Yes you're right these adjustments where made to achieve an acceptable white otherwise the white would be blueish. The pure colors (red, green, blue) are still correct if I change it to 255 but as I said the white would be blueish.
Edit: Ok it was my fault :unsure: I was just too stupid to count the wrong numbers of LEDs at the top of my TV.... thought the number were definitely correct...
Unfortunately the reversing didn't change anything 
I attached my config file and also the screenshot taken from HyperCon (which is basically showing my led's set up). I also checked if left/right side are flipped using a rainbow swirl but everything is fine. It seems like the LEDs are somehow downshifted.
If I use a pure picture it works perfectly fine. So all LEDs are red (or blue or green).
Hello,
I tried to configure Hyperion using HyperCon. I typed in the correct number of LEDs at each side. But if I look at an RGB picture (like the one attached) it seems that the colors are shifted downwards. So in the attached picture there are no LEDs showing the blue color like you can see on the TV.
I also played around with the horizontal/vertical gap in the HyperCon tool but nothing changed.
Is the grabber (internal one) maybe wrong configured? I left these settings as default (64 x 64).
Thanks for your help!
