heute WLED bestellt dann passt mein ambilight wieder
Beiträge von Martin Bergsmann
-
-
ja er hat immer kurze aussetzer von ein paar milisekunden. wenn ich den letzten strip dann abhänge läuft alles problemlos und flüssig. die steckverbindungen sind ja auch alles andere als. sobald minimal an spannung am strip ist gehen die auseinander
-
Er ist ca 30cm entfernt vom Router. Also ich denke nahe genug.
Hab ihn ausgesteckt, angesteckt, neu in die App integriert und dann nach dem Essen getestet.
-
ja es gibt in der app sogar probleme. hab jetzt 2x 3A Netzteile probiert. aber egal mit welchem netzteil ist der stripe teilweise nicht erreichbar in der app mit 300 LEDs. mit 240 kein problem. naja schade, aber gut dass es Alternativen gibt
-
ich probier mal ein paar netzteile durch, muss ich mir halt bestellen. wie mach ich es denn dann, dass immer die 1120 version startet, wenn ich zb den rasp neu starten muss? weil jetzt startet ja immer die normale version wieder. danke
-
also dann doch wieder WLED. ist mir zu teuer, dass ich da noch herum löten anfange... und dann funktioniert es eh wahrscheinlich nicht so zuverlässig.
-
oh ok danke. sind halt 2 so normale handy ladenetzteile. so wirds eigentlich auch auf der homepage beschrieben...
-
Ich steig hier mal mit ein:
@Martin Bergsmann
Sehe ich das richtig, dass du zwei USB-Netzteile, eins am Anfang und eins am Ende des LED-Stripe angeschlossen hast? Quasi zwei NT parallel?ja genau so ist es
-
Aber ich möchte mich für die wahnsinnig tolle Unterstützung bedanken. Echt tolle Arbeit danke danke danke. Aber meine Nerven wurden doch sehr angespannt
-
ja bevor ich da noch herum tu werd ich das ganze zurück schicken. WLED funktioniert so wunderbar... hab da schon mehrere stripes verbaut
-
ja aber wieso verkaufen die dann sowas, es gibt ja gar kein 10A netzteil mit usb anschluss oder
-
ja sind normale handynetzteile mit jeweils 2A
hab den fehler gefunden jetzt: mit 240 LEDs funktionierts wunderbar alles drüber ist anscheinend zu viel des guten
-
jetzt wieder mit dem neuen
2021-01-08T22:51:49.346Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'cololight'.
2021-01-08T22:51:49.346Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":309,"hardwareLedCount":309,"host":"192.168.0.185","latchTime":0,"type":"cololight"}]
2021-01-08T22:51:49.346Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2021-01-08T22:51:49.346Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2021-01-08T22:51:49.347Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.0.185 as an IP-address.
2021-01-08T22:51:49.347Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.0.185:8900
2021-01-08T22:51:49.347Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:67:init()) DeviceType : cololight
2021-01-08T22:51:49.347Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:68:init()) ColorOrder : rgb 2021-01-08T22:51:49.348Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:69:init()) LatchTime : 0
2021-01-08T22:51:49.351Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled 2021-01-08T22:51:50.350Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'cololight' signals error: 'Cololight device (192.168.0.185) not accessible to get additional properties!' -
2021-01-08T22:42:41.183Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'cololight' signals error: 'Hardware LED count must be multiple of 30 for Cololight Strip!'
-
gute 5 meter.... ja hab auch gelesen, dass das modul abstürzt teilweise. daher werd ich es wieder zurück senden und mir das WLED wieder holen, die hab ich schon verbaut und funktionieren wunderbar
-
Beides ne Zahl die etwas unrealistisch klingt. Kann mir kein USB Netzteil vorstellen was soviel Ampere hat.
