Moinsen zusammen,
ich nutze meinen Scart vom TV über ein S-VHS Kabel in den Grabber (Input 1).
CI/CI+ wird übrigens ausgegeben! (LG 55UF6809)
Soweit funktioniert alles 1a
Wenn ich in Kodi (PI3) einen Film/Serie usw. beende wird sofort auf den Grabber geschaltet.
Soweit so gut.
Allerdings flackern dann die LED´s schön ungleich, wie es der Gabber auch ausgibt (Screenshot ergibt einen Schneesturm). Solange der HDMI Eingang geschaltet ist, wird also kein Bild am Scart ausgegeben....
Sobald auf das TV Bild geschaltet wird, passt wieder alles.
Ist im Kodi Menü etwas nervig, da dies auch mal länger, ohne Nutzung, an ist.
Wo kann ich da drehen, oder muss ich damit leben?
Code
// Automatically generated configuration file for Hyperion ambilight daemon
// Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.03.1 (11.06.2016)
{
// DEVICE CONFIGURATION
"device" :
{
"name" : "Joschi",
"type" : "ws2801",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"colorOrder" : "rgb"
},
// COLOR CALIBRATION CONFIG
"color" :
{
"channelAdjustment" :
[
{
"id" : "default",
"leds" : "*",
"pureRed" :
{
"redChannel" : 255,
"greenChannel" : 3,
"blueChannel" : 0
},
"pureGreen" :
{
"redChannel" : 15,
"greenChannel" : 200,
"blueChannel" : 16
},
"pureBlue" :
{
"redChannel" : 26,
"greenChannel" : 10,
"blueChannel" : 200
}
}
],
"temperature" :
[
{
"id" : "default",
"leds" : "*",
"correctionValues" :
{
"red" : 255,
"green" : 250,
"blue" : 244
}
}
],
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsl" :
{
"saturationGain" : 1.0000,
"luminanceGain" : 1.0000,
"luminanceMinimum" : 0.0900
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
}
}
],
// SMOOTHING CONFIG
"smoothing" :
{
"type" : "linear",
"time_ms" : 200,
"updateFrequency" : 20.0000,
"updateDelay" : 0
}
},
// V4L2 GRABBER CONFIG
"grabber-v4l2" :
{
"device" : "/dev/video0",
"input" : 1,
"standard" : "PAL",
"width" : -1,
"height" : -1,
"frameDecimation" : 2,
"sizeDecimation" : 8,
"priority" : 900,
"mode" : "2D",
"cropLeft" : 15,
"cropRight" : 17,
"cropTop" : 10,
"cropBottom" : 7,
"redSignalThreshold" : 0.0,
"greenSignalThreshold" : 0.0,
"blueSignalThreshold" : 0.0
},
// FRAME GRABBER CONFIG
"framegrabber" :
{
"width" : 64,
"height" : 64,
"frequency_Hz" : 10.0,
"priority" : 890
},
// BLACKBORDER CONFIG
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.14,
"unknownFrameCnt" : 600,
"borderFrameCnt" : 50,
"maxInconsistentCnt" : 10,
"blurRemoveCnt" : 1,
"mode" : "osd"
},
// KODI CHECK CONFIG
"xbmcVideoChecker" :
{
"xbmcAddress" : "127.0.0.1",
"xbmcTcpPort" : 9090,
"grabVideo" : true,
"grabPictures" : true,
"grabAudio" : true,
"grabMenu" : false,
"grabPause" : true,
"grabScreensaver" : true,
"enable3DDetection" : true
},
// BOOTEFFECT CONFIG
"bootsequence" :
{
"color" : [0,0,0],
"effect" : "Rainbow swirl",
"duration_ms" : 3000,
"priority" : 700
},
// JSON SERVER CONFIG
"jsonServer" :
{
"port" : 19444
},
// PROTO SERVER CONFIG
"protoServer" :
{
"port" : 19445
},
// EFFECT PATH
"effects" :
{
"paths" :
[
"/storage/hyperion/effects",
"/usr/share/hyperion/effects"
]
},
// NO BOBLIGHT SERVER CONFIG
// NO JSON/PROTO FORWARD CONFIG
// LED CONFIGURATION
Alles anzeigen