Posts by Kiasho

I've set up using a pi4 with usb grabber and switch after not having everything setup for several months and I'm getting sound drop outs both when watching sky and also when watching anything on firestick 4k max. It's happening when led's arent even switched on and does seem to happen more often watching sky than firestick. I should mention all external devices run through my denon amp which is the same as when i had it setup before and don't remember this being an issue then.

I've noticed today that i have no sound from several channels on sky Q im using a ezcoo splitter and I've tried running the hdmi straight from my avr to tv and this cures the issue so I'm guessing its a setting issue on the splitter any guidance would be appreciated.

I now have no led's working at all but havent changed anything so i think it was my wled that was showing led's earlier not the hyperion im not sure what to try to fix it.

So I've set the ezcoo up as you suggested and all led's work but although my sky q box now lets me select uhd its only allowing 8 bit but i know my tcl tv supports hdr10+ am i missing something on the ezcoo that would fix this.

Update on trying the sky q again i tried the find it for me and this time it selected 10 bit so all looks good now.

Thanks

Thank you i should be able to follow that

It does yes ive ordered the ezcoo splitter but im unsure how i set it up as in which hdmi's go where etc any advice would be much appreciated.

My current setup is all my equipment connected to denon avr then the hdmi out goes to a rybozen 4k capture card then to the single 2.1 hdmi my tv has my issue is that using the setup this way means my sky q box wont allow me to select uhd resolution only 1080i and my firestick isn't allowing dolby vision and hdr.

Would a splitter sort out the issues im having if so where in the chain do i put it.