ja da hast recht. hängt an einem netzteil vorne und einem am ende. trotzdem eigentlich weit entfernt von den ampere. aber wurde so auf der website vorgeschlagen
-
Sorry das war 2cmal
-
Code
2021-01-08T20:06:26.499Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP : 192.168.0.17 2021-01-08T20:06:26.499Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port : 19446 2021-01-08T20:06:26.499Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1] 2021-01-08T20:06:26.500Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn()) 2021-01-08T20:06:26.500Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.0.17/json/state] [{"on":true}] 2021-01-08T20:06:26.776Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2] 2021-01-08T20:06:26.776Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive 2021-01-08T20:06:26.777Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started 2021-01-08T20:06:26.956Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled 2021-01-08T20:06:26.957Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-01-08T20:06:26.958Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times 2021-01-08T20:06:26.958Z [hyperiond EFFECTENGINE] (INFO) Run effect "Cinema brighten lights" on channel 0 2021-01-08T20:06:26.958Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive 2021-01-08T20:06:26.958Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Cinema brighten lights], smoothCfg [2] 2021-01-08T20:06:26.958Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled 2021-01-08T20:06:26.958Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive 2021-01-08T20:06:26.959Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Cinema brighten lights' started 2021-01-08T20:06:26.959Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created 2021-01-08T20:06:27.087Z [hyperiond HYPERION] (INFO) Hyperion instance 'WLED TV' has been started 2021-01-08T20:06:26.960Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive 2021-01-08T20:06:26.961Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled 2021-01-08T20:06:26.961Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created 2021-01-08T20:06:27.089Z [hyperiond HYPERION] (INFO) Hyperion instance 'Cololight' has been started 2021-01-08T20:06:26.962Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'cololight'. 2021-01-08T20:06:26.962Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":310,"hardwareLedCount":310,"host":"192.168.0.185","latchTime":0,"type":"cololight"}] 2021-01-08T20:06:26.962Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms 2021-01-08T20:06:26.963Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms 2021-01-08T20:06:26.963Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.0.185 as an IP-address. 2021-01-08T20:06:26.963Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.0.185:8900 2021-01-08T20:06:26.963Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:69:init()) DeviceType : cololight 2021-01-08T20:06:26.963Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:70:init()) ColorOrder : rgb 2021-01-08T20:06:26.963Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceCololight.cpp:71:init()) LatchTime : 0 2021-01-08T20:06:27.049Z [hyperiond CEC] (INFO) Starting CEC handler 2021-01-08T20:06:27.071Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'philipshue'. 2021-01-08T20:06:27.072Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled 2021-01-08T20:06:27.072Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 1, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-01-08T20:06:27.073Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"blackLightsTimeout":15000,"brightnessFactor":1,"brightnessMax":1,"brightnessMin":0,"brightnessThreshold":0,"clientkey":"0758C029F86E43B1B1565E2CF557CE59","colorOrder":"rgb","currentLedCount":8,"debugLevel":"0","debugStreamer":false,"groupId":2,"hardwareLedCount":8,"latchTime":0,"lightIds":["3","4","7","8","9","11","12","24"],"output":"192.168.0.94","restoreOriginalState":true,"sslHSTimeoutMax":1000,"sslHSTimeoutMin":400,"sslReadTimeout":0,"switchOffOnBlack":false,"transitiontime":1,"type":"philipshue","useEntertainmentAPI":true,"username":"a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM","verbose":false}] 2021-01-08T20:06:27.075Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms 2021-01-08T20:06:27.074Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times 2021-01-08T20:06:27.079Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0 2021-01-08T20:06:27.080Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2] 2021-01-08T20:06:27.079Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400 2021-01-08T20:06:27.080Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive 2021-01-08T20:06:27.083Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started 2021-01-08T20:06:27.084Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive 2021-01-08T20:06:27.084Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled 2021-01-08T20:06:27.093Z [hyperiond V4L2:AUTO] (INFO) available V4L2 devices: /dev/video0 UVC Camera (534d:2109): USB Vid 2021-01-08T20:06:27.094Z [hyperiond V4L2:AUTO] (INFO) search for usable video devices 2021-01-08T20:06:27.095Z [hyperiond V4L2:AUTO] (INFO) test v4l device: /dev/video0 