Beiträge von Imperius_Sha

Imperius_Sha · 23. Mai 2021

Zitat von Lighting-guy77

try other SPI ledcontroller settings

I tried sk6822spi and ws2812spi again and this time both won't turn on the LED either. Changing Baudrate to 7000000 didn't really change much, just the fact that the first LED is blinking in different colors, the second LED is white and the third LED is green, all others are still not lighting up.

Edit: After switching back and forth between some settings/controller types, the first 10 LED turned on in a white color even though there was no white color on the screen.

I also checked if the LED Strip is getting 5V everywhere and it does, so it shouldnt be a power Problem.

Zitat von Lighting-guy77

check ledlayout in Json file if al the leds are really there in the file

I checked the .json and all LED seem to be there, here is the config in case I missed something:

Hyperion-2.0.0-alpha.9-Backup (My Hyperion Config) 2021.05.23.txt

Zitat von Lighting-guy77

so what i would do then is power the ledstrip from both sides, beginning and end , and also shorten it a few leds at the beginning to see if the malfunction is there. Twist the ledstrip around, press the leds with fingers while running Hyperion and/or effects with the Hyperion app ( its free) to see if the leds is coming to life.
sometimes it happens that a ledstrip is just faulty, it can happen.

Thanks, I'll try this on Wednesday when I have the time for it. I still have a second SK6812 here which I actually wanted to return but I'll give it a try.

Zitat von Lighting-guy77

only data is connected on one side only then.
GND and +5 volts is brought together

Do I connect it like in V1 or V2? Sorry if this is an obvious answer but I'm very new to this whole stuff.

On a side note, thanks for all the help, I really appreciate it!

Imperius_Sha · 23. Mai 2021

Zitat von Lord-Grey

Does a simple color effect started via the Remote Control Screen work?
Suggest you disable smoothing for th

I disabled smoothing and tried a simple color effect in remote control, sadly this doesnt Work either. Does that mean my Led Strip ist defect?

Imperius_Sha · 23. Mai 2021

Zitat von Lighting-guy77

The SPI packet size is maximum 4096 and probably you are over the max, but that default value can be changed.

So I added spidev.bufsize=1024000 in /boot/cmdline.txt. It also shows that the value changed.

Sadly the LEDs are still not lighting up. These are my current settings:

Good news is that there are no more errors in the log!

