Hi,
This is my first post here and i'm very stuck with my setup.
I get nothing from the LEDs (APA102) running Hyperbian on an RPi Zero W. I have enabled SPI on the Pi and have the Data into the LED strip connected to GPIO10 (SPI_MOSI) and the Clock line to GPIO11 (SPI_SCLK). Everything is being power my a 5v 10A power supply but both the Pi and the LED strip have a direct connection to the power and share the ground on a breadboard.
I just don't get any activity on the LED strip. I've tested the voltage with a multimeter and both the clock line and data line are showing 5v, which I don't think is a good thing.
Any direction would be appreciated, my current guess is i've done something the the strip to break it.
Thanks.