Beiträge von djfauliv

Zitat von jeroen warmerdam

you have to make the call on that, but it looks okay.

reminder; the device can be slower in performing because off the limitations of the RPI3 >> this has only support for USB 2.0 ports/speed while your Amazon 4K splitter is asking for 3.0 USB ports/speed.

while it can work the device can not run in optimal form ( as in 3.0 USB port) so you can expect trouble when playing 4K.
i don't know this for shure but because this is a loop" device the main HDMI signal is going out to the 65" 4K TV
the only thing i am wondering if the device is capable to loop the 4K signal without quality loss ( i think not) on 60Hz when its connected to a RPI3 USB port which grabs the image on a slower port....

just test and you will see.

Alles anzeigen

Hi jeroen I have received the new graber and it is perfect without stopping and the LEDs look spectacular, thank you very much for your help from the beginning. I wish there were more people like you in the world.

g

[QUOTE= "jeroen warmerdam, publicación: 33090, miembro: 8541"] porque su mensaje de hardware en el perfil dice RPI3 :RE:pirata:[/QUOTE]

Yes becouse i dont see RP4 :roflmao::roflmao::roflmao:

Zitat von jeroen warmerdam

you have to make the call on that, but it looks okay.

reminder; the device can be slower in performing because off the limitations of the RPI3 >> this has only support for USB 2.0 ports/speed while your Amazon 4K splitter is asking for 3.0 USB ports/speed.

while it can work the device can not run in optimal form ( as in 3.0 USB port) so you can expect trouble when playing 4K.
i don't know this for shure but because this is a loop" device the main HDMI signal is going out to the 65" 4K TV
the only thing i am wondering if the device is capable to loop the 4K signal without quality loss ( i think not) on 60Hz when its connected to a RPI3 USB port which grabs the image on a slower port....

just test and you will see.

Alles anzeigen

i have a RP4 then i have 3.0 USB

tomorrow i say you the score.

[QUOTE = "jeroen warmerdam, publicación: 32998, miembro: 8541"] ¿nada ayuda? ¿Sigue siendo consecuencia del capturador USB? [/ QUOTE]

Jeroen i buy a new grabber to see if it works better and the problem is resolved. Do you think this will be better for a 65 '' 4K TV?

[QUOTE = "jeroen warmerdam, publicación: 32998, miembro: 8541"] ¿nada ayuda? ¿Sigue siendo consecuencia del capturador USB? [/ QUOTE]

No sé, no sé dónde atacar el problema, la verdad. Porque a primera vista parece que es poder pero me dices que no y sabrás mucho más que yo, así que no sé dónde está el problema.

el capturador funciona porque muestra la imagen. mira el dibujo.

Zitat von jeroen warmerdam

okay put 0 there

and PAL setting for video standard

save and then reboot the PI

you can play" with resolution settings if image apear to be slow then make your resolution smaller but make sure its in 16/9 layout

Alles anzeigen

i do it the changes in the picture, but nothing do the same jeroen...

Zitat von jeroen warmerdam

can u input 0 there? what is the possibility to fill in with arrows?

AUTO, camera1,custom but custom are a number...

i can put 0 there

[QUOTE = "jeroen warmerdam, publicación: 32982, miembro: 8541"] grabber obtiene su energía del puerto USB raspi, raspi obtiene su energía de la fuente de alimentación
poner líneas adicionales, poner todas las líneas allí

arm_freq = 900 cambie la línea que ya tiene y la opción out # luego coloque las líneas allí debajo, también la línea USB >> arm ahora es 700, que es lento
force_turbo = 1

luego, configure el dispositivo de entrada no automático sino a / dev / video0
establecer fotogramas por segundo a 15 fotogramas
resolución 1280x720

luego guarde y avíseme qué sucede porque Hyperion detecta su capturador USB, así que está bien [/ QUOTE]

I have made all the changes but in the input it does not let me put / dev / video0 only a number look the picture.

Zitat von jeroen warmerdam

i would increase your USB port power,

go to config.txt ( you can do that direct via terminal or indirect on SD card) and put in a line, then save

max_usb_current=1

important (NO #) before the line!

