First of all, thank you so much for support!
okay, I have got installed Hyperion on my old Pi Zero W aaaand it is working absolutely perfekt.
Any idea if the pi 3, wich I use before, will be supported in Hyperbian some times?
First of all, thank you so much for support!
okay, I have got installed Hyperion on my old Pi Zero W aaaand it is working absolutely perfekt.
Any idea if the pi 3, wich I use before, will be supported in Hyperbian some times?
thank you both for your help.
I use the version 2.0.16
Where to use a command line in hyperion? Sorry for my stupid questions but I use these tool since 2 days
if I run top | grep hyperion on the Hyperbian OS the system freezes. The cat /... command ends in an error message
here we go with the cat result, sorry
pi@pi:~ $ cat /proc/cpuinfo
processor : 0
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Revision : 9020e1
Serial : 0000000088a42fd7
Model : Raspberry Pi 3 Model A Plus Rev 1.1
pi@pi:~ $
and here we go with the top command result, sorry again
pi@pi:~ $ sudo top | grep hyperion
[1]+ Stopped sudo top | grep --color=auto hyperion
Hi all,
I had bought this LED's on Amazon and I have some issues to bring them to life on a Pi 3A+
The setup is new, it's my first Hyperion Project.
The setup based on this youtube video.
It seems that hyperion doesn't see the stripe, see protocol below.
Any idea how to solf this issue?
Thanks in advance
Timo
2024-03-29T08:51:17.413Z [LEDDEVICE|First LED Hardware instance] (ERROR) Device disabled, device 'ws281x' signals error: 'Failed to open. Error message: Hardware revision is not supported'
2024-03-29T14:46:33.800Z [LEDDEVICE|First LED Hardware instance] (ERROR) Previous line repeats 6 times
2024-03-29T14:46:33.801Z [LEDDEVICE|First LED Hardware instance] (ERROR) Device disabled. Maximum number of 6 attempts enabling the device reached. Tried for 105 seconds.
Tag zusammen,
Kann mir jemand sagen, ob diese LEDs support werden?
Kriege das nicht zum laufen, grundsätzlich scheint das Setup aber zu stimmen
Protokoll sagt folgendes:
2024-03-28T21:30:51.095Z [LEDDEVICE|First LED Hardware instance] (ERROR) Device disabled, device 'ws281x' signals error: 'Failed to open. Error message: Hardware revision is not supported'
2024-03-28T21:30:51.946Z [MUXER|First LED Hardware instance] (ERROR) setInput() used without registerInput() for priority '254', probably the priority reached timeout
2024-03-28T21:32:21.180Z [LEDDEVICE|First LED Hardware instance] (ERROR) Previous line repeats 6 times
2024-03-28T21:32:21.180Z [LEDDEVICE|First LED Hardware instance] (ERROR) Device disabled. Maximum number of 6 attempts enabling the device reached. Tried for 105 seconds.