2021-01-08T20:06:27.096Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=1920 height=1080 2021-01-08T20:06:27.097Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 5 fps 2021-01-08T20:06:27.098Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV 2021-01-08T20:06:27.135Z [hyperiond V4L2:AUTO] (INFO) found usable v4l2 device: /dev/video0 (UVC Camera (534d:2109): USB Vid) 2021-01-08T20:06:27.139Z [hyperiond V4L2:AUTO] (INFO) Started 2021-01-08T20:06:27.139Z [hyperiond V4L2:auto] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start() 2021-01-08T20:06:27.085Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created 2021-01-08T20:06:27.140Z [hyperiond HYPERION] (INFO) Hyperion instance 'HUE TV' has been started 2021-01-08T20:06:27.079Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms 2021-01-08T20:06:27.087Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) DeviceType : philipshue 2021-01-08T20:06:27.080Z [hyperiond PROTOSERVER] (INFO) Started on port 19445 2021-01-08T20:06:27.088Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver 2021-01-08T20:06:27.089Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver 2021-01-08T20:06:27.089Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) LedCount : 8 2021-01-08T20:06:27.092Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) ColorOrder : rgb 2021-01-08T20:06:27.093Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) RefreshTime : 0 2021-01-08T20:06:27.097Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) LatchTime : 0 2021-01-08T20:06:27.117Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Hostname/IP : 192.168.0.94 2021-01-08T20:06:27.120Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/] 2021-01-08T20:06:27.125Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings 2021-01-08T20:06:27.125Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig 2021-01-08T20:06:27.125Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings 2021-01-08T20:06:27.126Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig 2021-01-08T20:06:27.127Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver' 2021-01-08T20:06:27.127Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate 2021-01-08T20:06:27.129Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key 2021-01-08T20:06:27.130Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver' 2021-01-08T20:06:27.197Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-01-08T20:06:27.198Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255] 2021-01-08T20:06:27.198Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-08T20:06:27.199Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn()) 2021-01-08T20:06:27.199Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.0.17/json/state] [{"on":true}] 2021-01-08T20:06:27.200Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-01-08T20:06:27.200Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255] 2021-01-08T20:06:27.201Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-08T20:06:27.347Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-01-08T20:06:27.348Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255] 2021-01-08T20:06:27.348Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-08T20:06:27.348Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1277:switchOn()) 2021-01-08T20:06:27.391Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.407Z [hyperiond CEC] (INFO) Auto detecting CEC adapter 2021-01-08T20:06:27.408Z [hyperiond CEC] (INFO) CEC Adapter: 2021-01-08T20:06:27.408Z [hyperiond CEC] (INFO) Name : RPI 2021-01-08T20:06:27.408Z [hyperiond CEC] (INFO) Path : Raspberry Pi 2021-01-08T20:06:27.495Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.496Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled 2021-01-08T20:06:27.496Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-01-08T20:06:27.511Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Bridge Name : Philips hue 2021-01-08T20:06:27.525Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Model : BSB002 2021-01-08T20:06:27.525Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Bridge-ID : 001788FFFEB199B8 2021-01-08T20:06:27.525Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) SoftwareVersion : 1942135050 2021-01-08T20:06:27.525Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) API-Version : 1.42.0 2021-01-08T20:06:27.525Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) EntertainmentReady : 1 2021-01-08T20:06:27.526Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Lights in Bridge found : 18 2021-01-08T20:06:27.527Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"blackLightsTimeout":15000,"brightnessFactor":1,"brightnessMax":1,"brightnessMin":0,"brightnessThreshold":0,"clientkey":"0758C029F86E43B1B1565E2CF557CE59","colorOrder":"rgb","currentLedCount":8,"debugLevel":"0","debugStreamer":false,"groupId":2,"hardwareLedCount":8,"latchTime":0,"lightIds":["3","4","7","8","9","11","12","24"],"output":"192.168.0.94","restoreOriginalState":true,"sslHSTimeoutMax":1000,"sslHSTimeoutMin":400,"sslReadTimeout":0,"switchOffOnBlack":false,"transitiontime":1,"type":"philipshue","useEntertainmentAPI":true,"username":"a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM","verbose":false}] 2021-01-08T20:06:27.527Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms 2021-01-08T20:06:27.527Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms 2021-01-08T20:06:27.527Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:96:init()) Successfully parsed 127.0.0.1 as an ip address. 