Code

2021-05-23T10:01:00.644Z [hyperiond DAEMON] (INFO) CEC handler created 2021-05-23T10:01:00.658Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/ 2021-05-23T10:01:00.662Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/ 2021-05-23T10:01:00.664Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /.hyperion/custom-effects 2021-05-23T10:01:00.701Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized 2021-05-23T10:01:00.704Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default 2021-05-23T10:01:00.704Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled 2021-05-23T10:01:00.727Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx' 2021-05-23T10:01:00.728Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0 2021-05-23T10:01:00.729Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 640x480 2021-05-23T10:01:00.729Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture 2021-05-23T10:01:00.729Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created 2021-05-23T10:01:00.730Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0 2021-05-23T10:01:00.981Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 640, height: 480 for capture 2021-05-23T10:01:00.981Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12} 2021-05-23T10:01:00.981Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled 2021-05-23T10:01:00.981Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled 2021-05-23T10:01:00.981Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000 2021-05-23T10:01:00.981Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created 2021-05-23T10:01:00.981Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance 2021-05-23T10:01:00.982Z [hyperiond JSONSERVER] (INFO) Started on port 19444 2021-05-23T10:01:00.733Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'sk6812spi'. 2021-05-23T10:01:00.733Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled 2021-05-23T10:01:00.733Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":256,"hardwareLedCount":256,"invert":false,"latchTime":0,"output":"/dev/spidev0.0","rate":3e+06,"rewriteTime":3000,"type":"sk6812spi","whiteAlgorithm":"subtract_minimum"}] 2021-05-23T10:01:00.733Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms 2021-05-23T10:01:00.733Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 3000ms 2021-05-23T10:01:00.733Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 3000ms 2021-05-23T10:01:00.733Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:45:init()) _baudRate_Hz [3000000], _latchTime_ms [0] 2021-05-23T10:01:00.734Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:46:init()) _spiDataInvert [0], _spiMode [0] 2021-05-23T10:01:00.733Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-05-23T10:01:00.734Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceSk6812SPI.cpp:41:init()) whiteAlgorithm : subtract_minimum 2021-05-23T10:01:00.740Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times 2021-05-23T10:01:00.740Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401 2021-05-23T10:01:00.748Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0 2021-05-23T10:01:00.783Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2] 2021-05-23T10:01:00.783Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive 2021-05-23T10:01:00.783Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started 2021-05-23T10:01:00.784Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive 2021-05-23T10:01:00.784Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled 2021-05-23T10:01:00.994Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0 2021-05-23T10:01:00.995Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1 2021-05-23T10:01:00.996Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=640 height=480 2021-05-23T10:01:00.999Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps 2021-05-23T10:01:00.999Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV 2021-05-23T10:01:01.005Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started 2021-05-23T10:01:01.005Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start() 2021-05-23T10:01:00.785Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created 2021-05-23T10:01:01.006Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started 2021-05-23T10:01:00.786Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled 2021-05-23T10:01:00.865Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active 2021-05-23T10:01:00.865Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-05-23T10:01:00.866Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-05-23T10:01:00.866Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255] 2021-05-23T10:01:00.866Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-05-23T10:01:00.988Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400 2021-05-23T10:01:00.989Z [hyperiond PROTOSERVER] (INFO) Started on port 19445 2021-05-23T10:01:00.990Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver 2021-05-23T10:01:00.991Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver 2021-05-23T10:01:01.076Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings 2021-05-23T10:01:01.076Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings 2021-05-23T10:01:01.076Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig 2021-05-23T10:01:01.076Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig 2021-05-23T10:01:01.077Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver' 2021-05-23T10:01:01.088Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate 2021-05-23T10:01:01.089Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key 2021-05-23T10:01:01.089Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver' 2021-05-23T10:01:01.089Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-05-23T10:01:04.000Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0 2021-05-23T10:01:04.001Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-05-23T10:01:04.001Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-05-23T10:01:04.001Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0] 2021-05-23T10:01:04.251Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-05-23T10:01:04.251Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0] 2021-05-23T10:01:44.405Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.43 2021-05-23T10:01:44.405Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.43' switch to Hyperion instance 0 2021-05-23T10:02:19.367Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.43

Imperius_Sha · 23. Mai 2021

Zitat von Lighting-guy77

you can ground but not on earth potential.

Only with GND pins on PI , GND on ledstrip and V- on PSU

Zitat von Mike72

Right, you can connect all ground (GND) or minus (-) from the 5V power supplies and RPi, but not from mains earth.

Thanks to both of you! I reconnected the GND cable like this:

Imperius_Sha · 23. Mai 2021

Zitat von Lord-Grey

[hyperiond LEDDEVICE] (ERROR) Device disabled, device 'sk6812spi' signals error: 'Failed to open device (/dev/spidev0.0). Error message: No such file or directory'

Thank you, I activated SPI now. Now I'm having another problem, it says that SPI failed to write.

