I have no clue what I did. But it´s working now 
Thank you for all your help. I´m comming back with more questions
Beiträge von Simon Clausen
-
-
oh okay, sorry.
What kind a code, sorry, brand new here -
Here you go
-
Yes. that´s the one
okay, now I get a connection error:
SSH Traffic:
Code
Alles anzeigenssh connected ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 & ssh out: cd /tmp && curl -# -k -L --output install_hyperion.sh --get https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh ssh out: ######################################################################## 100.0% ssh in: ******************************************************************************* ssh in: This script will install/update Hyperion Ambilight ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source. ssh in: ******************************************************************************* ssh in: ---> Stop Hyperion, if necessary ssh in: ---> Backup Hyperion configuration(s), if present ssh in: '/storage/.config/hyperion.config.json' -> '/tmp/hyperion.config.json' ssh in: ---> Downloading the appropriate Hyperion release ssh in: ---> Downloading Hyperion OpenELEC/LibreELEC release ssh out: 0.1% ssh out: ## 3.0% ssh out: ####### 10.9% ssh out: ############## 20.2% ssh out: #################### 28.4% ssh out: ######################## 34.7% ssh out: ######################### 35.3% ssh out: ################################ 44.8% ssh out: ###################################### 54.0% ssh out: ################################################################ 89.9% ssh out: ######################################################################## 100.0% ssh in: ---> Downloading Hyperion OpenELEC/LibreELEC dependencies ssh out: 0.2% ssh out: 1.2% ssh out: ## 3.4% ssh out: ### 4.7% ssh out: #### 6.1% ssh out: ##### 7.5% ssh out: ###### 8.9% ssh out: ####### 10.4% ssh out: ######## 11.6% ssh out: ######### 13.3% ssh out: ########## 15.0% ssh out: ########### 16.6% ssh out: ############# 18.1% ssh out: ############# 19.3% ssh out: ############## 20.7% ssh out: ################ 22.8% ssh out: ################# 24.6% ssh out: ################## 25.6% ssh out: ################### 27.5% ssh out: #################### 29.1% ssh out: ###################### 30.9% ssh out: ####################### 32.6% ssh out: ######################## 33.9% ssh out: ######################### 35.3% ssh out: ########################## 36.9% ssh out: ########################### 38.6% ssh out: ############################# 40.6% ssh out: ############################## 42.2% ssh out: ############################### 44.2% ssh out: ################################ 45.8% ssh out: ################################## 47.6% ssh out: ################################### 49.4% ssh out: #################################### 50.9% ssh out: ###################################### 52.9% ssh out: ####################################### 54.5% ssh out: ######################################## 56.3% ssh out: ######################################### 58.1% ssh out: ########################################### 59.9% ssh out: ############################################ 61.8% ssh out: ############################################# 63.8% ssh out: ############################################### 65.8% ssh out: ################################################ 67.4% ssh out: ################################################# 69.0% ssh out: ################################################## 70.7% ssh out: #################################################### 72.5% ssh out: ##################################################### 74.0% ssh out: ###################################################### 75.4% ssh out: ####################################################### 77.5% ssh out: ######################################################## 78.5% ssh out: ########################################################## 81.2% ssh out: ########################################################### 82.8% ssh out: ############################################################ 83.9% ssh out: ############################################################# 85.8% ssh out: ############################################################## 87.3% ssh out: ################################################################ 89.0% ssh out: ################################################################# 90.6% ssh out: ################################################################## 92.2% ssh out: ################################################################### 93.5% ssh out: #################################################################### 95.3% ssh out: ##################################################################### 97.0% ssh out: ####################################################################### 98.9% ssh out: ######################################################################## 100.0% ssh in: ---> Restore Hyperion configuration(s), if present ssh in: '/tmp/hyperion.config.json' -> '/storage/.config/hyperion.config.json' ssh in: ---> Starting Hyperion ssh in: ******************************************************************************* ssh in: Hyperion Installation/Update finished! ssh in: Please download the latest HyperCon version to benefit from new features! ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)! ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org ssh in: ******************************************************************************* ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 & ssh out: killall hyperiond 2>/dev/null ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 & ssh out: /storage/hyperion/bin/hyperion-remote.sh -c ffffff ssh in: hyperion-remote: ssh in: version : V1.02.0 (brindosch-f4162eb/2d45d51-1462453507 ssh in: build time: May 5 2016 06:07:27 ssh out: Unable to connect to host sftp Send Hyperion Config - Sourcepath: /Users/Stupidname/Desktop/Raspberry PI, Targetpath: /storage/.config/, Filename: hyperion.config.json ssh out: cat /storage/logfiles/hyperion.log ssh in: Hyperion Ambilight Deamon ssh in: Version : V1.02.0 (brindosch-f4162eb/2d45d51-1462453507 ssh in: Build Time: May 5 2016 06:07:47 ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json ssh in: terminate called after throwing an instance of 'std::runtime_error' ssh in: what(): Failed to parse configuration: * Line 13, Column 18 ssh in: Syntax error: value, object or array expected. ssh in: Aborted -
Hi, thank you for getting back to me.
