@Paulchen-Panther as a bit of a noob, how do I replace this hyperiond from the ssh terminal? What commands would I need? Would this work for apa102? As my Hyperion seems to work, but it kills my hdmi signal on the RPi4 if the program is installed.
RPI 4 Unable to initialize ws281x library.
- Astina
- Erledigt
-
-
Paulchen-Panther is possible to upload your modifier binary again? I have same problem as I'm using WS281x library on openelec but I'm unable to build it in openelec environment. (and cross compilation is not well documented in case of open elec to be understanded by me )
Thank you. -
@Mitch7391
I think the problem with the loss of the HDMI signal is due to the DispmanX implementation. The timing is not 100% the same. We can only wait until the RPi Foundation releases a new firmware for the RPi 4 that fixes the error.@GeorgesLab
Naturally. -
Naturally.Thank you very much, you are the Best. Excited waiting for new link I was able in meantime to compile new version of hyperion with updated library on raspbian, but I was not able to make static library to distribute binary to libreelec.
-
FYI:
- Download and install Raspbian Stretch
- Follow the CompileHowTo.txt up to here
- Clone your own Fork from Hyperion
- Update the rpi_281x submodule in this directory
- At this point in the CompileHowTo.txt deactivate the OpenCV HDMI Grabber with the switch '-DENABLE_OPENCV = OFF' (Screenshot)
- Create it with 'make -j $ (nproc)'
- That's it
Screens:
[MEDIA=googledrive]1Lz066Ub00ylF4elQhzsAXY0WiZkvR5TI[/MEDIA]
[MEDIA=googledrive]12AjGM7MBFujV2h7HJBh4sUjhfcV2NKmv[/MEDIA]BINARY:
https://github.com/Paulchen-Pa…/GeorgesLab/bin/hyperiond -
Thank you very much for howto. Well I do all pretty well but point number one I made all steps in raspbian buster. When I checked distro version on libreelec I was unable to decode that last version is based on stretch. I will try later myself just as point of learn. Now I will use your binary. I owe you beer Panther.
-
Yes, something went wrong when compiling.
I have manually specified the switches now.Before:
Now:
The new binary: hyperiond
Hi ,
I have a problem with running Hyperion.
on RPi I installed libreelec, from libreelec add-ons I install Hyperion9.2.SSH to RPi and when running hiperion.service got an error:
Codessh in: Unable to initialize ws281x library. ssh in: terminate called after throwing an instance of 'int'
Can you provide a new link with hyperiond binary ?
-
Hi ,
I have a problem with running Hyperion.
on RPi I installed libreelec, from libreelec add-ons I install Hyperion9.2.SSH to RPi and when running hiperion.service got an error:
Codessh in: Unable to initialize ws281x library. ssh in: terminate called after throwing an instance of 'int'
Can you provide a new link with hyperiond binary ?
Look here :
https://hyperion-project.org/t…ziell-unofficially.10463/ -
Thanks! it helped to install hyperian
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!