Code

 2021-05-22T21:46:53.661Z [hyperiond DAEMON] (INFO) CEC handler created
 2021-05-22T21:46:53.676Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
 2021-05-22T21:46:53.679Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
 2021-05-22T21:46:53.682Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /.hyperion/custom-effects
 2021-05-22T21:46:53.719Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
 2021-05-22T21:46:53.721Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
 2021-05-22T21:46:53.721Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
 2021-05-22T21:46:53.752Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
 2021-05-22T21:46:53.753Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
 2021-05-22T21:46:53.754Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 640x480
 2021-05-22T21:46:53.754Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
 2021-05-22T21:46:53.754Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
 2021-05-22T21:46:53.755Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
 2021-05-22T21:46:54.230Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 640, height: 480 for capture
 2021-05-22T21:46:54.230Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
 2021-05-22T21:46:54.230Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled
 2021-05-22T21:46:54.230Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled
 2021-05-22T21:46:54.230Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
 2021-05-22T21:46:54.230Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
 2021-05-22T21:46:54.230Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
 2021-05-22T21:46:54.231Z [hyperiond JSONSERVER] (INFO) Started on port 19444
 2021-05-22T21:46:53.765Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'sk6812spi'.
 2021-05-22T21:46:53.765Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
 2021-05-22T21:46:53.765Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":256,"hardwareLedCount":256,"invert":false,"latchTime":0,"output":"/dev/spidev0.0","rate":3e+06,"rewriteTime":1000,"type":"sk6812spi","whiteAlgorithm":"subtract_minimum"}]
 2021-05-22T21:46:53.765Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
 2021-05-22T21:46:53.765Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 1000ms
 2021-05-22T21:46:53.765Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 1000ms
 2021-05-22T21:46:53.765Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:45:init()) _baudRate_Hz [3000000], _latchTime_ms [0]
 2021-05-22T21:46:53.766Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:46:init()) _spiDataInvert [0], _spiMode [0]
 2021-05-22T21:46:53.766Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceSk6812SPI.cpp:41:init()) whiteAlgorithm : subtract_minimum
 2021-05-22T21:46:53.765Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
 2021-05-22T21:46:53.775Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
 2021-05-22T21:46:53.775Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
 2021-05-22T21:46:53.782Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
 2021-05-22T21:46:53.817Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
 2021-05-22T21:46:53.817Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
 2021-05-22T21:46:53.817Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
 2021-05-22T21:46:53.818Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
 2021-05-22T21:46:53.818Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
 2021-05-22T21:46:54.242Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
 2021-05-22T21:46:54.242Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1
 2021-05-22T21:46:54.243Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=640 height=480
 2021-05-22T21:46:54.244Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps
 2021-05-22T21:46:54.244Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
 2021-05-22T21:46:54.250Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
 2021-05-22T21:46:54.250Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
 2021-05-22T21:46:53.819Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
 2021-05-22T21:46:54.251Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
 2021-05-22T21:46:53.819Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
 2021-05-22T21:46:53.899Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
 2021-05-22T21:46:53.899Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
 2021-05-22T21:46:53.900Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
 2021-05-22T21:46:53.900Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
 2021-05-22T21:46:53.900Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
 2021-05-22T21:46:53.901Z [hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 90, Message too long

Alles anzeigen

Imperius_Sha · 22. Mai 2021

Zitat von Mike72

You connected mains earth potential to 5V/Ground !
In your own interest, please remove the GND connection between the RPi and the power supply ! It's not a good idea !

Thanks for the hint, I'll fix it right away. Do I only connect the GND between the RPI and the LED Strip?

Imperius_Sha · 22. Mai 2021

Zitat von Lighting-guy77

did you power the strip from both sides on +5 volts and GND with running on that settings?

No only from one side, like this:

Do I actually have to power the strip from both sides with +5V and GND?

Zitat von Lighting-guy77

you have to set set logging level on level expert, then you see debug log and post it here
right top in UI there's a wand, click that and change level.

has to look like this

Oh, sorry didn't know that. This is the log:

