Beiträge von mitsch73
-
-
Hallo,
seit gestern kommt von meinen USB-Grabber kein Signal mehr an.
Meine System
Raspberry Pi3
LED WS2801
USB-Grabber LogiLink Audio und Video Grabber USB 2.0
HDMI auf AV Konverter, GANA HDMI zu AV RCA CVBS Composite Video Audio Konverter Adapter Wandler 1080P für TV/PS3/VHS/VCR/DVD(Weiß)
Signal kommt aus Onkyo-Verstärker.
Es ging bereits, nur nun kann ich keinen Signal mehr abgreifen. Der USB-Eingang wird mir angezeigt, sehe aber kein Bild.
Hat bisher reibungslos funktioniert.
Und ja, hab schon die Version Alpha.9 probiert, selbes verhalten.
-
So, nun zum hoffentlich letzten Mal.
Ich krieg keine Verbindung mehr zu meinen Raspberry mehr hin.
Hat bis gestern funktioniert, nun kann er sich nicht mir ins WLAN einloggen bei mir.
Es kommt beim Start die Fehlermeldung "a start job is running for dhcpcd on all interfaces".
ifconfig -a gibt mir keine Adresse mehr aus.
In der wpa_supplicant.conf steht folgendes drin:
Natürlich mit meinen Passwort und meinen WLAN
-
Endlich meinen Fehler gefunden. Die Testumgebung hatte die falsche Laufrichtung.
Werde es nun mal auf die LEDs an den Fernseher übertragen. Hoffe, es funtz dann dort auch so gut.
-
Hab ich probiert, hat sich nix geändert.
Im Log heute steht:
2021-03-25T16:38:02.652Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.0.11
2021-03-25T16:38:02.653Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.11' switch to Hyperion instance 0
2021-03-25T16:38:29.230Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:76:setSourceAutoSelectEnabled()) Source auto select is now disabled
2021-03-25T16:38:29.230Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 254
2021-03-25T16:38:29.231Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-03-25T16:38:29.231Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[254], previousPriority[240]
2021-03-25T16:39:38.781Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.11
-
Das ist mein Fernbedienungsfeld.
Das sind Einträge, wenn ich darin was geändert habe:
2021-03-24T19:17:40.803Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[250], previousPriority[254]
2021-03-24T19:17:41.548Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2021-03-24T19:17:41.549Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[250]
2021-03-24T19:17:42.049Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 254
2021-03-24T19:17:42.049Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-03-24T19:17:42.049Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[254], previousPriority[240]
2021-03-24T19:17:43.959Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:270:clearInput()) Removed source priority 250
2021-03-24T19:17:43.959Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: disabled
2021-03-24T19:17:43.960Z [hyperiond Dispmanx] (DEBUG) (GrabberWrapper.cpp:58:stop()) Grabber stop()
2021-03-24T19:18:21.147Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.11
2021-03-24T19:18:21.195Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.11
2021-03-24T19:21:13.658Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.11
-
-
Das steht zum Beispiel im Protokoll wenn ich die LEDs mit dem Effekt Rainbow Swirl versehen will.
_____________________
2021-03-24T18:17:26.088Z [hyperiond EFFECTENGINE] (INFO) Run effect "My Modded Effect" on channel 1
2021-03-24T18:17:44.444Z [hyperiond EFFECTENGINE] (INFO) effect finished
2021-03-24T18:18:33.093Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.11
2021-03-24T18:18:33.105Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.11
2021-03-24T18:18:59.589Z [hyperiond EFFECTFILES] (INFO) Reload effect list
2021-03-24T18:18:59.612Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2021-03-24T18:18:59.623Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2021-03-24T18:18:59.625Z [hyperiond EFFECTFILES] (INFO) 1 effects loaded from directory /.hyperion/custom-effects
2021-03-24T18:19:01.801Z [hyperiond EFFECTENGINE] (INFO) Run effect "My Modded Effect" on channel 1
2021-03-24T18:19:01.804Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [My Modded Effect], smoothCfg [0]
2021-03-24T18:19:01.804Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'Web Configuration@::ffff:192.168.0.11/EFFECT' with priority 1 as inactive
2021-03-24T18:19:01.970Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 1 is now active
2021-03-24T18:19:01.970Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 1
2021-03-24T18:19:01.970Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[1], previousPriority[250]
2021-03-24T18:19:04.267Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.11
2021-03-24T18:19:04.281Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.11
2021-03-24T18:20:31.074Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:76:setSourceAutoSelectEnabled()) Source auto select is now disabled
2021-03-24T18:20:31.075Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 254
2021-03-24T18:20:31.075Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-03-24T18:20:31.075Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[254], previousPriority[1]
2021-03-24T18:20:47.125Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.11
________________________
In der Visualisierung sehe ich den Rainbow Swirl und meine 10 LEDs werden auch angezeigt.
