Posts by Danielsweden

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 10:08 PM

now i have 7 white thats lightning

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 9:55 PM

okay=( im gonna trow it in the trashcan. now im tired of this shit

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 7:53 PM

nothing happends. Its all black

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 7:50 PM

In Hyperion ? Not the app?

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 7:30 PM

No respond in Hyperion APP.

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 7:29 PM

I have doubble GND now. Only One led is working and thats One Green first of THE led

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 7:21 PM

Yes i mean pin 6 ? data om gpio 18 and GND on pin 6 i have now. So i need two GND?

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 12:36 PM

First blue then White and green only

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 11:59 AM

and there is the ground to pin 3 om RPi? ( Ground pin )

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 28, 2021 at 11:58 AM

This Green to gpio 18?

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 20, 2021 at 4:26 PM

I can send you some pics

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 18, 2021 at 10:07 PM

Is this right?

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 18, 2021 at 10:03 PM

So why it is only a few leds lighting and not respond to THE app?

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 18, 2021 at 8:33 AM

Same here i have follow the tutorials but not working ? only few leds Shining. App dont work. The PSU is 5v. Ledstrip is okay.

Gpio 18 + same gnd for RPi and PSU.

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 17, 2021 at 11:53 PM

I have separate power supply to. And same setup like you but longer light strip.

I have try DTparam audio off but nothing special happends.

THE light not respond in Hyperion App so im loss to

Idont know what to do!! ? Im so tired of this. Nothing works

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 17, 2021 at 10:41 PM

I have test with a 1,5m strip but even that dont lights up full

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 16, 2021 at 10:20 AM

How do i config that?

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 15, 2021 at 11:59 PM

Okay. Om testing with the Hyperion App now and THE leds are dead. No response.

I have write in THE IPadress of THE pi and port 19444. Or do i need My port thats :8090?

Do i need to config Hyperion to run as Root?

Only 5 is Up. No response from app

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 15, 2021 at 11:49 PM

Quote from Mike72

I would try it with a new LED stripe, probably several LEDs are already damaged. MeanWell LRS-75-5 is a good choice.
First of all, the LEDs should work correct with RPi and the Hyperion App, colors and effects. Then you can go to the configuration, splitter, capture card and the other stuff. And don't forget to set stable 5V under full load (white color). Good luck!

What pins om gonna use for best result? Gpio 18 and grund? Or gpio 21 ?

Danielsweden · dead led strip ws2812B raspberry pi3B Danielsweden June 15, 2021 at 12:14 AM

Tnx for all advise. I have also test The strip with Hyperion App but No response. Only first green led as before. Im gonna mesure the strip. Hmm i have like 1m left so i can test with before i buy a new One IF This 1m strip lights up the other strip is bad.