Code

2021-05-22T20:34:02.044Z [hyperiond DAEMON] (INFO) CEC handler created 2021-05-22T20:34:02.060Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/ 2021-05-22T20:34:02.063Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/ 2021-05-22T20:34:02.066Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /.hyperion/custom-effects 2021-05-22T20:34:02.102Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized 2021-05-22T20:34:02.105Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default 2021-05-22T20:34:02.105Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled 2021-05-22T20:34:02.129Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx' 2021-05-22T20:34:02.129Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0 2021-05-22T20:34:02.130Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 640x480 2021-05-22T20:34:02.131Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture 2021-05-22T20:34:02.131Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created 2021-05-22T20:34:02.132Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0 2021-05-22T20:34:02.600Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 640, height: 480 for capture 2021-05-22T20:34:02.600Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12} 2021-05-22T20:34:02.601Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled 2021-05-22T20:34:02.601Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled 2021-05-22T20:34:02.601Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000 2021-05-22T20:34:02.601Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created 2021-05-22T20:34:02.602Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance 2021-05-22T20:34:02.602Z [hyperiond JSONSERVER] (INFO) Started on port 19444 2021-05-22T20:34:02.134Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled 2021-05-22T20:34:02.135Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms 2021-05-22T20:34:02.135Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'sk6812spi'. 2021-05-22T20:34:02.136Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":256,"hardwareLedCount":256,"invert":false,"latchTime":0,"output":"/dev/spidev0.0","rate":3e+06,"rewriteTime":1000,"type":"sk6812spi","whiteAlgorithm":"subtract_minimum"}] 2021-05-22T20:34:02.136Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms 2021-05-22T20:34:02.136Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 1000ms 2021-05-22T20:34:02.137Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 1000ms 2021-05-22T20:34:02.137Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:45:init()) _baudRate_Hz [3000000], _latchTime_ms [0] 2021-05-22T20:34:02.137Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:46:init()) _spiDataInvert [0], _spiMode [0] 2021-05-22T20:34:02.138Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceSk6812SPI.cpp:41:init()) whiteAlgorithm : subtract_minimum 2021-05-22T20:34:02.138Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'sk6812spi' signals error: 'Failed to open device (/dev/spidev0.0). Error message: No such file or directory' 2021-05-22T20:34:02.141Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times 2021-05-22T20:34:02.141Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401 2021-05-22T20:34:02.149Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0 2021-05-22T20:34:02.183Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2] 2021-05-22T20:34:02.184Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive 2021-05-22T20:34:02.184Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started 2021-05-22T20:34:02.185Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive 2021-05-22T20:34:02.185Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled 2021-05-22T20:34:02.614Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0 2021-05-22T20:34:02.614Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Camera 1 2021-05-22T20:34:02.615Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=640 height=480 2021-05-22T20:34:02.616Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 30 fps 2021-05-22T20:34:02.616Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV 2021-05-22T20:34:02.622Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started 2021-05-22T20:34:02.622Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start() 2021-05-22T20:34:02.185Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created 2021-05-22T20:34:02.623Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started 2021-05-22T20:34:02.266Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active 2021-05-22T20:34:02.266Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-05-22T20:34:02.267Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255] 2021-05-22T20:34:02.267Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on 2021-05-22T20:34:02.609Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400 2021-05-22T20:34:02.610Z [hyperiond PROTOSERVER] (INFO) Started on port 19445 2021-05-22T20:34:02.610Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver 2021-05-22T20:34:02.615Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver 2021-05-22T20:34:02.696Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings 2021-05-22T20:34:02.696Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig 2021-05-22T20:34:02.696Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings 2021-05-22T20:34:02.697Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig 2021-05-22T20:34:02.697Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver' 2021-05-22T20:34:02.708Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active 2021-05-22T20:34:02.947Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate 2021-05-22T20:34:02.948Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key 2021-05-22T20:34:02.948Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver' 2021-05-22T20:34:03.639Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.43 2021-05-22T20:34:03.639Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.43' switch to Hyperion instance 0 2021-05-22T20:34:05.217Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0 2021-05-22T20:34:05.218Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0 2021-05-22T20:34:05.218Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0] 2021-05-22T20:34:05.468Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240 2021-05-22T20:34:05.468Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0] 2021-05-22T20:36:18.172Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000  2021-05-22T20:36:18.977Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.43

Imperius_Sha · 22. Mai 2021

Zitat von Lighting-guy77

GPIO has to be 18 for PWMo ledcontroller ws281x

on raspberry its hardware PIN 12

or you can run on diffrent ledcontroller like SPI sk6812
GPIO 10 and hardware PIN on raspberry is 19

I just tried both versions and both didn't work, the LEDs are still not lighting up.

The only time the LEDs light up was when I used LED controller Sk6822spi/ws2812spi with GPIO 10. However, they only lit up white and only about half of them.

Zitat von Lord-Grey

An have a look into the hyperion log, if there are any errors reported…
In the Ui: System->Log

I kept checking the logs while trying Lightning-Guys solutions and there weren't any.

I also checked the voltage of the LED Strip and everything was fine. When turning off the power the LED Strip lights up completely in a dim red, if that helps.

Imperius_Sha · 22. Mai 2021

Good evening everyone,

in the last few days I have been trying my hand at an Ambilight system, however I am at a loss.

I am a complete beginner in electronics and the like and this is also my first project in this area.

Currently, the setup looks like this using a BTF-SK6812:

At the Raspberry Pi 4b a corresponding image signal arrives, as can be seen on this picture:

My Hyperion settings look like this:

As I said before, I'm absolutely new to this stuff, so I'm at a loss at what I am missing or how to fix this. Any help would be greatly appreciated.

Beiträge von Imperius_Sha

LEDs not working

LEDs not working

LEDs not working

LEDs not working

LEDs not working

LEDs not working

LEDs not working

LEDs not working

LEDs not working