2021-01-08T20:06:27.527Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:127:init()) UDP SSL using 127.0.0.1:2100 2021-01-08T20:06:27.528Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Off on Black : 0 2021-01-08T20:06:27.528Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Brightness Factor : 1.000000 2021-01-08T20:06:27.528Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Transition Time : 1 2021-01-08T20:06:27.528Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Restore Original State : 1 2021-01-08T20:06:27.528Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Use Hue Entertainment API : 1 2021-01-08T20:06:27.528Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Entertainment API Group-ID : 2 2021-01-08T20:06:27.528Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Signal Timeout on Black : 15000ms 2021-01-08T20:06:27.529Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Brightness Min : 0.000000 2021-01-08T20:06:27.529Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Brightness Max : 1.000000 2021-01-08T20:06:27.529Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Brightness Threshold : 0.000000 2021-01-08T20:06:27.529Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Entertainment Group found : [2] Ambilight 2021-01-08T20:06:27.529Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Lights in Group : 8 2021-01-08T20:06:27.529Z [hyperiond LEDDEVICE] (INFO) Entertainment Group [2] "Ambilight" with 8 Lights found 2021-01-08T20:06:27.530Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Light-IDs configured : 8 2021-01-08T20:06:27.530Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:392:log()) Light-IDs : 8, 11, 9, 4, 24, 12, 7, 3 2021-01-08T20:06:27.530Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:666:philipsHueLight()) Recognized model id LLC010 of light ID 3 as gamut A 2021-01-08T20:06:27.530Z [hyperiond LEDDEVICE] (INFO) Light ID 3 ("Hue iris 1", LED index "0") created 2021-01-08T20:06:27.530Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:682:philipsHueLight()) Recognized model id LCT015 of light ID 4 as gamut C 2021-01-08T20:06:27.530Z [hyperiond LEDDEVICE] (INFO) Light ID 4 ("Hue color lamp 1", LED index "1") created 2021-01-08T20:06:27.530Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:682:philipsHueLight()) Recognized model id LST002 of light ID 7 as gamut C 2021-01-08T20:06:27.530Z [hyperiond LEDDEVICE] (INFO) Light ID 7 ("Hue lightstrip plus 2", LED index "2") created 2021-01-08T20:06:27.530Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:666:philipsHueLight()) Recognized model id LLC011 of light ID 8 as gamut A 2021-01-08T20:06:27.531Z [hyperiond LEDDEVICE] (INFO) Light ID 8 ("Hue bloom 1", LED index "3") created 2021-01-08T20:06:27.531Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:666:philipsHueLight()) Recognized model id LLC011 of light ID 9 as gamut A 2021-01-08T20:06:27.531Z [hyperiond LEDDEVICE] (INFO) Light ID 9 ("Hue bloom 2", LED index "4") created 2021-01-08T20:06:27.531Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:682:philipsHueLight()) Recognized model id LCA001 of light ID 11 as gamut C 2021-01-08T20:06:27.531Z [hyperiond LEDDEVICE] (INFO) Light ID 11 ("Hue color lamp 3", LED index "5") created 2021-01-08T20:06:27.531Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:682:philipsHueLight()) Recognized model id LCA001 of light ID 12 as gamut C 2021-01-08T20:06:27.531Z [hyperiond LEDDEVICE] (INFO) Light ID 12 ("Hue color lamp 4", LED index "6") created 2021-01-08T20:06:27.532Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:682:philipsHueLight()) Recognized model id LST002 of light ID 24 as gamut C 2021-01-08T20:06:27.532Z [hyperiond LEDDEVICE] (INFO) Light ID 24 ("Hue lightstrip plus 3", LED index "7") created 2021-01-08T20:06:27.532Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"blackLightsTimeout":15000,"brightnessFactor":1,"brightnessMax":1,"brightnessMin":0,"brightnessThreshold":0,"clientkey":"0758C029F86E43B1B1565E2CF557CE59","colorOrder":"rgb","currentLedCount":8,"debugLevel":"0","debugStreamer":false,"groupId":2,"hardwareLedCount":8,"host":"192.168.0.94","hs_attempts":5,"hs_timeout_max":1000,"hs_timeout_min":400,"latchTime":0,"lightIds":["3","4","7","8","9","11","12","24"],"output":"192.168.0.94","psk":"0758C029F86E43B1B1565E2CF557CE59","psk_identity":"a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM","read_timeout":0,"restoreOriginalState":true,"retry_left":5,"rewriteTime":20,"seed_custom":"dtls_client","servername":"Hue","sslHSTimeoutMax":1000,"sslHSTimeoutMin":400,"sslReadTimeout":0,"sslport":2100,"switchOffOnBlack":false,"transitiontime":1,"type":"philipshue","useEntertainmentAPI":true,"username":"a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM","verbose":false}] 2021-01-08T20:06:27.532Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms 2021-01-08T20:06:27.532Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 20ms 2021-01-08T20:06:27.533Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 20ms 2021-01-08T20:06:27.533Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:96:init()) Successfully parsed 192.168.0.94 as an ip address. 