What do you mean, wrong device? The lightpack comes with (lpd8806) strips.
The system is working fine, it´s just via rasplex using Hypercon it doesn´t work. -
Hi.
Okay, im firmly new to Rpi. I tried everything, and looked everywhere.I can´t get my Lightpack to work with rasplex. Prismatic on mac working fine.
I tested with Hypercon build and profile from previous owner, nothing.
.json file:
Code
Alles anzeigen// Automatically generated configuration file for 'Hyperion daemon' // Generated by: HyperCon (The Hyperion deamon configuration file builder { /// Device configuration contains the following fields: /// * 'name' : The user friendly name of the device (only used for display purposes) /// * 'type' : The type of the device or leds (known types for now are /// APA102, Adalight, AmbiLed, Atmo, Hyperion-USBASP-WS2801, Hyperion-USBASP-WS2812, Lightberry, Lightpack, LPD6803, LPD8806, Multi-Lightpack, P9813, Paintpack, PhilipsHUE, PiBlaster, SEDU, Test, ThinkerForge, TPM2, WS2801, WS2812b, None) /// * [device type specific configuration] /// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.). "device" : { "name" : “RasPlex”, "type" : "lpd8806", "output" : "/dev/spidev0.0", "rate" : 1000000, "colorOrder" : "grb" }, /// Color manipulation configuration used to tune the output colors to specific surroundings. /// The configuration contains a list of color-transforms. Each transform contains the /// following fields: /// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies /// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following /// tuning parameters: /// - 'saturationGain' The gain adjustement of the saturation /// - 'valueGain' The gain adjustement of the value /// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the /// following tuning parameters for each channel: /// - 'threshold' The minimum required input value for the channel to be on /// (else zero) /// - 'gamma' The gamma-curve correction factor /// - 'blacklevel' The lowest possible value (when the channel is black) /// - 'whitelevel' The highest possible value (when the channel is white) /// /// Next to the list with color transforms there is also a smoothing option. /// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning /// parameters: /// - 'type' The type of smoothing algorithm ('linear' or 'none') /// - 'time_ms' The time constant for smoothing algorithm in milliseconds /// - 'updateFrequency' The update frequency of the leds in Hz /// - 'updateDelay' The delay of the output to leds (in periods of smoothing) "color" : { "transform" : [ { "id" : "default", "leds" : "*", "hsv" : { "saturationGain" : 1.0000, "valueGain" : 1.0000 }, "red" : { "threshold" : 0.0000, "gamma" : 1.0000, "blacklevel" : 0.0000, "whitelevel" : 1.0000 }, "green" : { "threshold" : 0.0000, "gamma" : 1.0000, "blacklevel" : 0.0000, "whitelevel" : 1.0000 }, "blue" : { "threshold" : 0.0000, "gamma" : 1.0000, "blacklevel" : 0.0000, "whitelevel" : 1.0000 } } ], "smoothing" : { "type" : "linear", "time_ms" : 200, "updateFrequency" : 20.0000, "updateDelay" : 0 } }, /// The black border configuration, contains the following items: /// * enable : true if the detector should be activated /// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0) "blackborderdetector" : { "enable" : true, "threshold" : 0.01 }, /// The configuration of the effect engine, contains the following items: /// * paths : An array with absolute location(s) of directories with effects /// * bootsequence : The effect selected as 'boot sequence' "effects" : { "paths" : [ "/opt/hyperion/effects" ] }, // "bootsequence" : // { // "effect" : "Rainbow swirl fast", // "duration_ms" : 3000 // }, /// The configuration for the frame-grabber, contains the following items: /// * width : The width of the grabbed frames [pixels] /// * height : The height of the grabbed frames [pixels] /// * frequency_Hz : The frequency of the frame grab [Hz] // "framegrabber" : // { // "width" : 64, // "height" : 64, // "frequency_Hz" : 10.0 // }, /// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields: /// * xbmcAddress : The IP address of the XBMC-host /// * xbmcTcpPort : The TCP-port of the XBMC-server /// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback /// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show /// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback /// * grabMenu : Flag indicating that the frame-grabber is on(true) in the XBMC menu /// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver /// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing // "xbmcVideoChecker" : // { // "xbmcAddress" : "127.0.0.1", // "xbmcTcpPort" : 9090, // "grabVideo" : true, // "grabPictures" : true, // "grabAudio" : true, // "grabMenu" : false, // "grabScreensaver" : true, // "enable3DDetection" : true // }, /// The configuration of the Json server which enables the json remote interface /// * port : Port at which the json server is started "jsonServer" : { "port" : 19444 }, /// The configuration of the Proto server which enables the protobuffer remote interface /// * port : Port at which the protobuffer server is started // "protoServer" : // { // "port" : 19445 // }, /// The configuration of the boblight server which enables the boblight remote interface /// * port : Port at which the boblight server is started // "boblightServer" : // { // "port" : 19333 // }, /// Configuration for the embedded V4L2 grabber /// * device : V4L2 Device to use [default="/dev/video0"] /// * input : V4L2 input to use [default=0] /// * standard : Video standard (no-change/PAL/NTSC) [default="no-change"] /// * width : V4L2 width to set [default=-1] /// * height : V4L2 height to set [default=-1] /// * frameDecimation : Frame decimation factor [default=2] /// * sizeDecimation : Size decimation factor [default=8] /// * priority : Hyperion priority channel [default=800] /// * mode : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"] /// * cropLeft : Cropping from the left [default=0] /// * cropRight : Cropping from the right [default=0] /// * cropTop : Cropping from the top [default=0] /// * cropBottom : Cropping from the bottom [default=0] /// * redSignalThreshold : Signal threshold for the red channel between 0.0 and 1.0 [default=0.0] /// * greenSignalThreshold : Signal threshold for the green channel between 0.0 and 1.0 [default=0.0] /// * blueSignalThreshold : Signal threshold for the blue channel between 0.0 and 1.0 [default=0.0] // "grabber-v4l2" : // { // "device" : "/dev/video0", // "input" : 0, // "standard" : "no-change", // "width" : -1, // "height" : -1, // "frameDecimation" : 2, // "sizeDecimation" : 8, // "priority" : 800, // "mode" : "2D", // "cropLeft" : 0, // "cropRight" : 0, // "cropTop" : 0, // "cropBottom" : 0, // "redSignalThreshold" : 0.0, // "greenSignalThreshold" : 0.0, // "blueSignalThreshold" : 0.0 // }, /// The configuration for each individual led. This contains the specification of the area /// averaged of an input image for each led to determine its color. Each item in the list /// contains the following fields: /// * index: The index of the led. This determines its location in the string of leds; zero /// being the first led. /// * hscan: The fractional part of the image along the horizontal used for the averaging /// (minimum and maximum inclusive) /// * vscan: The fractional part of the image along the vertical used for the averaging /// (minimum and maximum inclusive) "leds" : [ { "index" : 0, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 1, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0900 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.2500 } }, { "index" : 2, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0900 }, "vscan" : { "minimum" : 0.2500, "maximum" : 0.5000 } }, { "index" : 3, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0900 }, "vscan" : { "minimum" : 0.5000, "maximum" : 0.7500 } }, { "index" : 4, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0900 }, "vscan" : { "minimum" : 0.7500, "maximum" : 1.0000 } }, { "index" : 5, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 } }, { "index" : 6, "hscan" : { "minimum" : 0.0500, "maximum" : 0.1000 }, "vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 } }, { "index" : 7, "hscan" : { "minimum" : 0.9000, "maximum" : 0.9500 }, "vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 } }, { "index" : 8, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 } }, { "index" : 9, "hscan" : { "minimum" : 0.9100, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.7500, "maximum" : 1.0000 } }, { "index" : 10, "hscan" : { "minimum" : 0.9100, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.5000, "maximum" : 0.7500 } }, { "index" : 11, "hscan" : { "minimum" : 0.9100, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.2500, "maximum" : 0.5000 } }, { "index" : 12, "hscan" : { "minimum" : 0.9100, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.2500 } }, { "index" : 13, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 14, "hscan" : { "minimum" : 0.9000, "maximum" : 0.9500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 15, "hscan" : { "minimum" : 0.8500, "maximum" : 0.9000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 16, "hscan" : { "minimum" : 0.8000, "maximum" : 0.8500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 17, "hscan" : { "minimum" : 0.7500, "maximum" : 0.8000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 18, "hscan" : { "minimum" : 0.7000, "maximum" : 0.7500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 19, "hscan" : { "minimum" : 0.6500, "maximum" : 0.7000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 20, "hscan" : { "minimum" : 0.6000, "maximum" : 0.6500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 21, "hscan" : { "minimum" : 0.5500, "maximum" : 0.6000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 22, "hscan" : { "minimum" : 0.5000, "maximum" : 0.5500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 23, "hscan" : { "minimum" : 0.4500, "maximum" : 0.5000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 24, "hscan" : { "minimum" : 0.4000, "maximum" : 0.4500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 25, "hscan" : { "minimum" : 0.3500, "maximum" : 0.4000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 26, "hscan" : { "minimum" : 0.3000, "maximum" : 0.3500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 27, "hscan" : { "minimum" : 0.2500, "maximum" : 0.3000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 28, "hscan" : { "minimum" : 0.2000, "maximum" : 0.2500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 29, "hscan" : { "minimum" : 0.1500, "maximum" : 0.2000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 30, "hscan" : { "minimum" : 0.1000, "maximum" : 0.1500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 31, "hscan" : { "minimum" : 0.0500, "maximum" : 0.1000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } } ], "endOfJson" : "endOfJson" }