[COLOR=rgb(39, 42, 52)]So I've been building my own RPI3 Ambilight setup using OSMC with Hyperion and WS2081 LEDs however I came upon a hiccup once I set it all up. When plugging the LED into the Raspberry Pi, I get an output that looks something like this: [MEDIA=imgur]id=a%2FbDARX;type=album[/MEDIA]
Some of the lights are powered (however they don't function as per Hyperion), some of them are half powered and some are off. I tested all the LEDs beforehand using an Arduino and all of them are functioning correctly, so it's likely something to do with my setup.
I'm powering it all using a 5V power supply wired using a stripped PC power cable. Not sure if that could be the issue.
I was wondering if anybody had advice regarding possible steps of troubleshooting steps I could look into, rather than just pulling the whole thing down and resoldering all the connectors.
Thanks, guys.[/COLOR]