2021-01-08T20:06:27.533Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdpSSL.cpp:127:init()) UDP SSL using 192.168.0.94:2100 2021-01-08T20:06:27.533Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1277:switchOn()) 2021-01-08T20:06:27.533Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/lights/3] 2021-01-08T20:06:27.571Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.572Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/lights/4] 2021-01-08T20:06:27.595Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.596Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/lights/7] 2021-01-08T20:06:27.609Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-08T20:06:27.610Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-08T20:06:27.638Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.639Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/lights/8] 2021-01-08T20:06:27.671Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.672Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/lights/9] 2021-01-08T20:06:27.694Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.696Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/lights/11] 2021-01-08T20:06:27.742Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.743Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/lights/12] 2021-01-08T20:06:27.776Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.777Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/lights/24] 2021-01-08T20:06:27.838Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.839Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:121:get()) GET: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/groups/2] 2021-01-08T20:06:27.882Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:27.883Z [hyperiond LEDDEVICE] (DEBUG) (LedDevicePhilipsHue.cpp:1095:startStream()) Start entertainment stream 2021-01-08T20:06:27.883Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.0.94/api/a2W8CY4FwYI4pHS0DQgo9WUD9rOUoQEbRlyVqRZM/groups/2] [{"stream":{"active":true}}] 2021-01-08T20:06:27.965Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'cololight' signals error: 'Cololight device (192.168.0.185) not accessible to get additional properties!' 2021-01-08T20:06:27.966Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-08T20:06:27.995Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:207:setInput()) Priority 0 is now active 2021-01-08T20:06:28.044Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200] 2021-01-08T20:06:28.151Z [hyperiond LEDDEVICE] (INFO) Philips Hue Entertaiment API successful connected! Start Streaming. 2021-01-08T20:06:28.151Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled 2021-01-08T20:06:28.152Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-01-08T20:06:28.167Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active 2021-01-08T20:06:28.174Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active 2021-01-08T20:06:30.157Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0 2021-01-08T20:06:30.157Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-01-08T20:06:30.157Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-01-08T20:06:30.157Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0] 2021-01-08T20:06:30.406Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-08T20:06:30.416Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0] 2021-01-08T20:06:31.156Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0 2021-01-08T20:06:31.156Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0 2021-01-08T20:06:31.157Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-01-08T20:06:31.157Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-01-08T20:06:31.157Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 1, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-01-08T20:06:31.157Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0] 2021-01-08T20:06:31.158Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0] 2021-01-08T20:06:31.406Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-08T20:06:31.407Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-08T20:06:31.440Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0] 2021-01-08T20:06:31.455Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0] 2021-01-08T20:06:32.754Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.0.122 2021-01-08T20:06:32.754Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.122' switch to Hyperion instance 0 2021-01-08T20:06:33.996Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.122' switch to Hyperion instance 1 2021-01-08T20:06:37.415Z [hyperiond CEC] (ERROR) Failed to open the CEC adaper on port RPI 2021-01-08T20:06:49.584Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled 2021-01-08T20:06:52.388Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.122
-
sodala habs mal umgestellt auf 309 aber passiert nix leider
-
ah das hab ich noch nicht gesehen das feld vorher
ich probier wenn meine kids schlafen