I also tried to install Hyperion on windows but the led doesn't work the same. I give up. I thank you all the same. Next time I come to Germany I have to offer you a beer ....
Beiträge von luxbarba
-
-
I activated the "expert" mode, I set the RGB mode to "output mode", loaded the effect but it doesn't work:
Here is the log:
-
Does your Yeelight have a good WiFi connection?
I think so. I use the strip with Home assistant, Homekit and Google Home and it never gave me any problems. I am attaching the values of the wifi power:
Are you running the latest firmware?
Yes
Did you enable LAN Control?
Yes
In addition, can you run the wizard again and share the log-output afterwards, please?
On the net I read something about "Hyperion Yeelight Bridge". Do you need to make the device work better?
I wouldn't want the problem to be the Hyperion version on Home Assistant
-
-
I reset the led, restarted hyperion and launched the test but it doesn't work. The strange thing is that as I said in the first post, if I click on the "Identify" button, the LEDs light up. Here is the log:
For completeness I want to specify that the LED is placed on three sides of the TV (above, right and left) and I have selected the "whole picture" option in the guided configuration.
-
-
-
To see, if your Yeelights work, I suggest you first run a simple color effect or another effect via the Remote Control
I didn't understand how run a simple color effect or another effect. Could you explain to me in detail what I have to do?
-
First of all thanks for your answer. I did as you said. I'm trying to use the leds via the "Android Hyperion Grabber" android tv app and it doesn't work. I am not using any usb capture device. Is there any incompatibility with yeelight strip? I used local videos as a test since I read that videos on Yotube and netflix don't work.
-
Hello everybody. I have installed Hyperion NG on Home assistant (version: 2.0.0-alpha.10). I can't get the yeelight leds to work(model: yeelight lightstrip plus). The automatic configuration of the lights with the yeelight wizard does not work:
With manual configuration, hyperion recognizes the lights:
If I click on the "Identify" button, the LEDs light up
The problem is that it doesn't make me modify the "Hardware LED count" (They remain set to 1 and cannot be changed)
Consequently it does not make me modify the "Led Layout" giving me this error:
This is the log: