Beiträge von the1one

deze melding krijg ik bij het installeren van het 3de tekstje

E: Unable to locate package libcec4-dev

net terug getest en boot is ook een beetje flikker.
ga nu al de gegevens ingeven die jij hierboven staan hebt.

ok ik pas het aan thnx ,nee geen zwarte randen.

in het knipsel zie je hoe de instellingen zijn

heb het even gefilmd

[MEDIA=googledrive]1EzO_iJBx8tK68Q6O67MW0MEYk4_A1rs0[/MEDIA]

Straks direct doen. Wat ik ook gemerkt heb is dat de capture card regelmatig uitvalt op hyperion. Ik kan hem wel gewoon terug aanzetten

terug opnieuw begonnen andere pi en.... het werkto_O allen heb ik nu flikkering terug

na heel veel lezen denk ik dat mijn hyperion niet in root komt zou dit kunnen?

Zo is het

Ja 6 de van boven te tellen

ik wil ook gerust volledig opnieuw beginnen met de software en tut dat jij voorstelt?

ook dit moet je ff toelichten.... leddevice staat op PWM GPIO18 pin 12 als het goed is.

SORRY he:crying:

hoe zet ik de dispmanx uit?

Zitat von jeroen warmerdam

ik ga het straks allemaal even bekijken, even rustig doornemen

filmpje ken ik niet maar meer mensen volgen dit en zie je weleens terug hier als het niet lukt

ok thnx:)

2021-01-13T17:17:56.521Z [hyperiond DAEMON] (INFO) CEC handler created
2021-01-13T17:17:56.537Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2021-01-13T17:17:56.543Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2021-01-13T17:17:56.544Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /.hyperion/custom-effects
2021-01-13T17:17:56.571Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2021-01-13T17:17:56.573Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2021-01-13T17:17:56.573Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2021-01-13T17:17:56.611Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2021-01-13T17:17:56.612Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-01-13T17:17:56.613Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 4x1053343732
2021-01-13T17:17:56.613Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2021-01-13T17:17:56.614Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2021-01-13T17:17:56.614Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-01-13T17:17:56.616Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 640, height: 480 for capture
2021-01-13T17:17:56.616Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
2021-01-13T17:17:56.616Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled
2021-01-13T17:17:56.616Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled
2021-01-13T17:17:56.616Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2021-01-13T17:17:56.616Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
2021-01-13T17:17:56.622Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
2021-01-13T17:17:56.629Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2021-01-13T17:17:56.615Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'ws281x'.
2021-01-13T17:17:56.615Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2021-01-13T17:17:56.615Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":130,"dma":5,"gpio":18,"hardwareLedCount":130,"invert":false,"latchTime":0,"leds":256,"pwmchannel":0,"rewriteTime":1000,"rgbw":false,"type":"ws281x","whiteAlgorithm":"subtract_minimum"}]
2021-01-13T17:17:56.616Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-13T17:17:56.616Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2021-01-13T17:17:56.617Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 1000ms
2021-01-13T17:17:56.617Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 1000ms
2021-01-13T17:17:56.617Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWS281x.cpp:59:init()) ws281x strip type : 1050624
2021-01-13T17:17:56.617Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'ws281x' signals error: 'Failed to open. Error message: Hardware revision is not supported'
2021-01-13T17:17:56.622Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2021-01-13T17:17:56.622Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2021-01-13T17:17:56.630Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2021-01-13T17:17:56.636Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2021-01-13T17:17:56.637Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2021-01-13T17:17:56.638Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-01-13T17:17:56.638Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-01-13T17:17:56.682Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2021-01-13T17:17:56.682Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2021-01-13T17:17:56.682Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2021-01-13T17:17:56.683Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2021-01-13T17:17:56.683Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2021-01-13T17:17:56.685Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
2021-01-13T17:17:56.685Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Throws error nr: Cannot identify '/dev/video0' error code 2, No such file or directory
2021-01-13T17:17:56.684Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2021-01-13T17:17:56.686Z [hyperiond HYPERION] (INFO) Hyperion instance 'GPIO-18' has been started
2021-01-13T17:17:56.729Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-01-13T17:17:56.730Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-01-13T17:17:56.730Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-01-13T17:17:56.730Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-01-13T17:17:56.731Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2021-01-13T17:17:56.742Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
2021-01-13T17:17:56.743Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
2021-01-13T17:17:56.744Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2021-01-13T17:17:56.779Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2021-01-13T17:17:56.780Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-13T17:17:56.780Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2021-01-13T17:17:56.780Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2021-01-13T17:17:59.768Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2021-01-13T17:17:59.768Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-13T17:17:59.768Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2021-01-13T17:18:00.019Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255
2021-01-13T17:18:00.019Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[0]
2021-01-13T17:18:00.019Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off
2021-01-13T17:18:09.722Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.1.58
2021-01-13T17:18:09.723Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.1.58' switch to Hyperion instance 0
2021-01-13T17:23:10.080Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.58
2021-01-13T17:23:10.096Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.1.58
2021-01-13T17:23:55.891Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
2021-01-13T17:23:56.395Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.1.58
2021-01-13T17:23:56.395Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.1.58' switch to Hyperion instance 0
2021-01-13T17:24:14.906Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.58

alles is terug aangesloten. misschien nog een opmerking telkens als ik reboot het wit lampje op de leds blijft gewoon branden

2021-01-12T18:53:10.199Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'ws281x' signals error: 'Failed to open. Error message: Hardware revision is not supported' 2021-01-13T17:03:44.509Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.58 2021-01-13T17:03:44.509Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.58 2021-01-13T17:03:44.509Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.58

hier kan je zien wat ik bedoel moet led device

zodra ik mijn zoon afgezet heb op de voetbal installeer ik alles terug en bezorg ik je de debuglog en txt file.

ik gebruik inderdaad gpio 18
wat ik vooral raar vind nu is dat het bolletje bij led device grijs blijft of is dit normaal?