" string to host
    
    
      boolean transmissionSuccess;
      unsigned long sum_r, sum_g, sum_b;
    
      // loop() is avoided as even that small bit of function overhead
      // has a measurable impact on this code's overall throughput.
      for(;;) {
        // wait for first byte of Magic Word
        for (i = 0; i < sizeof prefix; ++i) {
          // If next byte is not in Magic Word, the start over
          if (!checkIncommingData() || prefix[i] != Serial.read()) {
            i = 0;
          }
        }
    
        // Hi, Lo, Checksum
        if (!checkIncommingData()) continue;
        hi = Serial.read();
        if (!checkIncommingData()) continue;
        lo = Serial.read();
        if (!checkIncommingData()) continue;
        chk = Serial.read();
    
        // if checksum does not match go back to wait
        if (chk != (hi ^ lo ^ 0x55)) continue;
    
        memset(leds, 0, MAX_LEDS * sizeof(struct CRGB));
        transmissionSuccess = true;
        sum_r = 0;
        sum_g = 0;
        sum_b = 0;
    
        int num_leds = min ( MAX_LEDS, (hi<<8) + lo + 1 );
    
        // read the transmission data and set LED values
        for (int idx = 0; idx < num_leds; idx++) {
          byte r, g, b;
          if (!checkIncommingData()) {
            transmissionSuccess = false;
            break;
          }
          r = Serial.read();
          if (!checkIncommingData()) {
            transmissionSuccess = false;
            break;
          }
          g = Serial.read();
          if (!checkIncommingData()) {
            transmissionSuccess = false;
            break;
          }
          b = Serial.read();
          leds[idx].r = r;
          leds[idx].g = g;
          leds[idx].b = b;
          #if ANALOG_OUTPUT_ENABLED == true && ANALOG_MODE == ANALOG_MODE_AVERAGE
              sum_r += r;
              sum_g += g;
              sum_b += b;
          #endif
        }
    
        // shows new values
        if (transmissionSuccess) {
          endTime = millis() + OFF_TIMEOUT;
          #if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
          FastLED.show();
          #endif
    
          #if ANALOG_OUTPUT_ENABLED == true
            #if ANALOG_MODE == ANALOG_MODE_LAST_LED
              showAnalogRGB(leds[MAX_LEDS-1]);
            #else
              showAnalogRGB(CRGB(sum_r/MAX_LEDS, sum_g/MAX_LEDS, sum_b/MAX_LEDS));
             #endif
          #endif
        }
      }
    } // end of setup
    
    void loop() {
      // Not used. See note in setup() function.
    }

    I know that i use ttyUSB0 and video0 by searching it through PuTTY ls -l /dev/*USB* and ls -l /dev/*video*


    When i power up first by pluging mu 5v power supply and raspberry after i will get led sequence working after that in Hyperion if i click start i will get diferent sequence led playing than before so i dont know what they should mean.

    I am attaching as well log file from my session:

