Beiträge von TPmodding
-
-
Probiere es jetzt mal bitte.
-
From my assumption it should turn a logic high into a logic low ande vice versa but when activated this option the signal remains the same.
This should happen, right. but your config says ""invert": false," maybe the web-gui has some issues, did you saved or just ticked the box?
-
Are you connected to the pi?
-
looks awesome!
-
it would always require root, you need to grab the picture etc....but for samsungtvs etc it is very hard...best tvs are LG for now
i'm not sure if only installing the app on android tvs ar enough...still would need some modifications etc....sadly
-
bulb <- bridge <- hyperion
-
in der WebUI von WLED kann man ein Limit setzen, dort wird es eingetragen
-
Hi,
eine PM hätte es auch getan...
Technisch müsste ich extra eine neue Gruppe für dich anlegen etc. Habs einfach schnell gemacht
LG
-
Thanks for all your Support!
-
Needs additional circuits (MOSFETs). Needs 3 or 4 pins for 1 LED strip
-
-
For HyperHDR Support please use the platform from hyperHDR.
Thanks for your understanding.
Greetings
-
Hey everyone,
version 2.0.15 is released yesterday, huge thanks to Lord-Grey.
Hyperion's February and first 2023 release provides you with the latest updates and fixes.
Key new features: You can now stream to a dedicated WLED segment, put Hyperion in Suspend or Idle mode or apply dominant color rather than mean color processing.
Many thanks to @EliteScientist who contributed with an audio grabber which works as the other existing grabbers,
i.e. you can use the input feeding multiple instances in parallel or forward the input.
Again, any thanks to all contributors providing code or translations.
If you have installed hyperion.ng via our apt-repo you can update it with:
As backups are ALWAYS a good choice:
PLEASE BE PATIENT AND MAKE A BACKUP BEFORE UPGRADING! MAYBE YOUR CONFIG WILL NOT CORRECTLY MIGRATED!!
Changelog:
Added
- Audio Grabber to add audio visualization support for both Windows and Linux.
- Support streaming to individual WLED segments (requires WLED 0.13.3+). To allow segment streaming, enable "Realtime - Use main segment only" in WLED's Sync Interfaces setup screen
- Allow to keep WLED powered on after streaming and restoring state
- Allow to Disable / Enable all instances (#970) by
- Suspend/Resume support for Linux and Windows (#1493,#1282, #978).
Suspend/Resume/Restart is supported via API, UI, Systray and hyperion-remote - Idle scenario via Screen Locking (Linux/Windows), Screensaver invokation (Linux), hyperion-remote or API
In Idle, all instances, components will be disabled besides the output processing (LED-Devices, smoothing).
The current priorities will be cleared and the background effect per instance will be executed, if enabled. - Commands toogleSuspend and toggleIdle allow to flip between modes, e.g. might be used to trigger modes by a remote
- Suspend/Resume support for Linux and Windows (#1493,#1282, #978).
- Reduced pixel processing to reduce resources on big assignment areas
- Support for squared mean color processing
- Support for dominant color processing on assigned LED areas (#1382). A simple and advanced way is provided. Advanced and high accuracy might be combined with reduced pixel processing to lower CPU usage.
- Add instance# in API response (#1504)
- Suspend/Resume support for Linux and Windows (#1493,#1282, #978). Suspend/Resume/Restart is supported via API, UI, Systray and hyperion-remote
- Idle scenario via Screen Locking (Linux/Windows), Screensaver invokation (Linux), hyperion-remote or API In Idle, all instances, components will be disabled besides the output processing (LED-Devices, smoothing). The current priorities will be cleared and the background effect per instance will be executed, if enabled.
- Commands toogleSuspend and toggleIdle allow to flip between modes, e.g. might be used to trigger modes by a remote
Changed
- Renamed LED area assignment naming to provide clarity on the processing algorithms
- REST API: Increased default timeout to address "Operation cancelled" errors
- LED Devices: Allow to differentiate between recoverable/unrecoverable errors
Fixed
- Effects/Smoothing: Effects with dedicated smoothing settings will now run with those settings (even if general smoothing is off)
- No interim color update at WLED after streaming and turning off WLED
- LED-Matrix Layout: Add Cabling direction selection element again (#1566)
- Restart correctly, if running as service (#1368)
- Hue-Wizard: In case auto discovery failed, port 80 was not used as default (#1544)
- Send only one reply per Start Instance request (#1551)
- Add instance# in JSON-API replies (aligning to Add instance in websocket response to a subscription #1504 behaviour)
- hyperion-remote: Extracting reply for a configGet request correctly (#1555)
- Grabber fps setting was not applied correctly
- Smoothing: No empty updates
Technical
- Add CodeQL for GitHub code scanning
- Update to Protocol Buffers 3.21.12
- Update to Mbed TLS 3.3.0
- Qt6 alignments
- cmake support of libcec without version in lib-name
- Refactor for Python 3.11 deprecated functions
-
there is docker container, may this works?
-
Hey,
the library for ws281x is from https://github.com/jgarff/rpi_ws281x/ that would maybe so this maybe a reason why it wouldnt work on other boards.
if you dont want mess to much, may you should try an arduino/esp with adalight sketch connected via usb to your board
-
das macht nichts, das reicht vollkommen um es zu verarbeiten, mit dem faktor kannst du es noch einstellen, aber umso höher die auflösung umso mehr last hat man
-
Nein, hast du den auch im Web-Interface weitere einstellungen vorgenommen?
-
-