Do I need to update anything other than the commands: apt update & apt full-upgrade?
Beiträge von Alijon39
-
-
Yes the voltage is ok i tested it and it was 5 V and 950 mA
-
I use max_usb_current=1 and also use a powered usb hub but the problem still exist.
also i think other than the capture card, other devices such as flash memory and wireless mouse adapter will not work.
Does it need to activate anything?
-
I updated it by apt update & apt full-upgrade but it made no difference
dmesg
Code
Alles anzeigen[ 0.158684] bcm2835-mbox 2000b880.mailbox: mailbox enabled [ 0.191089] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-03-24T13:20:54, variant start [ 0.201122] raspberrypi-firmware soc:firmware: Firmware hash is e5a963efa66a1974127860b42e913d2374139ff5 [ 0.260669] Kprobes globally optimized [ 0.271077] bcm2835-dma 20007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.274771] SCSI subsystem initialized [ 0.275393] usbcore: registered new interface driver usbfs [ 0.275574] usbcore: registered new interface driver hub [ 0.275735] usbcore: registered new device driver usb [ 0.276308] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 3.569001] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 3.572458] Dedicated Tx FIFOs mode [ 3.614914] WARN::hcd_init_fiq:497: MPHI regs_base at dc810000 [ 3.620963] dwc_otg 20980000.usb: DWC OTG Controller [ 3.624111] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1 [ 3.630208] dwc_otg 20980000.usb: irq 56, io mem 0x00000000 [ 3.633451] Init: Port Power? op_state=1 [ 3.636566] Init: Power Port (0) [ 3.640164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 3.646419] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.652866] usb usb1: Product: DWC OTG Controller [ 3.656218] usb usb1: Manufacturer: Linux 5.15.32+ dwc_otg_hcd [ 3.659536] usb usb1: SerialNumber: 20980000.usb [ 3.664162] hub 1-0:1.0: USB hub found [ 3.667550] hub 1-0:1.0: 1 port detected [ 3.672331] dwc_otg: FIQ enabled [ 3.672371] dwc_otg: NAK holdoff enabled [ 3.672389] dwc_otg: FIQ split-transaction FSM enabled [ 3.672422] Module dwc_common_port init [ 3.673080] usbcore: registered new interface driver usb-storage [ 3.676976] mousedev: PS/2 mouse device common for all mice [ 3.684634] sdhci: Secure Digital Host Controller Interface driver [ 3.688095] sdhci: Copyright(c) Pierre Ossman [ 3.692478] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.697764] ledtrig-cpu: registered to indicate activity on CPUs [ 3.702188] hid: raw HID events driver (C) Jiri Kosina [ 3.705955] usbcore: registered new interface driver usbhid [ 3.709342] usbhid: USB HID core driver [ 3.720707] Initializing XFRM netlink socket [ 17.812799] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 17.812864] [vc_sm_connected_init]: start [ 17.859148] [vc_sm_connected_init]: installed successfully [ 18.051377] videodev: Linux video capture interface: v2.00 [ 18.193069] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 18.198612] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 18.208409] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 18.231968] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 18.295381] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 18.298096] bcm2835_audio bcm2835_audio: there is not valid maps for state default [ 18.357311] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 18.362067] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 18.378507] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 18.390762] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 18.402476] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 18.402561] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 18.402612] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 18.402663] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 18.402700] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 18.450798] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 18.451822] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 18.471040] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 18.475062] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 18.475147] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 18.475198] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 18.475238] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 18.475274] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 18.475700] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 18.475789] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 18.476540] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 18.494251] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 18.494355] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 18.509768] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 18.509895] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 18.535776] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 18.535893] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 18.560065] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 18.560172] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 20.376306] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 20.934747] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 20.959589] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 21.650962] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 21.930942] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 21.933593] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.bin failed with error -2 [ 21.934458] usbcore: registered new interface driver brcmfmac [ 21.964816] checking generic (1eace000 12c000) vs hw (0 ffffffff) [ 21.964983] fb0: switching to vc4 from simple [ 21.989133] Console: switching to colour dummy device 80x30 [ 22.014167] vc4-drm soc:gpu: bound 20400000.hvs (ops vc4_hvs_ops [vc4])
-
it's working very fine in PC but in hyperion not detected.
usb-devices:
CodeT: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=05.15 S: Manufacturer=Linux 5.15.32+ dwc_otg_hcd S: Product=DWC OTG Controller S: SerialNumber=20980000.usb C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
lsusb
-
Hi guys
I installed last version of hyperion on raspberry pi zero w. Any thing was well but in usb active menu didn't detect my video capture please help me to fix it.