    Code:
    SSH Traffic:
    ssh connected
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     cd /tmp && wget -nv -N https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
    ssh out:     Last-modified header missing -- time-stamps turned off.
    ssh out:     2019-04-14 20:28:16 URL:https://raw.githubusercontent.com/hyperion-project/hyperion/master/bin/install_hyperion.sh [14552/14552] -> "install_hyperion.sh" [1]
    ssh in:     *******************************************************************************
    ssh in:     This script will install/update Hyperion Ambient Light
    ssh in:     Created by brindosch - hyperion-project.org - the official Hyperion source.
    ssh in:     *******************************************************************************
    ssh in:     ---> Stop Hyperion, if necessary
    ssh in:     ---> Install/Update Hyperion dependencies (This may take a while)
    ssh out:     debconf: unable to initialize frontend: Dialog
    ssh out:     debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
    ssh out:     debconf: falling back to frontend: Readline
    ssh out:     debconf: unable to initialize frontend: Readline
    ssh out:     debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 21.)
    ssh out:     debconf: falling back to frontend: Teletype
    ssh out:     dpkg-preconfigure: unable to re-open stdin:
    ssh in:     Selecting previously unselected package fontconfig.
    ssh in:     (Reading database ...
    ssh in:     (Reading database ... 5%
    ssh in:     (Reading database ... 10%
    ssh in:     (Reading database ... 15%
    ssh in:     (Reading database ... 20%
    ssh in:     (Reading database ... 25%
    ssh in:     (Reading database ... 30%
    ssh in:     (Reading database ... 35%
    ssh in:     (Reading database ... 40%
    ssh in:     (Reading database ... 45%
    ssh in:     (Reading database ... 50%
    ssh in:     (Reading database ... 55%
    ssh in:     (Reading database ... 60%
    ssh in:     (Reading database ... 65%
    ssh in:     (Reading database ... 70%
    ssh in:     (Reading database ... 75%
    ssh in:     (Reading database ... 80%
    ssh in:     (Reading database ... 85%
    ssh in:     (Reading database ... 90%
    ssh in:     (Reading database ... 95%
    ssh in:     (Reading database ... 100%
    ssh in:     (Reading database ... 23428 files and directories currently installed.)
    ssh in:     Preparing to unpack .../00-fontconfig_2.11.0-6.7+b1_armhf.deb ...
    ssh in:     Unpacking fontconfig (2.11.0-6.7+b1) ...
    ssh in:     Selecting previously unselected package libxau6:armhf.
    ssh in:     Preparing to unpack .../01-libxau6_1%3a1.0.8-1_armhf.deb ...
    ssh in:     Unpacking libxau6:armhf (1:1.0.8-1) ...
    ssh in:     Selecting previously unselected package x11-common.
    ssh in:     Preparing to unpack .../02-x11-common_1%3a7.7+19_all.deb ...
    ssh in:     Unpacking x11-common (1:7.7+19) ...
    ssh in:     Selecting previously unselected package libice6:armhf.
    ssh in:     Preparing to unpack .../03-libice6_2%3a1.0.9-2_armhf.deb ...
    ssh in:     Unpacking libice6:armhf (2:1.0.9-2) ...
    ssh in:     Selecting previously unselected package libsm6:armhf.
    ssh in:     Preparing to unpack .../04-libsm6_2%3a1.2.2-1+b3_armhf.deb ...
    ssh in:     Unpacking libsm6:armhf (2:1.2.2-1+b3) ...
    ssh in:     Selecting previously unselected package libxdmcp6:armhf.
    ssh in:     Preparing to unpack .../05-libxdmcp6_1%3a1.1.2-3_armhf.deb ...
    ssh in:     Unpacking libxdmcp6:armhf (1:1.1.2-3) ...
    ssh in:     Selecting previously unselected package libxcb1:armhf.
    ssh in:     Preparing to unpack .../06-libxcb1_1.12-1_armhf.deb ...
    ssh in:     Unpacking libxcb1:armhf (1.12-1) ...
    ssh in:     Selecting previously unselected package libx11-data.
    ssh in:     Preparing to unpack .../07-libx11-data_2%3a1.6.4-3+deb9u1_all.deb ...
    ssh in:     Unpacking libx11-data (2:1.6.4-3+deb9u1) ...
    ssh in:     Selecting previously unselected package libx11-6:armhf.
    ssh in:     Preparing to unpack .../08-libx11-6_2%3a1.6.4-3+deb9u1_armhf.deb ...
    ssh in:     Unpacking libx11-6:armhf (2:1.6.4-3+deb9u1) ...
    ssh in:     Selecting previously unselected package libxt6:armhf.
    ssh in:     Preparing to unpack .../09-libxt6_1%3a1.1.5-1_armhf.deb ...
    ssh in:     Unpacking libxt6:armhf (1:1.1.5-1) ...
    ssh in:     Selecting previously unselected package libaudio2:armhf.
    ssh in:     Preparing to unpack .../10-libaudio2_1.9.4-5+b1_armhf.deb ...
    ssh in:     Unpacking libaudio2:armhf (1.9.4-5+b1) ...
    ssh in:     Selecting previously unselected package libmng1:armhf.
    ssh in:     Preparing to unpack .../11-libmng1_1.0.10+dfsg-3.1+b5_armhf.deb ...
    ssh in:     Unpacking libmng1:armhf (1.0.10+dfsg-3.1+b5) ...
    ssh in:     Selecting previously unselected package qtcore4-l10n.
    ssh in:     Preparing to unpack .../12-qtcore4-l10n_4%3a4.8.7+dfsg-11_all.deb ...
    ssh in:     Unpacking qtcore4-l10n (4:4.8.7+dfsg-11) ...
    ssh in:     Selecting previously unselected package libqtcore4:armhf.
    ssh in:     Preparing to unpack .../13-libqtcore4_4%3a4.8.7+dfsg-11_armhf.deb ...
    ssh in:     Unpacking libqtcore4:armhf (4:4.8.7+dfsg-11) ...
    ssh in:     Selecting previously unselected package libqt4-xml:armhf.
    ssh in:     Preparing to unpack .../14-libqt4-xml_4%3a4.8.7+dfsg-11_armhf.deb ...
    ssh in:     Unpacking libqt4-xml:armhf (4:4.8.7+dfsg-11) ...
    ssh in:     Selecting previously unselected package libqtdbus4:armhf.
    ssh in:     Preparing to unpack .../15-libqtdbus4_4%3a4.8.7+dfsg-11_armhf.deb ...
    ssh in:     Unpacking libqtdbus4:armhf (4:4.8.7+dfsg-11) ...
    ssh in:     Selecting previously unselected package libqt4-network:armhf.
    ssh in:     Preparing to unpack .../16-libqt4-network_4%3a4.8.7+dfsg-11_armhf.deb ...
    ssh in:     Unpacking libqt4-network:armhf (4:4.8.7+dfsg-11) ...
    ssh in:     Selecting previously unselected package libxext6:armhf.
    ssh in:     Preparing to unpack .../17-libxext6_2%3a1.3.3-1+b2_armhf.deb ...
    ssh in:     Unpacking libxext6:armhf (2:1.3.3-1+b2) ...
    ssh in:     Selecting previously unselected package libxrender1:armhf.
    ssh in:     Preparing to unpack .../18-libxrender1_1%3a0.9.10-1_armhf.deb ...
    ssh in:     Unpacking libxrender1:armhf (1:0.9.10-1) ...
    ssh in:     Selecting previously unselected package libqtgui4:armhf.
    ssh in:     Preparing to unpack .../19-libqtgui4_4%3a4.8.7+dfsg-11_armhf.deb ...
    ssh in:     Unpacking libqtgui4:armhf (4:4.8.7+dfsg-11) ...
    ssh in:     Selecting previously unselected package libusb-1.0-0:armhf.
    ssh in:     Preparing to unpack .../20-libusb-1.0-0_2%3a1.0.21-1_armhf.deb ...
    ssh in:     Unpacking libusb-1.0-0:armhf (2:1.0.21-1) ...
    ssh in:     Setting up libmng1:armhf (1.0.10+dfsg-3.1+b5) ...
    ssh in:     Setting up qtcore4-l10n (4:4.8.7+dfsg-11) ...
    ssh in:     Setting up libusb-1.0-0:armhf (2:1.0.21-1) ...
    ssh in:     Processing triggers for libc-bin (2.24-11+deb9u3) ...
    ssh in:     Setting up libqtcore4:armhf (4:4.8.7+dfsg-11) ...
    ssh in:     Processing triggers for systemd (232-25+deb9u6) ...
    ssh in:     Setting up libxdmcp6:armhf (1:1.1.2-3) ...
    ssh in:     Setting up x11-common (1:7.7+19) ...
    ssh in:     debconf: unable to initialize frontend: Dialog
    ssh in:     debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
    ssh in:     debconf: falling back to frontend: Readline
    ssh in:     debconf: unable to initialize frontend: Readline
    ssh in:     debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/arm-linux-gnueabihf/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
    ssh in:     debconf: falling back to frontend: Teletype
    ssh in:     /var/lib/dpkg/info/x11-common.postinst: line 13: update-rc.d: command not found
    ssh in:     dpkg: error processing package x11-common (--configure):
    ssh in:      subprocess installed post-installation script returned error exit status 127
    ssh in:     Setting up libx11-data (2:1.6.4-3+deb9u1) ...
    ssh in:     Setting up libqt4-xml:armhf (4:4.8.7+dfsg-11) ...
    ssh in:     Setting up libxau6:armhf (1:1.0.8-1) ...
    ssh in:     Setting up fontconfig (2.11.0-6.7+b1) ...
    ssh in:     Regenerating fonts cache... done.
    ssh in:     dpkg: dependency problems prevent configuration of libice6:armhf:
    ssh in:      libice6:armhf depends on x11-common; however:
    ssh in:       Package x11-common is not configured yet.
    ssh in:     dpkg: error processing package libice6:armhf (--configure):
    ssh in:      dependency problems - leaving unconfigured
    ssh in:     dpkg: dependency problems prevent configuration of libxt6:armhf:
    ssh in:      libxt6:armhf depends on libice6 (>= 1:1.0.0); however:
    ssh in:       Package libice6:armhf is not configured yet.
    ssh in:     dpkg: error processing package libxt6:armhf (--configure):
    ssh in:      dependency problems - leaving unconfigured
    ssh in:     Setting up libqtdbus4:armhf (4:4.8.7+dfsg-11) ...
    ssh in:     Setting up libxcb1:armhf (1.12-1) ...
    ssh in:     dpkg: dependency problems prevent configuration of libaudio2:armhf:
    ssh in:      libaudio2:armhf depends on libxt6; however:
    ssh in:       Package libxt6:armhf is not configured yet.
    ssh in:     dpkg: error processing package libaudio2:armhf (--configure):
    ssh in:      dependency problems - leaving unconfigured
    ssh in:     dpkg: dependency problems prevent configuration of libsm6:armhf:
    ssh in:      libsm6:armhf depends on libice6 (>= 1:1.0.0); however:
    ssh in:       Package libice6:armhf is not configured yet.
    ssh in:     dpkg: error processing package libsm6:armhf (--configure):
    ssh in:      dependency problems - leaving unconfigured
    ssh in:     dpkg: dependency problems prevent configuration of libqtgui4:armhf:
    ssh in:      libqtgui4:armhf depends on libaudio2; however:
    ssh in:       Package libaudio2:armhf is not configured yet.
    ssh in:      libqtgui4:armhf depends on libice6 (>= 1:1.0.0); however:
    ssh in:       Package libice6:armhf is not configured yet.
    ssh in:      libqtgui4:armhf depends on libsm6; however:
    ssh in:       Package libsm6:armhf is not configured yet.
    ssh in:     dpkg: error processing package libqtgui4:armhf (--configure):
    ssh in:      dependency problems - leaving unconfigured
    ssh in:     Setting up libx11-6:armhf (2:1.6.4-3+deb9u1) ...
    ssh in:     Setting up libxrender1:armhf (1:0.9.10-1) ...
    ssh in:     Setting up libqt4-network:armhf (4:4.8.7+dfsg-11) ...
    ssh in:     Setting up libxext6:armhf (2:1.3.3-1+b2) ...
    ssh in:     Processing triggers for libc-bin (2.24-11+deb9u3) ...
    ssh in:     Processing triggers for systemd (232-25+deb9u6) ...
    ssh in:     Errors were encountered while processing:
    ssh in:      x11-common
    ssh in:      libice6:armhf
    ssh in:      libxt6:armhf
    ssh in:      libaudio2:armhf
    ssh in:      libsm6:armhf
    ssh in:      libqtgui4:armhf
    ssh out:     E: Sub-process /usr/bin/dpkg returned an error code (1)
    ssh in:     ---> Raspberry Pi found, but SPI is not set, we write "dtparam=spi=on" to /boot/config.txt
    ssh in:     ---> Downloading the appropriate Hyperion release
