Hello guys, I'm experiencing a really weird issue with hyperion. If I chose a static color like "red" in hyperion-remote, only the very first LED is showing the correct color. All following LEDs seem to show a random color. The first LED is red, 2nd is blue, 3rd green, 4th off, 5th red, ... The first one always shows the correct color. The strange thing is, that the ambilight is working perfectly with the USB grabber and also if I chose an effect via hyperion-remote everything is correct. My setup: Raspberry pi 3b / LibreElec 9.2.3 Hyperion ng 2.0.0-alpha.7 154 APA102 LEDs, 5V 10A PSU (only for the LED, Pi has USB power supply). I've connected the ground cable of the PSU with the LEDs and the Pi. I don't think that there is an issue with the LED connections, because grabber and effects are working well. Previously with another OS (Raspbian Lite + hyperion ng) everything worked well. So I think that this must be related to software / OS but I'm not sure. The static color issue also appears if I send commands via SSH to hyperion-remote. Here is the debug output of the command: LoggingCommand() | log streaming activated for client ::ffff:192.168.2.215 2020-07-30T11:06:06.876 hyperiond HYPERION : <DEBUG> PriorityMuxer.cpp:158:registerInput() | Register new input 'Web [email protected]::ffff:192.168.2.215/COLOR' with priority 1 as inactive 2020-07-30T11:06:06.876 hyperiond HYPERION : <DEBUG> PriorityMuxer.cpp:198:setInput() | Priority 1 is now active 2020-07-30T11:06:06.877 hyperiond HYPERION : <DEBUG> PriorityMuxer.cpp:333:setCurrentTime() | Set visible priority to 1 My config: Any help would be much appreciated, many thanks in advance!