Beiträge von kulle98

Zitat von TPmodding

If you select a static color, do they flicker too? how long are the cables from the pi to the leds? which cable did you use? did you look in the live preview in webUI if there is a flickern too?

yes, it is the same problem with a static color. The flickering doesn't appear on the UI. I'm using a standard LED Wire (), should be fine.

Zitat von Lighting-guy77

you have a grounding problem

i think your problem is GND ( ground) related,

try to GND to your Raspi and leds and connect the Raspi to the same PSU and leave the powerbrick out of the story.

you have a lot of juice ( more then enough ) so you can power Raspi/leds/USB capture device from same PSU

or; connect a groundwire between the V- of PSU to your GND of your powerbrick

Alles anzeigen

Thanks, I will adapt my setup. I don't know why i didn't think of powering everything with the PSU.

Hopefully this will fix everything.

Hello everybody,

I installed Hyperion last weekend and since yesterday I've had some issues.

All the LED's are flickering every 10 to 30 seconds, colors are accurate.

I'm an absolute Amateur, looking through the forum, I figured it may be a grounding issue. But I have no clue how to fix it.

Here's my Setup:

• Raspberry Pi Zero W with HyperBian
• HAILI 150W - 30A/5V Power Supply ()
• LogiLink USB-Grabber ()
• Musou HDMI to 3RCA Converter ()
• FeinTech HDMI Splitter with Down Scaler ()
• RavPower 6-Port USB Power Supply ()
• APA102 LED Strip, 60 LEDs/m - currently 160 LEDs in Use (AliExpress)

Attached you can find the wiring and my config file.

Hopefully its an easy fix.