    ssh out:     2019-04-14 20:29:07 URL:https://netcologne.dl.sourceforge.net/project/hyperion-project/release/hyperion_rpi_osmc.tar.gz [1640849/1640849] -> "-" [1]
    ssh in:     ---> Installing systemd script
    ssh out:     Created symlink /etc/systemd/system/multi-user.target.wants/hyperion.service ¬ニメ /etc/systemd/system/hyperion.service.
    ssh in:     ---> Modify systemd script for OSMC usage
    ssh in:     ---> Starting Hyperion
    ssh in:     *******************************************************************************
    ssh in:     Hyperion Installation/Update finished!
    ssh in:     Please download the latest HyperCon version to benefit from new features!
    ssh in:     To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
    ssh in:     Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
    ssh in:     *******************************************************************************
    ssh in:     Rebooting now, we added dtparam=spi=on to config.txt
    ssh disconnected
    ssh connected
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null ; hyperion-v4l2 --device /dev/video0 --video-standard PAL --input 0 --width 1920 --height 1080 --crop-left 0 --crop-right 0 --crop-top 0 --crop-bottom 0 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --screenshot
    ssh in:     hyperion-v4l2:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:25
    ssh out:     VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    sftp getFile(./screenshot.png, java.awt.Image)
    ssh out:     hyperion-remote  -c ff2427
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     sudo journalctl -u hyperion.service 2>/dev/null
    ssh in:     -- Logs begin at Thu 2016-11-03 17:16:42 UTC, end at Sun 2019-04-14 20:38:12 UTC. --
    ssh in:     Apr 14 20:29:13 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:29:14 osmc hyperiond[313]: Hyperion Ambilight Deamon (313)
    ssh in:     Apr 14 20:29:14 osmc hyperiond[313]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:29:14 osmc hyperiond[313]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:29:14 osmc hyperiond[313]: ERROR: No valid config found
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:29:15 osmc hyperiond[420]: Hyperion Ambilight Deamon (420)
    ssh in:     Apr 14 20:29:15 osmc hyperiond[420]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:29:15 osmc hyperiond[420]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:29:15 osmc hyperiond[420]: ERROR: No valid config found
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:29:15 osmc hyperiond[422]: Hyperion Ambilight Deamon (422)
    ssh in:     Apr 14 20:29:15 osmc hyperiond[422]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:29:15 osmc hyperiond[422]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:29:15 osmc hyperiond[422]: ERROR: No valid config found
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:29:15 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:29:16 osmc hyperiond[425]: Hyperion Ambilight Deamon (425)
    ssh in:     Apr 14 20:29:16 osmc hyperiond[425]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:29:16 osmc hyperiond[425]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:29:16 osmc hyperiond[425]: ERROR: No valid config found
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:29:16 osmc hyperiond[427]: Hyperion Ambilight Deamon (427)
    ssh in:     Apr 14 20:29:16 osmc hyperiond[427]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:29:16 osmc hyperiond[427]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:29:16 osmc hyperiond[427]: ERROR: No valid config found
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:29:16 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
    ssh in:     Apr 14 20:29:17 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:29:17 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:29:17 osmc systemd[1]: hyperion.service: Start request repeated too quickly.
    ssh in:     Apr 14 20:29:17 osmc systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Apr 14 20:29:17 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:29:17 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: Hyperion Ambilight Deamon (823)
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: HYPERION INFO: ColorTransform 'default' => [0; 257]
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: HYPERION INFO: ColorCorrection 'default' => [0; 257]
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: HYPERION INFO: ColorAdjustment 'default' => [0; 257]
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: LEDDEVICE INFO: configuration:
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: {
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]:         "colorOrder" : "rgb",
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]:         "delayAfterConnect" : 0,
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]:         "name" : "MyHyperionConfig",
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]:         "output" : "/dev/ttyUSB0",
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]:         "rate" : 115200,
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]:         "type" : "adalight"
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: }
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: Opening UART: /dev/ttyUSB0
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: INFO: Creating linear smoothing
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: INFO: Hyperion started and initialised
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: started
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: INFO: Json server created and started on port 19444
