Btw this is my hyperion config
Beiträge von videxx
-
-
Now I tried a standart 5V 2A Phone power supply which suprisingly has clean 5V and again only the 3rd LED was on and the controling didn´t work. I think the LED stripe is broke.
-
Hi, so corrently I am about to dissable my old PC to get the PSU XD
Here are some pics to show my current wiring (with the "unclean" power supply, to give a better overview I took the same color for the jumper wires as the wires on the LED stripeCould it be possible that I destroed the chips by putting to much volt on it?
-
Is there any way to ground the power supply if i only have the + - out?
-
I have got a “normal” power adapter (amazon above). So i can’t really ground it to the raspberry. I have an old pc but i think it is 12V not 5
-
could you maybe explain that ground problem more specific
mesure: it put out 5.43V so maybe its that (is there any you can recommend, I have this one:
)
wiggle: wiggleing didn´t do anything
pressing: i tried on some random LEDs and they lit up whitewell acually the 3rd light is blue but not pretty bright
-
Ich habe gerade gemerkt, dass ich garnicht das tuturial verwendet habe sondern eines auf YT, auf dem Raspberry läuft auf jeden fall HyperBian
-
Wie kann ich das testen?
-
Liebe Community,
tut mir wirklich Leid falls ich eure Zeit verschwende, ich würde mich aber doch sehr über etwas Hilfe freuen
Naja nun denn: Ich habe das Tuturial hier im Forum befolgt und versucht meine ws2801 LEDs mit Hyperion ng über einen Raspberry Pi 3B zu steuern. Nun das Problem: ich habe jetzt alles richtig angeschlossen (außer das ich nur auf der Eingangsseite das 5V Netzteil angeschlossen habe), dann habe ich auf dem PI Hyperion installiert und auch mit meinen 2 Philipps Hue color Lampen zum Laufen gebracht. Am Raspberry stecken alle PINs richtig allerdings leuchten am LED stripe nur die 3. Led blau und einige andere weiß (in keinen muster). In Hyperion habe ich auch alles richtig eingestellt und den Rainbow Effekt versucht. Leider kein Ergebnis. Daraufhin habe ich probiert die LEDs mit einem anderen PI mit einem Python Programm zu steuern. Auch hier nichts. Ich denke allerdings nicht, dass die LEDs defekt sind, sonnst würden Sie ja nicht leuchten oder?
Habe viel gesucht aber nichts gefunden was geholfen hat.
Nachdem die ganze Sache ja doch nicht so günstig ist bitte ich nun um Hilfe.
Led stripe: BTF-LIGHTING WS2801 5050 SMD RGB...
Netzteil: Capolida 5V 10A 50W 100-240V LED...
Pi: Raspberry Pi 3 Model B...