Nur bei dem Strip mit dem 10 LEDs kommt nichts an.
-
Habs es auf WS 2801 geändert, aber kein Effekt.
-
Ich habe BTF-LIGHTING WS2801 5050 SMD RGB 32Leds/m 128leds Adressierbare Individuell DATA und CLOCK separat NichtWasserdicht Schwarz PCB Pixel Streifen DC5V
-
So. hab nun umgestellt auf die neuste Hyperion-Konfiguration.
Hat alles geklappt, hab für einen Test mal 10 LEDs angeschlossen.
Leider kann ich die nicht mit ansteuern. Ich finde meinen Fehler nicht.
Anschluss am Raspberry. Pin 9 = Ground, Pin 19 = DI, Pin 23 = CK.
Ich sehe in der Vorschau auch das Bild vom Raspberry-Bildschirm, also passt die Verbindung.
Aber ich kann die LEDs nicht steuern. Die 10 LEDS sind alle an und blau.
-
ok, werd ich probieren. Danke für den Tipp
-
Hallo zusammen,
bin neu hier.
Auf das Forum bin ich bei meiner Problemsuche aufmerksam geworden.
Will mit meinen Rasperry 3+ ein Ambilight an meinen Fernseher installieren.
Bin nach dieser Anleitung gegangen.
https://tutorials-raspberrypi.…lle-geraete-selber-bauen/
Hat alles super funktioniert.
Jetzt hab ich das Hyperion installiert. Die Anzahl meiner LEDs eingegeben und sonst alle Einstellungen vorgenommen.
Nur leider lassen sich die LEDs nicht ansteuern. Ich weiß nicht, was ich falsch gemacht habe.
Hardware:
Rasperry Pi3+
Video Grabber LogiLink VG0001A
PChero 30W Universal AC/DC Adapter Schaltnetzteil
HDMI auf AV Konverter
BTF-LIGHTING WS2801 5050 SMD RGB 32Leds/m 128leds
Ich kann meinen Rasperry sowohl mit Putty als auch mit Hyperion ansteuern.
Wenn ich aber über Hyperion an die LEDs eine bestimmt Farbe senden will, kommt im Protokoll diese Fehlermeldung:
ssh out: hyperion-remote -c ffffff
ssh in: hyperion-remote:
ssh in: version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
ssh in: build time: Aug 25 2019 10:39:08
ssh out: Unable to connect to host
Zudem kann ich das Bild des Grabbers nicht laden.
Fehlermeldung:
Kein Bild gefunden. Stoppe immer zuerst Hyperion und überprüfe das SSH Protokoll.
Dort steht:
ssh in: hyperion-v4l2:
ssh in: version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
ssh in: build time: Aug 25 2019 10:39:29
ssh out: VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
sftp getFile(./screenshot.png, java.awt.Image)
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null ; hyperion-v4l2 --device /dev/video0 --video-standard PAL --input 0 --width -1 --height -1 --crop-left 0 --crop-right 0 --crop-top 0 --crop-bottom 0 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --screenshot
ssh in: hyperion-v4l2:
ssh in: version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
ssh in: build time: Aug 25 2019 10:39:29
ssh out: VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
sftp getFile(./screenshot.png, java.awt.Image)
Wäre super, wenn mir wer helfen kann, ich bin mit meinen Latein am Ende.