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: INFO: Proto server created and started on port 19445
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: INFO: Frame grabber created and started
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Apr 14 20:31:05 osmc hyperiond[823]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: Hyperion Ambilight Deamon (832)
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: HYPERION INFO: ColorTransform 'default' => [0; 257]
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: HYPERION INFO: ColorCorrection 'default' => [0; 257]
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: HYPERION INFO: ColorAdjustment 'default' => [0; 257]
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: LEDDEVICE INFO: configuration:
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: {
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]:         "colorOrder" : "rgb",
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]:         "delayAfterConnect" : 0,
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]:         "name" : "MyHyperionConfig",
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]:         "output" : "/dev/ttyUSB0",
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]:         "rate" : 115200,
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]:         "type" : "adalight"
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: }
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: Opening UART: /dev/ttyUSB0
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: INFO: Creating linear smoothing
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: INFO: Hyperion started and initialised
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: started
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: INFO: Json server created and started on port 19444
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: INFO: Proto server created and started on port 19445
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: INFO: Frame grabber created and started
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Apr 14 20:31:05 osmc hyperiond[832]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:31:05 osmc systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: Hyperion Ambilight Deamon (839)
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: HYPERION INFO: ColorTransform 'default' => [0; 257]
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: HYPERION INFO: ColorCorrection 'default' => [0; 257]
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: HYPERION INFO: ColorAdjustment 'default' => [0; 257]
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: LEDDEVICE INFO: configuration:
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: {
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]:         "colorOrder" : "rgb",
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]:         "delayAfterConnect" : 0,
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]:         "name" : "MyHyperionConfig",
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]:         "output" : "/dev/ttyUSB0",
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]:         "rate" : 115200,
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]:         "type" : "adalight"
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: }
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: Opening UART: /dev/ttyUSB0
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: INFO: Creating linear smoothing
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: INFO: Hyperion started and initialised
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: started
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: INFO: Json server created and started on port 19444
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: INFO: Proto server created and started on port 19445
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: INFO: Frame grabber created and started
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Apr 14 20:31:06 osmc hyperiond[839]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: Hyperion Ambilight Deamon (846)
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: HYPERION INFO: ColorTransform 'default' => [0; 257]
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: HYPERION INFO: ColorCorrection 'default' => [0; 257]
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: HYPERION INFO: ColorAdjustment 'default' => [0; 257]
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: LEDDEVICE INFO: configuration:
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: {
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]:         "colorOrder" : "rgb",
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]:         "delayAfterConnect" : 0,
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]:         "name" : "MyHyperionConfig",
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]:         "output" : "/dev/ttyUSB0",
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]:         "rate" : 115200,
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]:         "type" : "adalight"
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: }
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: Opening UART: /dev/ttyUSB0
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: INFO: Creating linear smoothing
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: INFO: Hyperion started and initialised
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: started
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: INFO: Json server created and started on port 19444
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: INFO: Proto server created and started on port 19445