Alles anzeigen

I have and continues to do the same jeroen.
I have connected the power cable to the grabber to the raspberry. Is this correct? or I have to connect it to a mobile charger for example

2021-01-25T15:23:29.585Z [hyperiond DB] (ERROR) Previous line repeats 2 times 2021-01-25T15:23:29.586Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-25T15:23:29.586Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-25T15:23:29.586Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-25T15:23:29.586Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-25T15:23:30.672Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-25T15:23:30.674Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-25T15:23:30.674Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-25T15:23:30.674Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-25T15:23:30.689Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-01-25T15:23:30.689Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-01-25T15:23:30.690Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[255] 2021-01-25T15:23:30.690Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-01-25T15:23:32.515Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now inactive 2021-01-25T15:23:32.515Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 255 2021-01-25T15:23:32.515Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[255], previousPriority[240] 2021-01-25T15:23:32.516Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:562:handlePriorityChangedLedDevice()) No source left -> switch LED-Device off 2021-01-25T15:23:34.537Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled 2021-01-25T15:23:36.891Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.172

The LEDs light up according to the color of the screen. But I don't know why in source the grabber turns off and on and this causes the LEDs to turn off.

Im crazy with this. Please help

Hello I was assembling everything to finish the ambilight and when I connect the capturer with the yellow cable to the AV to HDMI converter and also this I connect it to the Switch in the Output and then in the input I connect any source is not seen.I leave you the Hyperion configuration just in case it's wrong.In addition to the Hardware that I have obtained and if something needs to be changed, I would appreciate if you would tell me.

I solve it. I didn't have the Layout set. Now I want to configure it for the ambilight of the tv 65 '' what i need more hardware?

Zitat von jeroen warmerdam

if all of this dont work then we do something diffrent

in terminal of raspi;

sudo systemctl disable --now hyperiond@pi
sudo systemctl enable --now hyperiond@root
sudo reboot now

copy and paste this code line with ctrl/shift +V in terminal then press enter

until last line of reboot

after reboot

sudo apt-get update

sudo apt-get upgrade

sudo apt-get install git cmake build-essential qtbase5-dev libqt5serialport5-dev libqt5sql5-sqlite libqt5svg5-dev libqt5x11extras5-dev libusb-1.0-0-dev python3-dev libcec-dev libxcb-image0-dev libxcb-util0-dev libxcb-shm0-dev libxcb-render0-dev libxcb-randr0-dev libxrandr-dev libxrender-dev libavahi-core-dev libavahi-compat-libdnssd-dev libjpeg-dev libturbojpeg0-dev libssl-dev zlib1g-dev

sudo apt-get install libraspberrypi-dev

Alles anzeigen

I have changed the address strip and it has started to light up in all colors flashing blue red and more.and I have changed the effect but only the 1st led goes and sometimes one of them blinksWhy is this happening?

It is coneccted in CI(in) no in CO(out) in can try in the other part in you want.

Zitat von jeroen warmerdam

turn both of them off, option out and save >. first we must see why GPIO is not firing the leds>> did you check dataflow arrow on the strip? it has to go away from the pins

I don't know what I have to do to do this.
(did you check dataflow arrow on the strip? it has to go away from the pins)

Zitat von jeroen warmerdam

ah you are spanish, that explains alot.

no problem.

look at section Effects, booteffect and backgroundeffect are this ones enabled? you can test effects with this setting. disable booteffect and enable backgroundeffect
Go to capturing hardware and option out USB grabber and displayplatform grabber
go to remote and see if leddevice is enabled, then disable and enable again
and deactivate and activate Hyperion at dashboard, last bowl has to be green (activated)

why only 72 leds with a 5 mtr strand? just curious

Alles anzeigen

I do this chages in layout i put 160 leds 32 leds * 5 metres and i put the two options usb grabber and displayplatform

Why when i desactivate hyperion my ledtrip dont off?

Zitat von jeroen warmerdam

yeah yeah, i think that you first clean up your connections en then another forummember has a go.
i don't know what you connected and how, you are only giving information whats not correlating the issue.

facts; did you make a led layout in led layout configurator ? if you didn't then lights don't do anything

Okey sorry. But im spanish and im trying tranlate jeje its difficult for me.

Yes, I made a design but I only put 72 LEDs as seen in capture # 2. Does this have something to do with not putting all the LEDs?

You tell me that I have to show you and I'll show you with a photo. sorry and thank you very much for helping me

Zitat von jeroen warmerdam

10 watts? okay guy>> for a 190 leds you need at least 9.5 Amps or in Watts 50 Watts

if you are talking about 10 Amps out of your PSU then its barely enough for your 5mtr strand

yeah yeah 5v 10 A 50 W