Cheers! Disabling smoothing solved the problem.
Beiträge von astranberg
-
-
Sure.
2021-05-21T19:11:12.714Z [hyperiond V4L2:AUTO] (INFO) configured v4l device: - Pastebin.com
FYI, something I just noticed is that the LED Visualization is working correctly. It's showing the LEDs as the appropriate colors they should be. The LEDs are just not updating unless I toggle the LEDs on/off or USB capture on/off.
-
-
Hey all!
I recently upgraded from old hyperion to hyperion.ng and am running into some issues.
Issue:
1. Solid color changes via the server does not update the light UNTIL either the LEDs are turned off and back on, or if blackbar detection is toggled on/off.
2. USB changes the light to various colors of beige/yellow and doesn't change with the input.
I'm thinking the issues are related.
Hardware:
I'm using a RPi 2 to control everything. The input is via USB (from an HDMI splitter and HDMI to VGA downstream).
Lights are WS2801 output on the same RPi2 as is the server.
Details / Rebuttals:
The USB capture is working - I can see a livestream of the video via the server.
The gamma correction is set to 1.
Config is attached.
Thanks!