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: INFO: Frame grabber created and started
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Apr 14 20:31:06 osmc hyperiond[846]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: Started Hyperion Systemd service.
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: Hyperion Ambilight Deamon (853)
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]:         Build Time: Apr  5 2018 01:57:25
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: HYPERION INFO: ColorTransform 'default' => [0; 257]
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: HYPERION INFO: ColorCorrection 'default' => [0; 257]
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: HYPERION INFO: ColorAdjustment 'default' => [0; 257]
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: LEDDEVICE INFO: configuration:
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: {
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]:         "colorOrder" : "rgb",
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]:         "delayAfterConnect" : 0,
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]:         "name" : "MyHyperionConfig",
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]:         "output" : "/dev/ttyUSB0",
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]:         "rate" : 115200,
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]:         "type" : "adalight"
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: }
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: Opening UART: /dev/ttyUSB0
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: INFO: Creating linear smoothing
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: INFO: Hyperion started and initialised
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: started
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: INFO: Json server created and started on port 19444
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: INFO: Proto server created and started on port 19445
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: BLACKBORDER INFO: mode:default
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: INFO: Frame grabber created and started
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Apr 14 20:31:06 osmc hyperiond[853]:   what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:31:06 osmc systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in:     Apr 14 20:31:07 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
    ssh in:     Apr 14 20:31:07 osmc systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Apr 14 20:31:07 osmc systemd[1]: hyperion.service: Start request repeated too quickly.
    ssh in:     Apr 14 20:31:07 osmc systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Apr 14 20:31:07 osmc systemd[1]: hyperion.service: Unit entered failed state.
    ssh in:     Apr 14 20:31:07 osmc systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh disconnected
    ssh connected
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null ; hyperion-v4l2 --device /dev/video0 --video-standard PAL --input 1 --width 1920 --height 1080 --crop-left 0 --crop-right 0 --crop-top 0 --crop-bottom 0 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --screenshot
    ssh in:     hyperion-v4l2:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:25
    ssh out:     VIDIOC_S_INPUT ERROR 22, Invalid argument
    sftp getFile(./screenshot.png, java.awt.Image)
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh disconnected
    ssh connected
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null ; hyperion-v4l2 --device /dev/video0 --video-standard PAL --input 1 --width 1920 --height 1080 --crop-left 0 --crop-right 0 --crop-top 0 --crop-bottom 0 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --screenshot
    ssh in:     hyperion-v4l2:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:25
    ssh out:     VIDIOC_S_INPUT ERROR 22, Invalid argument
    sftp getFile(./screenshot.png, java.awt.Image)
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null ; hyperion-v4l2 --device /dev/video0 --video-standard PAL --input 1 --width 1920 --height 1080 --crop-left 0 --crop-right 0 --crop-top 0 --crop-bottom 0 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --screenshot
    ssh in:     hyperion-v4l2:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:25
    ssh out:     VIDIOC_S_INPUT ERROR 22, Invalid argument
    sftp getFile(./screenshot.png, java.awt.Image)
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh disconnected
    ssh connected
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote -u 1.0 -m 1.0 -n 0.1 -g "2.5 2.5 2.5" -t "0.0 0.0 0.0" -R "255 0 0" -G "0 255 0" -B "0 0 255" -Z "255 255 255"
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote -u 1.0 -m 1.0 -n 0.1 -g "2.5 2.5 2.5" -t "0.0 0.0 0.0" -R "255 0 0" -G "0 255 0" -B "0 0 255" -Z "255 255 255"
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote -u 1.0 -m 1.0 -n 0.1 -g "2.5 2.5 2.5" -t "0.0 0.0 0.0" -R "255 0 0" -G "0 255 0" -B "0 0 255" -Z "255 255 255"
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh disconnected
    ssh connected
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff2a
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff29
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff29
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff29
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff29
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff29
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff29
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c 30ff29
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    
     
  4. Arakon

    Arakon Member

    Messages:
    109
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    Sorry, what I meant was not to use OSMC, since there's no point to using a full blown media player if you just need the Hyperion functionality.
    i.e. grab this image:


    And use that on the Pi. That's a basic linux with just the needed stuff for Hyperion.
     
  5. Stepan

    Stepan New Member

    Messages:
    7
    Hardware:
    RPi3, 32/64bit, +Arduino
    I will give it a go tomorrow and tell you how it is going.

    Thanks for giving me right direction.
     
  6. Stepan

    Stepan New Member

    Messages:
    7
    Hardware:
    RPi3, 32/64bit, +Arduino
    Ok so i dropped an image to my sd card, but you will have to guide me through this one.

    Does this image have all libraries installed already or i need to update them?
    Is it preconfigurated, or all configurations need to be done? If so then where should i look for config file?

    I think that is the main questions i have so far.
    Thanks
     
  7. Arakon

    Arakon Member

    Messages:
    109
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    It's working out of the box, you just need to configure your config file to match your setup (LED type, number, connection type, etc).
    The config ist in the default hyperion folder, root -> etc/hyperion/hyperion.config.json
     
  8. Stepan

    Stepan New Member

    Messages:
    7
    Hardware:
    RPi3, 32/64bit, +Arduino
    Right buddy, installed image, connected to wifi, somehow managed to get it half way to english and connected with hyperion.
    Installed hyperion, loaded config and after started again.
    Unfortinetly i still doesn't work.

    Please see config attached:

    Code:
    // Automatically generated configuration file for Hyperion ambilight daemon
    // Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)
    // Generated by: HyperCon (The Hyperion deamon configuration file builder)
    // Created with HyperCon V1.03.3 (22.10.2017)
    
    {
        // DEVICE CONFIGURATION
        "device" :
        {
            "name"       : "MyHyperionConfig",
            "type"       : "adalight",
            "output"     : "/dev/ttyUSB0",
            "rate"     : 115200,
            "delayAfterConnect"     : 0,
            "colorOrder" : "rgb"
        },
    
        // COLOR CALIBRATION CONFIG
        "color" :
        {
            "channelAdjustment" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "pureRed" :
                    {
                        "redChannel"        : 255,
                        "greenChannel"        : 0,
                        "blueChannel"        : 0
                    },
                    "pureGreen" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 255,
                        "blueChannel"        : 0
                    },
                    "pureBlue" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 0,
                        "blueChannel"        : 255
                    }
                }
            ],
            "temperature" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "correctionValues" :
                    {
                        "red"     : 255,
                        "green"    : 255,
                        "blue"     : 255
                    }
                }
            ],
            "transform" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "hsl" :
                    {
                        "saturationGain"    : 1.0000,
                        "luminanceGain"        : 1.0000,
                        "luminanceMinimum"        : 0.1000
                    },
                    "red" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    },
                    "green" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    },
                    "blue" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    }
                }
            ],
        // SMOOTHING CONFIG
            "smoothing" :
            {
                "type"            : "linear",
                "time_ms"         : 200,
                "updateFrequency" : 30.0000,
                "updateDelay"     : 0
            }
        },
    
        // V4L2 GRABBER CONFIG
        "grabber-v4l2" :
        {
            "device" : "/dev/video0",
            "input" : 0,
            "standard" : "PAL",
            "width" : 1,
            "height" : 1,
            "frameDecimation" : 2,
            "sizeDecimation" : 4,
            "priority" : 800,
            "mode" : "2D",
            "cropLeft" : 5,
            "cropRight" : 9,
            "cropTop" : 9,
            "cropBottom" : 13,
            "redSignalThreshold" : 0.4,
            "greenSignalThreshold" : 0.2,
            "blueSignalThreshold" : 1.0
        },
    
        // FRAME GRABBER CONFIG
        "framegrabber" :
        {
            "width" : 64,
            "height" : 64,
            "frequency_Hz" : 10.0,
            "priority" : 890
        },
    
        // BLACKBORDER CONFIG
        "blackborderdetector" :
        {
            "enable" : true,
            "threshold" : 0.0,
            "unknownFrameCnt" : 600,
            "borderFrameCnt" : 50,
            "maxInconsistentCnt" : 10,
            "blurRemoveCnt" : 1,
            "mode" : "default"
        },
    
        // BOOTEFFECT CONFIG
        "bootsequence" :
        {
            "color" : [0,0,0],
            "effect" : "Rainbow swirl fast",
            "duration_ms" : 3000,
            "priority" : 700
        },
    
        // JSON SERVER CONFIG
        "jsonServer" :
        {
            "port" : 19444
        },
    
        // PROTO SERVER CONFIG
        "protoServer" :
        {
            "port" : 19445
        },
    
        // EFFECT PATH
        "effects" :
        {
            "paths" :
            [
                "/storage/hyperion/effects",
                "/usr/share/hyperion/effects"
            ]
        },
    
        // NO KODI CHECK CONFIG
        // NO BOBLIGHT SERVER CONFIG
        // NO JSON/PROTO FORWARD CONFIG
    
    
        "endOfJson" : "endOfJson"
    }
    

    And this is the log of installing and testing:

    Code:
    ssh connected
    ssh out:     cd /tmp && wget -nv -N https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
    ssh out:     ᅡᄏLast-modifiedᅡᆱ-Kopfzeile fehlt -- Zeitstempel abgeschaltet.
    ssh out:     2019-04-17 22:52:07 URL:https://raw.githubusercontent.com/hyperion-project/hyperion/master/bin/install_hyperion.sh [14552/14552] -> "install_hyperion.sh" [1]
    ssh in:     *******************************************************************************
    ssh in:     This script will install/update Hyperion Ambient Light
    ssh in:     Created by brindosch - hyperion-project.org - the official Hyperion source.
    ssh in:     *******************************************************************************
    ssh in:     ---> Stop Hyperion, if necessary
    ssh in:     ---> Install/Update Hyperion dependencies (This may take a while)
    ssh in:     ---> Downloading the appropriate Hyperion release
    ssh out:     2019-04-17 22:52:30 URL:https://datapacket.dl.sourceforge.net/project/hyperion-project/release/hyperion_rpi.tar.gz [1640849/1640849] -> "-" [1]
    ssh in:     ---> Installing systemd script
    ssh in:     ---> Starting Hyperion
    ssh in:     *******************************************************************************
    ssh in:     Hyperion Installation/Update finished!
    ssh in:     Please download the latest HyperCon version to benefit from new features!
    ssh in:     To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
    ssh in:     Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
    ssh in:     *******************************************************************************
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    sftp Send Hyperion Config - Sourcepath: C:/Users/lebed/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote  -c 30ff29
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:05
    ssh out:     Unable to connect to host
    ssh out:     sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null ; hyperion-v4l2 --device /dev/video0 --video-standard PAL --input 0 --width 1 --height 1 --crop-left 5 --crop-right 9 --crop-top 9 --crop-bottom 13 --size-decimator 1 --frame-decimator 2 --red-threshold 0.4 --green-threshold 0.2 --blue-threshold 1.0 --screenshot
    ssh in:     hyperion-v4l2:
    ssh in:         version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
    ssh in:         build time: Apr  5 2018 01:57:25
    ssh out:     VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    sftp getFile(./screenshot.png, java.awt.Image)
    ssh disconnected
    

    My question what am i doing wrong? Any specific locations where hyperion needs to be installed? Or file needs to be moved manually to some diferent folder?
     
  9. Arakon

    Arakon Member

    Messages:
    109
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    Hypercon sometimes won't upload the config properly, check if /etc/hyperion contains the current hyperion.conf.json.
    If not, upload it manually using winscp, for example.

    Also, it doesn't seem to detect your capture device properly.

    Do you get the initial LED flash when you power it up? The LEDs should play some sort of color sequence if the arduino is working, and rainbow swirl sequence after if hyperion is working.
     
  10. Stepan

    Stepan New Member

    Messages:
    7
    Hardware:
    RPi3, 32/64bit, +Arduino
    I get light pink colour flash when i power up system 1st time and after i press start instead of rainbow sequence i get same colour but just diferent sequence flash. I cheked my config file and it is there and it seems to be that is the config i use.
    Hyperion knows LED sequence starting from 0 including it to my selected number 258 so in total i get 259 leds?
    Arduino does the same? Or arduino count starts from 1?
     
  11. Arakon

    Arakon Member

    Messages:
    109
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    The number of LEDs doesn't matter until it actually shows something. But yeah, arduino wants the real LED count, so 100 LEDs = 100 in Arduino.
    Are you sure the arduino is detected as ttyUSB0?
    Going by the hyperion log, there's still some sort of issue witht he video grabber. What exact model is it? Run "lsusb" and post the output here please.
     
  12. Stepan

    Stepan New Member

    Messages:
    7
    Hardware:
    RPi3, 32/64bit, +Arduino
    Here is the log after lsusb:
    Code:
    [email protected]:~ $ lsusb
    Bus 001 Device 004: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
    Bus 001 Device 006: ID 18ec:5555 Arkmicro Technologies Inc.
    Bus 001 Device 005: ID 0424:7800 Standard Microsystems Corp.
    Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
    Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    [email protected]:~ $
    
    As i understand Arkmicro is my video graber device, and i dont get which one is the arduino nano.
    For video capture i use EasyCAP device, dont know what processor is inside.
     
  13. Arakon

    Arakon Member

    Messages:
    109
    Hardware:
    RPi1/Zero, RPi3, +Arduino
    • Like Like x 2